Question about Singer 7444 Mechanical Sewing Machine

1 Answer

It is out of time

My mashine it is out of time

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Contributor
  • 53 Answers

When you sew through thick materials, a lot of machines have issues where the needle sticks in the fabric but all the internal parts shift and this causes the hook to needle timing to go out. The begging signs of this is skipping stitches. You will have to have you local independent sewing store do this adjustment for you

Hope that helps :)

Posted on Jun 06, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My mashine cant sew forward

I see a lot of these come in my shop. The cost of repairing outweighs the cost of a new machine. Either find a working model at a garage sale, or commit to purchasing a quality machine. The Janome Magnolia 7330 is the least expensive/best quality on the market. Baby Lock A Line Series are also good machines.

Feb 21, 2015 | Singer 3116 Simple

1 Answer

Where do i oil my mashine?

I would take it straight to a machine mechanic. Smoking could be electrical and dangerous, not something to put oil near. At the same time the tech can show you where you would put oil for future reference.

Feb 12, 2014 | Sewing Machines

1 Answer

Bernina south africa

Get your local technician to adjust needle/hook timing.

Oct 22, 2013 | Sewing Machines

1 Answer

Sewwing mashine sudenlly just turned off

if you have tried unplugging and letting it set for a few mins and plugging it back in... and still have no joy... it is likely that a short or something blew a fuse. I would take the machine in and have them do a check, clean and adjust while they did the repair.

Jan 14, 2013 | Sewing Machines

1 Answer

We have A RX-518 and the needle keeps "ticking"

I have some problem,i make mistake spending my money on this mashine.
I will by another mashine.

Oct 30, 2011 | Rex RX-518

1 Answer

How do i uses a janome Mylock 534 or mylock534D for sweing? I cant even seem to thread the thing correctly, when ever i thread the mashine it only stiches for about 3 cms. must have the needles unthreaded any time you re-thread the loopers. So thread the loopers and then thread the needles and see if you have better results.

May 06, 2010 | Janome MyLock 644D

1 Answer

My sewing mashine doent work propertly

First unplug the machine from the wall....Try cleaning the unit and oil at all the oil-points. Check that the unit is threaded properly. Check your tension of the thread, and the tension of the bobbin..Check the bobbin compartment for any thread strands. Remove the bobbin and holder and turnmachine by hand to see if the bobbin area rotates back and forth. The stitches are created with this action. If there is any debris clean it out . check the belt also ,many times the belt gets worn and slips. Hope that this helps I can only try to guess a solution, as your question is vague.

Feb 21, 2010 | Kenmore Sewing Machines

1 Answer

Thread comes out of needel and into gears

are you threading the needle from the front of the machine to the back ?? that will help as itwill not sew at all the other way , just a thought

Feb 18, 2009 | Sewing Machines

1 Answer

Switching from 110/60 to 220/50 power supply

Yes, you will need to get a transformer..try an electrical wholesaler and ask for a current converter.

May 09, 2008 | Husqvarna Lily 540 and 550

Not finding what you are looking for?
Singer 7444 Mechanical Sewing Machine Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Cindy Wells

Level 3 Expert

5160 Answers


Level 2 Expert

48 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides