Question about Toys

2 Answers

I have a YIBOO AH 64 GYRO Apache HELICOPTER uj722

Hi I have a YIBOO AH 64 GYRO Apache HELICOPTER uj 722 with
lights. I have a problem this item
has one upper rotor and one lower rotor. the upper rotor operates. the lower rotor does not, I had the bottom apart the lower rotor motor is not turning while the upper rotor motor is turning if it has two motors. I do not know. Can you help? If it does have two motors and one is bad can you please explane how to take the plate off where the gear covers the two screws? please help asap
Thank you so much for your time

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Take the wheels off, but good luck finding a new motor

Posted on Mar 03, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem. Open the helicopers and you will find two wheels connected to rotors. It seems that you have to fix the connection between other wheel and rotor by moving the wheel a bit. You will feel when there is a connection since you can test it by moving the rotor from the wheel.

Posted on Nov 06, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Smya s109 top blade will come off every time i fly it.

Sounds like you have a defect or something broken. Check your parts up close and see if you can find the defect. Spare parts are available for this unit. Then again the whole units only about 20.00. Try this link for parts .

Jan 04, 2015 | Syma Brand New S109 AH-64 Gyro Helicopter...

1 Answer

Syma S109g Apache Ah-64 3.5-channels Mini Indoor Helicopter will not charge; the light will keep being red on the USB

Try bringing it to your local electronics store. It might be the connection, or in could be another electrical problem.

Jan 29, 2013 | Syma S109g Apache Ah-64 3.5-channels Mini...

1 Answer

Remove and replace balance bar?

Were you able to find a replacement balance bar? I broke mine and can't find one? Thanks!

Apr 18, 2010 | Apache RC Mini Helicopter AH-64

5 Answers

Yiboo AH-64 3D RC Mini Apache Helicopter, out of the box, charges, but will not do anything, channel C

Mine worked good for 3 days then died..Top blades wont spin.. It worked really well. The guy at (as seen on TV) shop that sold it to me actually seemed to tell me "Do not buy this!" But I bought it anyway at his word that I cannot bring it back no matter what after 24 hours..spent 90 bucks on this junk and there is NO SOLUTION

Oct 02, 2009 | RC Toys

1 Answer

I have an apache 3 channel helicopter.the top blades no longer spin so the helicopter just spins clockwise very quickly

Same problem I had. There are two motors. One to spin the top blade and a second to spin the bottom. My motor was defective out of the box to spin the top blade. Very poor quality as my AH 64 had a bad circuit board. I had to take parts from one to fix the other.

Sep 04, 2009 | Apache RC Mini Helicopter AH-64

1 Answer


Either try see it the manufacture can help or a local hobby shop might have something simular.

Jan 26, 2009 | Apache Colco Ah 64 Longbow R/C Helicopter

1 Answer

Gyro LED will not stop flashing

I had the same problem. The problem eventually turned out to be a bad connection to the antenna inside the controller. That was one of my first checks trying to trouble shoot it and it seemed tight. I got some replacement parts, changed the receiver but that wasn't the problem, I changed the antenna and it started to go intermittent. I put the old antenna back on and the connection inside finally had worked loose. So I tightened it back up and it has worked perfect ever since with original parts. So I suggest you completely loosen the antenna connection then tighten it back up again and try that.

Dec 28, 2008 | Apache Colco Ah 64 Longbow R/C Helicopter

Not finding what you are looking for?
Toys Logo

Related Topics:

1,057 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toys Experts


Level 3 Expert

102366 Answers


Level 3 Expert

75744 Answers

ray gallant

Level 3 Expert

42744 Answers

Are you a Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides