Question about Linksys WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2)

1 Answer

Router needs to be reconfigured - Linksys WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Log-on to your router at either:

192.168.1.1
192.160.0.1 (some routers use this address)

Enter your admin and password names. If these were never set, chances are good you can just press enter to pass right through. You can't change router settings unless you log in.

Once you've logged in, you can then update the router's firmware and configure it to your uses.

Hope that helps!

Posted on Jun 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reconfigure a used router?


You sure can. You just need to resent the router to default settings including username/password, and reconfigure it all over.
Further instruction can be provided if you tell us the model of the router, and the type of Internet Service.

Jan 09, 2013 | Belkin Computers & Internet

1 Answer

I need to reconfigure my linksys g router. already reset and I need the next step please


What are you trying to reconfigure? You can reach the router at 192.168.1.1

http://compnetworking.about.com/od/routers/g/192_168_1_1_def.htm

Mar 05, 2010 | Linksys Wireless-G Broadband Router

2 Answers

Hi i have a lexmark all in one printer,recently i changed my router and now cant connect the printer wirelessly to the computer!


You will have to reconfigure the printer with the router and then reconfigure the PC. All routers don't have the IP address range. That might be the reason why it isnt working after changing the router. Also, if you were using the printer wirelessly, the SSID (network name) and the wireless security needs to be reconfigured to match your new router. The simplest way to achieve this would be to connect the printer hard wired to the router; uninstall the printer drivers completely from the PC; and run the setup disk again. The setup will walk you through the whole process.

Please get in touch if you need further clarifications.

regards

Sandeep

Oct 27, 2009 | Office Equipment & Supplies

1 Answer

Need to reconfigure router


If need to reconfigure router do reset first. Turn on you router then look for reset button from the back of your router press it until all lights will blink.

Aug 07, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

My linksys wrt54gp2 router needs to be


To reconfigure the router you dont need to be online. Acces the router page 192.168.1.1 and then reconfigure the same

Feb 26, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Reconfiguring rouer


If you have the setup CD you can just run it to your computer and let it reconfigure the router for you, but if you don't have the setup CD you need to manually configure the router by accessing its IP address using the computer that is wired directly to the router....

Nov 05, 2008 | NetGear WGR614 Wireless Router

1 Answer

I need to reconfigure my router


You don't need to reconfigure your router, but after restore you will need to set your wireless network again. You will find the info to do that here:

http://www.microsoft.com/athome/moredone/wirelesssetup.mspx

Oct 14, 2008 | NetGear WGR614 Wireless Router

1 Answer

WBR-1310 B1 Router


Yes after you reset the router you will need to reconfigure it back and for the ISP settings you can just call your ISP and get the needed infor,ation to reconfigure the router to work with your ISP.

Hope that helps..............

Aug 08, 2008 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Reconfigure router


I seriously can't stand those motorola routers specially since they have to reboot themselves after every change.

Unplug the power from the router, hold the reset button in and plug the power back. Keep holding the reset button for 30 seconds. That should restore it back to factory settings. Plug one machine to the router and try to access the admin console. if memory serves me correctly, the user name is admin and password is motorola.


Jun 14, 2008 | Blitzz Technology BWA711 (B3WL000900)...

Not finding what you are looking for?
Linksys WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2) Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...