Question about Fujitsu Plasmavision 42" TV

1 Answer

My Fujitzu gets: Error Mesage Condition 2 !

My Fujitzu has the following message on screen and then turns off itself:

Error Message condition 2

What might have been the problem? Thanks.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,932 Answers

Hi,

When you get the Error message conditon 2 ,It denotes that the internal components are HOT.

Please remove the power cord from the receptacle and allow it to cool sufficeintly.

After cooling sufficiently power it ON,If you get the Error message again then remove the power cord and contact your dealer.

Thanx

Posted on Jul 22, 2010

  • Bijou Choulot
    Bijou Choulot Dec 31, 2010

    THIS IS JUST ALMOST WORD FOR WORD WHAT THE MANUAL SAID

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My machine will not complete cycles


timer or control panel fault

if the water wont fill that is one error message
faulty water inlet solenoid

Jul 19, 2016 | Simpson Esprit 750 Top Load 7.5kg

1 Answer

I am getting an error mesage on my hp c7250 oxc05d1381


Press and hold the '*' key on the key pad, then press the '#' key and release them both. Then enter '123' to enter maintenance mode. Press the right arrow (beside the OK button) until System Config. menu appeared on panel. Then press OK two times to clear the error condition, then cancel two or three times to return to the top menu. Then powered off and back on, printed a test page just fine, copied a document fine.

I hope this will help

Jan 26, 2012 | HP Photosmart C7250 All-In-One Thermal...

1 Answer

Hi I keep getting an error message "F27" on my


F27 OVERFLOW CONDITION
If the overflow contact on the pressure switch is closed for more than 60 seconds, an Overflow Condition occurs. In an
overflow condition, the door remains locked and the drain pump runs constantly, even if PAUSE/CANCEL is pressed twice and the display is cleared. Turn off hot and cold water faucets and unplug the unit before servicing.
1. Check the drain hose and make sure it is not plugged or kinked.
2. Unplug washer or disconnect power.
3. Check wire harness connections to the drain pump, pressure switch, water inlet value, and Central Control Unit (CCU).
4. Check/clean drain pump filter of foreign objects.
5. Check for drain pump failure.
6. Check the inlet valve for proper shut off.
7. Check the pressure switch for proper operation.

Aug 31, 2011 | Bosch Axxis WFL 2060 Front Load Washer

1 Answer

Get an error message


Hi,

Condition 1 error denotes there is some defect in the fan inside.

You cannot deal with this problem.
Please remove the plug from receptacle and contact you dealer

Thanx

Jul 31, 2010 | Fujitsu P42VHA30WS Television

1 Answer

What is solution of error oxd05d010d


Hi

This error means there is an internal error condition. To resolve this error remove the cartridges from your printer. Now wait for message "Insert the cartridges' to appear on the printer, as soon as the message appears disconnect the power cord from back of the printer. (Restart the printer if message doesn't appear) Now wait for a minute and plug back the power cord, if doesn't turns on itself then press the power button.

Insert the cartridges and check whether you are still getting the same error. If you are still getting the same error then try pressing # and 9 key simultaneously to reset the printer, wait for a while to let the printer complete the reset.

Daniel Scott

Jun 19, 2010 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Error Message: Condition 1


Error condition 1 is a faulty Fan. On these units if one fan is faulty then the sensor will shut the screen down as a protection.

a repair of this unit is possible.

Regards

May 12, 2010 | Fujitsu Plasmavision PDS-4214 42 in....

1 Answer

Acer aspire 6920 startup problem (Windows Error Recovery)


You could try booting up in safe mode by pressing F8 if you haven't already. OR, if you have the Windows operating system disc, you might try to boot off of that, or a system recovery disc. You may lose a few files, but hopefully that will get you up and running. Hope this helps!

Nov 09, 2009 | Acer Aspire 6920-6422 Notebook

2 Answers

E000732-0001 Error Message


E732 Error code details


  Main cause
 The cable connector has poor connection. The reader controller PCB is faulty.

Condition
 0001 The main controller PCB detects a fault in the communication between the reader controller PCB and the main controller PCB. Connectors
1) Connect the cable [1] for the environment heater.

ir7200-f04-309-01_e.png 2) As needed, connect the reader unit anticondensation heater cable [1].

ir7200-f04-309-02_e.png PLS RATE ME!!!!!!!THANKS MATE.

Sep 23, 2009 | Canon imageRUNNER 8500 Copier

1 Answer

Error message


My plasma display the "error message condition 1" and red flashing light start blinking and TV screen shut down. Who can halp me to fix the problem??

Jul 03, 2008 | Fujitsu Plasmavision PDS-4221 42 in....

2 Answers

5500



This error message indicates that a problem occurred with the scanner. To resolve this error condition, do the following:
  1. Turn off the printer, then disconnect the power cord.
  2. Wait 30 seconds, then connect the power cord.
  3. Turn on the printer.

May 13, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

Not finding what you are looking for?
Fujitsu Plasmavision 42" TV Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73691 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Cindy Wells

Level 3 Expert

5060 Answers

Are you a Fujitsu Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...