Question about Janome 7034D Sewing Machine

1 Answer

I can hear a clicking when serging

I can hear a clicking noise when serging (Janome Magnolia) or turning the handwheel. It seems to happen right as the needles are coming down towards the plate.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Contributor
  • 53 Answers

Sounds like your looper timing is off. you will have to have your local shop re-time it. Find a shop that gives free estimates first.

Hope that helps,
-Chris

Posted on Jun 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I just got a new Janome 8002d serger. Why does it make a clicking noise when I begin to serge and then it goes to straight stitching that comes unsewn.


I don't have a Janome, but you might check your threading to see if it's correct, lucky you to get a new one!!!

Mar 05, 2015 | Janome Sewing Machines

1 Answer

My janome magnolia was working just fine and then all of the sudden the bobbin thread keeps knotting up. i've gone over all troubleshooting, cleaned out the lint, replaced the bobbin - all to no avail......


This happened to me on several occasions and finally one service tech told me not to use the needle down auto button. Instead when threading the bobbin just move the wheel toward you slowly until the thread catches.

Jul 08, 2014 | Janome Magnolia 7330 Sewing Machine

1 Answer

Janome JW5622 handwheel keeping getting stuck


how do I use the free motion plate on my janome jw5622??

Jan 26, 2014 | Janome Sewing Machines

1 Answer

Janome hello kitty 525 won't feed fabric or needle does not move up and down. Everything seem to be thread correctly and clean.


Hi Thi: make sure the machine is not set to wind the bobbin. Turn the handwheel towards you and see if the needle moves. You may have a belt that has come off. Does the machine make noise like the motor is running when you press the foot control?

Sep 02, 2013 | Janome Sewing Machines

1 Answer

I need instruction manual for Magnolia 7318


Janome Magnolia 7318 (Sewing-Quilting Machine) user manual, guides and product documentations.
http://janome.imvoi.com/sewing-quilting-machine/magnolia-7318.html

Look under available documents and click on "Janome Magnolia 7318 User Manual".
This opens the user manual in PDF format.
You can save the PDF to your local computer to refer to any time without going online.

Dec 03, 2011 | Janome Magnolia 7318 Sewing Machine

2 Answers

Need the tension settings for a Magnolis 7034D machine. Kids turned them all.


Hi
There are a partial manuals available for Janome Magnolia machines available on their site.
http://www.janome.com/documents/File/ManualFile/Inst%20Book%207034D%20(English).pdf
The tension settings are included on page 27 of the manual.
Hope this helps!

Sep 29, 2010 | Janome 7034D Sewing Machine

1 Answer

Janome MyLock 634D serger won't serge and the handwheel is stuck after I removed a piece of fabric that was stuck by the knife.


if the handwheel won't turn, i'd double check nothing is still stuck. also, make sure you didn't half disengage the blade as they have several positions ( so you can disengage it for rolled hem etc) If you can't find anything I'm sorry to say something may have been damaged when the fabric got caught.

Sep 14, 2010 | Janome MyLock 634D Mechanical Sewing...

1 Answer

Letture leaf edging


From "Serge With Confidence" by Nancy Zieman:

Set the machine up for a 3-thread rolled edge. Normal width; length 1 - 2.

Use Woolly Nylon in the loopers & regular thread in the needle.

Lock or disengage the cutting blade.

Guide fabric along the right edge of the presser foot.

Stretch and equal amount from fron to back while serging.

Lower the differential feed, if available to about 0.6.

Serge at a slow to moderate speed.

Practice with scraps first.

After serging, gently stretch & release the fabric edge after serging.

Apr 01, 2010 | Janome MyLock 634D Mechanical Sewing...

1 Answer

Janome left needle thread breaking CONSTANTLY


Sounds like a tension problem. Your machine should have two tension adjusters. One for each needle. The book that came with your machine will tell you how. Another possibility is a bent needle.

Feb 27, 2009 | Janome MyLock 634D Mechanical Sewing...

Not finding what you are looking for?
Janome 7034D Sewing Machine Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Eva Hack

Level 1 Expert

25 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...