Question about NEC Televison & Video

Open Question

Power light orange status light flashing red NEC VT58 Projector

Power light orange status light flashing red

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Gigatech
  • 259 Answers

SOURCE: Status light blinking red

If it is a lamp error try this:
When the lamp exceeds 2100 hoursof service, the projector cannot turn on and the manu is not displayed. Do the following:
For VT670/VT470 Press the help button on the remote control for a minimum of ten seconds.

For VT570/VT47 Press and hold the power and the exit buttons on the remote control simultaneously for a minimum of ten seconds. When the lamp time clock is reset to zero, the lamp indicator goes out. Hope this helps! :]

Posted on Feb 27, 2008

Ad
  • 31 Answers

SOURCE: Status Light Flashes Red

first did you getthe lamp from miths and if notyou could have bought a bad lamp. you need to get a lamp form mits if you did not buy from them. if you did buy from mits have them replace the lamp it has a 90 day warranty. try hitting the menu and device / input buttons for 5 sec and repost the blink code. it is a 2 digits blink code. (ex. 23 or 33 or 26 like that)

Posted on Apr 24, 2008

  • 2920 Answers

SOURCE: NEC VT560 LCD Projector - Projector Colour probs

replace the bulb

Posted on Nov 21, 2008

daniel719
  • 240 Answers

SOURCE: EPSON POWERLITE BULB REPLACEMENT PROBLEMS

ok
look at your users manual.
all epson models need to have lamp life reset befor the lamp will light.

I have had this same problem befor.

Daniel.

Posted on Jan 11, 2009

  • 2 Answers

SOURCE: NEC VT 470 projector won't work at all

Try pressing the HELP button. Don't release and press the power button. The LED lights should blink. Release then try to power on again.

Posted on Apr 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

NEC lt240 lamp light stays off and power light is orange, no Image


COULD HAVE HOUR COUNT LAMP LOCKUP YOU WILL NEED TO RESET HOUR COUNTER BY USING BUTTON CONFIG AND MAINS.

john

www.jvsvisual.com

Apr 15, 2013 | NEC LT 240 Multimedia Projector

1 Answer

My NEC vt 595 was working fine last night and today i went to turn it on the status and power light started flashing red and orange and there is no picture


if Power is flashing orange - then it's cooling down

if Status is flashing red - then there are 4 flash combinations.
1 cycle (0.5sec On, 2.5sec Off) lamp cover or housing error
2 cycle (0.5sec On, 0.5sec Off) temperature error
4 cycle (0.5sec On, 0.5sec Off) fan(s) error
6 cycle (0.5sec On, 0.5sec Off) lamp error

Which is your condition?

Mar 18, 2011 | NEC VT595 LCD Projector

1 Answer

Turn on the projector the power light flashes green with status as green then it goes to a flashing orange light


there should be a status for the lamp light; check to see if this one turns red. If it does count the consecutive blinks if it is 6 then replace the lamp

Apr 15, 2010 | NEC VT800 LCD Projector

1 Answer

Nec projector vt440 wont turn on


Hello. First check the lamp! From your description, it sounds like the projector is telling you that the lamp needs to be replaced. In "eco mode", when the power is green and the status is steady orange, that is the error message. In "high brightness mode" the status will be steady red. Hope I helped you.

Feb 22, 2009 | NEC MultiSync VT440 Multimedia Projector

2 Answers

Power light flashin orange, status light flashing red on WT610 NEC


if the status light is flashing .5 seconds on and 2.5 seconds off - you need to replace the lamp cover correctly.
if the status light is flashing .5 seconds on and .5 seconds off in 2 - 6 cycles the error is: 2 cycles - the projector is overheated. Move the projector to a cooler location, or/and remove dust in the light path. 3 cycles - the power unit is not working correctly. 4 cycles - the fans are not working correctly 5 cycles - lamp fails to light. Wait a full minute and then turn on again.

Jan 25, 2009 | NEC WT610 DLP Projector

1 Answer

NEC MT820 Projector


Press and hold the power button on the remote control for 10 seconds.

Sep 07, 2007 | NEC (MTLAMP820/1020) Projector Lamp for...

1 Answer

Status indicator blinks RED, not starting.


There are different rates at which the status light will blink to indicate various errors. See manual (link below) page 49 http://www.support.nec-display.com/dl_service/data/user_manual/ENGLISH/VT37/vt37_manual_e.pdf

Jul 29, 2007 | NEC VT37 Multimedia Projector

4 Answers

Flashing red status light on NEC VT45 projector


make sure the doors are shut all the way! there is a little button there.

Feb 13, 2007 | NEC MultiSync VT45 Multimedia Projector

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a NEC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...