Question about Nordic Track Exercise & Fitness

Open Question

Nordic Track treadmill incline problem.

Just finished repair (cracked frame) and reassembly of Nordic Track 7000 R treadmill. The machine operated flawlessly prior to this repair but now the power incline runs through only a very limited cycle - I would guess between 0-3%. I've run the machine through the manufacturers calibration mode several times but with no success - it only recalibrates within that limited cycle. I thought I was very careful but could I have reassembled the machine in such a way to create this problem? This limited incline cycle runs smoothly and with no apparent mechanical impediment or strain. Any suggestions would be greatly appreciated. BTW the model is NTL2295.

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Nordic Track A2250 Pro stuck inclined

My Nordic Track Treadmill A2250 is stuck on the 12% incline position and it wont go back down and I have tried to reset it by turning it off, switching the reset button to off and then on or even unplugging it several times. What would be my next move?

Posted on Feb 13, 2011

  • 33 Answers

SOURCE: Moved treadmill to new room

hi, check incline sensor wire may be discount

Posted on Oct 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Nordic Track T7si treadmill is on incline up and down. Goes up and down and nothing else.


If you wish to get some details about treadmill repair ; visit the site linked here. Pull up older posts...
http://electro-medical.blogspot.com/

Jan 19, 2017 | Nordic Track Exercise & Fitness

1 Answer

My Old Nordic Track Pro is Broken, Can It Be Fixed?


well it possibly could be fixed but finding the person that will fool with it might be close to impossible so perhaps the trash bin and buy a new one .

Jun 13, 2015 | Nordic Track Exercise & Fitness

1 Answer

Not incline or declining


I expect there is a limiter switch that tells the treadmill when it has reached its maximum elevation. The switch is probably either malfunctioning or broke.

Feb 27, 2014 | Nordic Track Exercise & Fitness

1 Answer

Why does my Nordic Track Reflex 4500 Pro incline automatically when I start it up?


You must tried again the s.calibration, for easy diagnose, and troubleshooting.
However you must Adjust the speed sensor, test it, clean it, and tight any plug or connector, see the diagrams attached and proceed according.
2) Lube the elevation motor, the shaft + gear, test the motor itself for open or short. see the diagram attached. If you machine use RELAIS test it for dirty, or open and repair.
God bless you
11_27_2012_10_49_15_pm.gif11_27_2012_10_50_02_pm.jpg

Nov 27, 2012 | Nordic Track NordicTrack Reflex 4500 Pro...

1 Answer

How to activate my ifit


I will try to help you, the feature of software is the same. you can do it, activate your ifit. Nordic Track C2050 ACTIVATE IFIT -The Nordic Track C2050 is a treadmill that was targeted toward the budget-minded fitness enthusiast. It is a model of treadmill that is no longer being manufactured by the company. When it was still being manufactured, it developed a reputation for being an entry-level treadmill that featured a console that was easy to read because of its brightness. 1. Incline Change

o The Nordic Track C2050 allows users to change the incline of the treadmill with a simple touch of a button. This treadmill features both increase and decrease buttons for the incline. The incline of the machine will change by .5 percent every time the buttons are pressed. With each press on the incline buttons, the machine will take a moment to actually reach the incline setting that was just selected.
Capacity of Weight

o Users who are larger than or weigh more than the average person will be pleased with the added capacity of weight that the Nordic Track C2050 allows. Unlike most treadmills in its economy class that only allow a weight limit of 200 to 250 pounds, this model lets users who weigh as much as 300 pounds use the machine safely. Larger people can get the benefits of a cardiovascular workout on this treadmill without worrying about damaging it.
Heart Rate Measurement

o This Nordic Track model allows users to measure their heart rate. All the machine requires is for users to place their feet on its foot rails and grasp the metal contacts with their hands. The Nordic Track C2050 then works to determine your pulse, and the symbol of a heart will eventually show up in the display. After a couple of dashes show up, your heart rate will be displayed. Users who want to be certain of getting an accurate reading should ensure their hands are clean when gripping the metal contacts.


sincerely. God bless you.


E.CUADRA

MANAGUA, NICARAGUA. C.A.

Oct 22, 2011 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

Hello, WE have the model 4100i treadmill and the elevation is stuck in the highest position and won't reset to zero. How do I fix this or who can I call for this repair? Thanks, Tom


Try the calibration procedure found in the troubleshooting section of your manual first. Here are the basic instructions.
With the key in the console, press one of the Incline buttons. While the incline is changing (or the numbers on the console) , remove the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline.
If it still doesn't move, remove the cover. Find the incline motor. You will see a slot in the end of the motor. Using a drill with a standard slotted screwdriver bit, spin the motor counterclockwise (if it is having difficulties spinning, turn clockwise instead) for just a couple seconds. Now do the calibration procedure again.
I have had machines that got stuck before. Once released and recalibrated, the operation was OK.
The service number for your machine is found on the model number sticker on the frame of the treadmill.

Feb 26, 2011 | Nordic Track Nordictrack Apex 4100i...

2 Answers

Nordic Track A2250 Pro stuck inclined


My Nordic Track Treadmill A2250 is stuck on the 12% incline position and it wont go back down and I have tried to reset it by turning it off, switching the reset button to off and then on or even unplugging it several times. What would be my next move?

Apr 05, 2010 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

Hello I have a Nordic Track A2050 treadmill and it has worked flawlessly till today, The unit was open (unfolded) and I wanted to close it because I nearly killed myself tripping over it, so I turned it on...


Hello there, The machine is attempting to do an incline calibration. Keep the unit lowered as you have it, reinstall the safety key, allow the unit to go all the way to the top and then all the way to the bottom. The machine will stop when at the bottom and the screen will go back to normal. The machine will not overtravel the incline motor and damage it. Just let the calibration finish the procedure and you will be fine.
Good Luck! Tim
FYI this will happen anytime the safety key is removed while the incline is moving on nordictrack brand machines.

Jan 11, 2010 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

I have a nordic track a2350 and the belt stopped working, the incline works and the top part lights up. What do i need to do?


This is usually related to the control pwb which is located under the motor "hood".
You can get this part from iconservice.com by going to the replacement parts section of the site and entering the model number of your machine, Which is located on the lower frame assembly below the walk belt. After you have receieved the part you can follow this procedure to repair it.

http://www.fixya.com/support/t3807308-belt_goes_full_speed_when_started_shuts

Jan 05, 2010 | Nordic Track NordicTrack Treadmill, A2550

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nordic Track Exercise & Fitness Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Paul Sikkema
Paul Sikkema

Level 2 Expert

171 Answers

Are you a Nordic Track Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...