Question about Kitchen Ranges

1 Answer

Fisher and paykel smart drive 703 top loader, lights go on but pressing them even to start does nothing at all?? i brought this 4 days ago from a good friend and it worked perfect even for the first 2 big loads i did straight away. i do know i was driving a little rough with it in the wagon on its side but only one noticeable bang please help??

Posted by on

  • 1 more comment 
  • sarah jones Jun 05, 2010

    ok ill get back to you in 5 bout that its sounding pretty right so far

  • sarah jones Jun 05, 2010

    ok pulled the thing off the control panel there is a green box on both the inside and one still on the back of lid i just pulled off where do i find the codes and if a tech sheet is a bit of paper um theres not one there just box with coloured cords neatly running randomly out here and there ??

  • sarah jones Jun 05, 2010

    ok pulled the thing off the control panel there is a green box on both the inside and one still on the back of lid i just pulled off where do i find the codes and if a tech sheet is a bit of paper um theres not one there just box with coloured cords neatly running randomly out here and there ??

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 516 Answers

If you remove the control panel you will find a tech sheet that will tell you the codes. if there is any lights flashing, it is a fault code. there is a chance that the board has malfunctioned or that the teeth that seat the tub to the motor are bad. it can also be a pump problem. the first thing to do it see what the code is and what its for. then i can assist you more. have a look at this and let me know what you find. remove the two sometimes three screws behind the control panel and lift forward.

Posted on Jun 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My fisher paykel top loader smart drive 053 has started to sqeak when spinning


drive belt may be loose and squealing just like a car will suggest re placeing it at that age.

Jul 09, 2012 | Washing Machines

1 Answer

Hello where can I find the error codes for a fisher and paykel smart drive 703? It stops usually during s pins cycle (well it looks like it's trying to spins and it won't start).so it stops and...


Hi - what would youlike to know - we are forbidden by contractual & copyright laws to provide what you seek..

Besides you are lucky if parts for the 703 is still in existence - only savvy techs could salvage those as you have to modify wiring & components for it to work. I have only done this once in the Pacific islands some years ago.

Jun 24, 2011 | Fisher and Paykel (IWL12)

1 Answer

Fisher Paykel washing machine Smartdrive 703 Advance, Power and Start buttons are non responsive when pushed. Is there a part that can fix this. Does the control panel have to be replaced?


Fisher & Paykel Smart Drive beeps and stops during rinse cycle. If I hit pause and wait and restart it eventually continues. It seems like it has problems detecting water level.

Apr 13, 2011 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher and paykel smart drive 703 top loader, lights go on but pressing them even to start does nothing not start or let me change the size of the load ;(


Hi, just read your posting.Now the possible fault could be your display board.When you turn the power on to the machine from the power point do all the lights come on and you hear an audio beep beep , then the lights go out ?If that happens, then do you push start and can not select anything else like water temp or load size?Or do a series of lights light up and it beeps indicating a fault code after you have pushed the power button? Please reply and I can guide you throe step by step the process needed to fix this problem.

Jun 05, 2010 | Washing Machines

1 Answer

Fisher & paykel GW 703-U water flow and the engine sounded choked


sounds like out of balance switch is faulty. does the water start stop start stop then machine beeps. if it does it is most likely out of balance switch.please reply 4 more help

Mar 12, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Our Fisher and Paykel 603 smart drive has stopped


most likely your problem is your lid switch visit your local spare parts dealer and purchase a new one

Feb 06, 2010 | Fisher Washing Machines

1 Answer

Washing machine


motor is starting to wear out ,replace it .

Oct 01, 2007 | Fisher and Paykel GWL11 Top Load Washer

2 Answers

Smart Drive 703-strange noise during wash cycle


hi there these washing machines don't have any pelts or pulley's. Washer will need new seals and bearings witch is a big job, you wont be able to do it your self as you need special tools to put the bearings back in :)

Aug 22, 2007 | Fisher and Paykel GWL11 Top Load Washer

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Paul Carew

Level 3 Expert

2550 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...