Question about Televison & Video

2 Answers

Turns on and there is no picture. I know it is a common problem and can order what-ever part it needs. I just need to know the parts that go out in these sets most of the time.

Posted by on

  • charlie rodriguez
    charlie rodriguez Jun 06, 2010

    does the light blink or anything what type of set is it (make and model) ?

  • Steve Yelmene
    Steve Yelmene Jun 06, 2010

    Vizio jv50p and the previous owner said that it made a buzzing or fizzing noise before it went out. The tv comes on and there is no picture. The caps on the power supply appear to be fine no bulges on the top. Like I say I want to know a couple of the common problems with this set so I have an Idea of where to look. Thanks

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 151 Answers

Hello, you have understanding of electronic circuts that is helpful, first you will need to aquire a service manual for this model set, you will find information for voltage outputs and check points for testing the outputs, in the service manual you have symptoms and repair procedures. you will also have schematic drawings, board location and part numbers all the info you need to repair it, the manual has a step by step procedure to figure out why theres no display. you can do a search for vizio pdf downloadable service manual sites use your search engines,, hope this helps

Posted on Jun 06, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 523 Answers

Tuners,powerboards an screens

Posted on Jun 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I just bought the JVC LT24EM71 and I hooked it up to the cable box and the picture works great but the sound is really quiet. When I unplug the cable box and plug it back in the sound comes to normal...


This is a common problem. It lies in the main board of your tv. This is where the video and audio is processed. You will need to order the main board. Let me know and if you need further information, please let me know

Apr 03, 2011 | Televison & Video

1 Answer

Constant clicking sound coming from dashboards when you use the turn signals. After turn signal turns off, the clicking sound continues forever. It always sounds like the turn signal is on.


This is a common problem with this, the problem is a bad flasher unit, this is part of the hazard light switch, you will need to replace the hazard switch and this will solve the problem, this was a bad design by gm, i've replaced 30 of these for the same problem or the signals stopped working, this part was on back order at dealer, they might sell them aftermarket (autopart store) and bt now the dealer should stock it, heres a picture of it, hope this helps.johnjohn2.jpg

Nov 03, 2010 | 2000 Chevrolet Malibu

1 Answer

Double picture and unbalance colors


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

May 29, 2010 | Hitachi 50UX26B/27K 50" Rear Projection...

1 Answer

At first picture was bowed and the colors were off. Now tv does not go on. the on light stays green for 5 seconds then turns off. Help please


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

May 09, 2010 | Mitsubishi WS-55857 55" Rear Projection...

1 Answer

I need an HDMI PCB


These parts come from yamaha so you will just have to wait, sorry. They get replaced commonly. Larry's Electronics.

Apr 23, 2010 | Yamaha RX-V661 Receiver

1 Answer

I have a Sony kp53xbr35 rp tv, the problem is that i turn it on the lights begin to turn on. the screen turns blue to blue green then red and the tv shuts off. i can still get sound but no picture. the...


Projection sets have two very common problems outlined below.

The first common problem is convergence

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. The TV can also shut down when the convergence starts to fail.

Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith, RCA and others.

You can get more information and a DIY convergenece repair kit with instructions from TV Repair Kits using the link at the end of this article.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped or bowed
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngSOLUTION

You can see some more examples and find a fix using this link on Fixya

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Nov 16, 2009 | Sony KP-53XBR45 53" Rear Projection...

1 Answer

Bush 37" lcd turns on but thats it!


Hello, its possible the TV lamp unit has played out.
If you have the tv manual, there should be information on ordering parts and the lamps etc and you will need the part # and also find out who carrys them and other items for your unit.

Jan 23, 2009 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...

1 Answer

Mitsubishi VS-45609 Blue layer is distorted and seperated


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

Convergence problems are very common on all Projection TV sets including Sony,Samsung, JVC, Philip Magnavox, Panasonic, Akai, Pioneer, Hitachi, Zenith, and others. You can get a convergenece repair kit wiith instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms
  • Screen Looks 3-D
  • Colors wont align
  • Screen may look distorted or warped
  • No Audio/Video - makes a chirping sound.
Problem #2

Another common problem is dull or washed out video.
Your TV may have one or more of the following symptoms....
  • Dull looking picture
  • White looking picture
  • Halos around objects
  • Red/Orange looking picture

You can see some more examples and find a fix here
bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Dec 30, 2008 | Toshiba 55H70 55" Rear Projection...

1 Answer

TV turns on and then, after a few seconds, picture changes to "double vision".


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 25, 2008 | RCA P46921 46" Rear Projection Television

2 Answers

Hitachi Model 53UDX10B


The problem with your set is the convergence ICs you need to replace both ICs numbers STK392-120 you can get the new ICs at the following link and they include free instalation instructions with pictures so you can do the repair yourself which takes about 45 minutes and requires basic soldering ability. Heres the link you will need two STK3920120 Convergence ICs. The manual will not help as it doesnt show the IC instalation.
http://servicemanuals.vstore.ca/

May 12, 2008 | Hitachi 53UDX10B 53" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5103 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...