Question about Karcher Garden

Open Question

Replace a water inlet valve on a model 320 Karcher spray washer

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Unloader Valve - Karcher Pressure Washer

where is the unloader valve locaed on a Briggs Stratton pressure washer?

Posted on Oct 03, 2009

cool78259
  • 228 Answers

SOURCE: My Karcher 330 M has blown two water inlet (

I have a larger gas powered karcher, just make sure the water going to your karcher is not obstructed from its path. on mine i bought a goodyear hose that can be purchased at northern tools or any hardware store. and use it just for pressure washing. good luck!

Posted on Jan 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

IT HAS PRESSURE BUT IT PULSATES INSTEAD OF STEADY SPRAY


I have same model with same problem. Tried the easy fixes:
unloader valve lube and clean, inlet water sufficient, and nozzles and hose are fine. Broke down pump and called for parts (about $50 for 3 inlet valves and some seals) hopefully this will fix it. Mine has been used in my business pretty hard for a few years, so not bad.
Joebro

Jun 11, 2011 | Karcher G 2600 VH Gas Pressure Washer

1 Answer

My Karcher 720mx moter is working fine but i have no water pressure coming from pump


hi put some silicon spray in inlet and outlet then reconnect hoses what is going on is when you store it the seals start to dry out.........

Jan 13, 2011 | Karcher K3.68MR Electric Pressure Washer

1 Answer

My Karcher 330 M has blown two water inlet ( Garden hose inlet ) elbows. Replaced one and then after about 5 min operation shut off the valve on the wand and immediately the new elbow split the same as the...


I have a larger gas powered karcher, just make sure the water going to your karcher is not obstructed from its path. on mine i bought a goodyear hose that can be purchased at northern tools or any hardware store. and use it just for pressure washing. good luck!

Dec 23, 2010 | Karcher PSI Electric Pressure Washer

1 Answer

Was using Karcher and then suddenly no pressure. Motor seemed hot


not sure about this model but some of them had mototrs that ran constantly wether the trigger was squeezed or not.
on these models there was a pressure relief valve just inside the water hose inlet connection which have been know to work loose.
if not the above type the discount the relief valve
the water pump usually comprises of 3 pistons and various valve assemblys you would need to take the pump apart and check theses parts some had three large nuts that contain the valves .
hope this info is of some use to you

Apr 04, 2010 | Karcher K2.26 Electric Power Washer

2 Answers

Karcher is spraying water from inside the unit, it actually a k2.97, any ideas please


Hi I have water spraying from air vent/intake on side of my k370 can you help ?

Mar 01, 2010 | Karcher K2.26 Electric Power Washer

1 Answer

Vacuum lock when releasing trigger. water will


It sounds like the valve in your trigger gun is sticking. Depending
on the model it can be rebuilt or repaired

Sep 08, 2009 | Karcher Garden

2 Answers

Karcher 2400 psi washer- no pressure


if the water is flowing
the valves need to change
if no water pistons in pump need to change.

Jul 22, 2009 | Karcher 2500 PSI Pressure Washer

1 Answer

Water coming out of washer


Depending on the model of the machine, it is most likley a cracked control head or split outlet elbow. Remove the covers and run the machine to locate the source of the leak. Ifit is the control head it will spray water from the top just behind the chemical inlet elbow.

Feb 06, 2009 | Karcher K2.26 Electric Power Washer

1 Answer

I have a karcher 411 A jet washer, there doesn't seem to be enough pressure to do the job. I have bought a new wand but it doesn't seem to make any difference, any ideas, what am I doing wrong


Check to see if there's good water volume coming through the hoses attached to the washing machine. If there is, check to see if the screens inside the water-inlet valve are clean. (The water-inlet valve is the device on the washing machine that the fill hoses are attached to.) If they're clean, you probably have a defective water-inlet valve. If so, you should completely replace the valve.

Aug 31, 2008 | Washing Machines

2 Answers

Maytag atlantas top loader water keeps dripping from top of drum


Your water inlet valve is probably leaking by. If the water pressure is too, or if there is sediment build inside the valve, sometimes the solenoids will not close properly. Try cleaning the valve to see if this helps. If not, I would recommend replacing it. Depending on which valve you have, repairclinic.com has two listed for this model washer for $20 to $30. Let me know if this helps, or if you need further assistance.

Apr 23, 2008 | Maytag Atlantis MAV6260AWW Top Load Washer

Not finding what you are looking for?
Garden Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Karcher Garden Experts

John Trevino

Level 3 Expert

1383 Answers

andy just round the...

Level 1 Expert

47 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Karcher Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...