Question about Miele S4210 Carina Bagged Canister Vacuum

1 Answer

Noisy vacuum that wont pick up properly

My vaccuum is about 4 years old and when using it the other night it started to make alot of noise and now won't pick up properly. I've changed the dustbag and filters but still thes same.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Your vacuum is still under warranty. Call Miele or the Miele dealer you bought it from. They are obligated to repair your vacuum.

Posted on Jun 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have vax 1800 pet vacuum. It is picking up fine but very noisy. I have replaced the belt in the past and the noise started then. On looking at it closely today I noticed brushbar was getting worn where...


spray the end of the brush-bar were the bearings are with WD-40 if that solves the problem replace the bearing when it starts screeching..

Jan 19, 2013 | Vacuums

1 Answer

I have a Dyson dc21 ... it has low suction... never happened before approx 4 years old


try completely cleaning it out and clean the filter or get a new one. sometimes when my vaccuum has low suction theres dirt clogged in the hose or the vaccuum itself. try cleaning it out and if that doesnt work try and see if the settings are messed with (if there are different settings of course)

May 23, 2011 | Vacuums

1 Answer

Don't picK up the dirt and has a noise


Have you changed the filter? What kind of noise? Unusual high pitched noise? There could be debris stuck in the hose or the secondary filter/screen could be clogged. What were you vaccuuming when this happened?

Mar 13, 2011 | Bissell Vacuums

2 Answers

Vacuum sounds like an airplane after 1 year of use.


the motor bearings are starting to fail most likely. You can diagnose the source of the noise by removing the brushroll and belt, could possibly be the brushroll bearings but if you still get the noise when the belt is off its the motor.

Jan 07, 2010 | Bissell 6594 PowerForce Bagless Upright...

2 Answers

Vacuum is about 4 years old does not pick up well


Have you ever replaced the belt? That is most likely the reason that it is not picking up like it used to. You are actually supposed to change the belt yearly. Here is the belt you need and the manual which has instructions:

Dyson DC07 Belts and Manual

Dec 31, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Vaccuum forms in hose- will not pick up dirt


Check your wand for a clog. The DC17 line has common clog issues in its wand. It may be difficult to remove but if you have a long skinny pole(like one for curtains) you can use that to remove the clog.

Dec 05, 2008 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

My Bisell Revolutionary Lift off vaccuum has a high consistent noise. I have changed and cleaned all filters, but the problem still exists. The vaccuum is approximately 1 - 1 1/2 years old.


Did you check the hose and the dirt inlet by the brush roll for a partial blockage? If no blockage, then it may be coming from the main motor, replacing it is the only way to fix it if it is coming from the motor. Also, some people can hear these higher frequencies, and most can't, so if this is what it is, there may be no fix for it other then a different vacuum.

Apr 24, 2008 | Vacuums

1 Answer

Wont pick up dirt


Is the brush roll turning, if not then replace the belt. You may have a clog in the hose or in the dirt inlet down by the brush roll.

Apr 14, 2008 | Kenmore 34721 Upright Vacuum

2 Answers

Hoover floormate plus model #H3010


It seems to be a common problem with this series of floormate... some home quickfixes (a hassle, i kno) but put downward pressure while using the solution.... Check your warranty that came with it, and how long you purchased the floormate... Alot of vaccuums come with 30-90 warranties, I'd recommend having it checked out. That, or if u bought it recent enough,take it back... like i said, these models are unfortunately known to have this problem... Some people have ones that operate normally, but alot do not. >.<

Jan 09, 2008 | Hoover H3030 FloorMate SpinScrub 500...

Not finding what you are looking for?
Miele S4210 Carina Bagged Canister Vacuum Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Mack Baxter

Level 3 Expert

381 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Miele Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...