Question about E-Machines eMachines Desktop PC

2 Answers

Emachine will not turn back on

Emachine did not reboot

Posted by on

  • 2 more comments 
  • Anonymous Apr 09, 2008

    Same thing. Monitor works, CPU will not turn on. I've looked for a reset button to stick an inkpen tip to reset, but can't find anything.


  • Roswan1 Apr 28, 2008

    Pc wont come on. Before this happened the mouse was not working right.

    Bought a new mouse. Pc wont even come on. I have the right mouse.

  • craigh2102 Nov 07, 2008

    I replaced the power supply with a Raidmax 380w from Fry's. The power switch seems to not be working. I get no response from it!

  • Anonymous Jan 21, 2009

    I have a E-machine W3107 ,the system is not booting up, i changed the psu, and only the cpu and system fan come on, can anyone say what could be the problem, is it the ram or hdd?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 172 Answers

Motherboard blown contact me for further support

Posted on Nov 15, 2008

  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 2 Answers

Check the power supply.seems to be a comman problem.
e-bay is a good place to look for reasonably priced ones.

Posted on Apr 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Emachine T5234 beeps 5 times and won't turn on


5 Short BeepsYour motherboard is complaining. Try reseating the memory and rebooting. If that doesn't help, you should consider another motherboard. You could probably get away with just replacing the CPU, but that's not too cost-effective. Its just time to upgrade!

Aug 15, 2012 | E-Machines eMachines Desktop PC

1 Answer

How do i restore a emachines e4212 to factory settings without restore disk?


go to start/all programs/accessories/system tools/ system restore...restore to an earlier date click next...pick a date 2 to 3 mos back when your system was working just fine...click ok..systems is to reboot now..yes (your system will shut down and reboot and prompt you are you sure you want this to happen click yes....system is restore no disk
feel free to rate the help

Jun 29, 2010 | E-Machines eMachines Desktop PC

1 Answer

I have an emachine t5022 that stalls and has to be rebooted every now and then (new problem) and now it simply turns itself off for no reason (once in a while) then comes back up as if I just turned it on.


You have a problem with a program that is running in the background it takes all the power and freezes the pc.
If it wants more than the pc can give it it will crash it and the pc will automatically restart.
Open Task Manager and keep an eye on the Processes - the one that will top 99% is the culprit so uninstall it.

Jun 23, 2010 | E-Machines eMachines Desktop PC

1 Answer

My emachine desktop t3312 won't start up. I get to the screen to start windows normally and choose it along with any other option and then it tries to reboot and ends up back at that same screen. Help


have u been trying to overclock your system? might have to reset cmos . powwer down your pc, open it up and find the 3 pin connector usualy next to the battery but check in your manual remove the plasic tab from the 2 pins and place it on the 2 pins ajacent to it wait 10 secs then place back where you found it. close your pc and reboot.

Feb 10, 2010 | E-Machines eMachines Desktop PC

1 Answer

I have a emachine T3410 I tryed the recovery disk an the computer will not reboot back up. chuckwjack


what kind of message is this thing giving you? does it show the BIOS when you turn it on or just a black screen?

Oct 10, 2009 | E-Machines eMachines Desktop PC

2 Answers

Emachines w2828 keeps shutting down reboot/Screen Freeze


I dont thing this is a virus problem but a heat problem. if you dont mind getting inside the box see how clean it is and put your hand on the power box case .. then unplug all the hardware except the mother board then turn the unit on, if it goes on then plug 1 hardware at a time.

Sep 04, 2009 | E-Machines eMachines Desktop PC

1 Answer

Emachine restore back to factory settings


Just remove the battery for about five minutes and re insert.All you have to do after you reboot is reset the time and date.

Sep 19, 2008 | PC Desktops

1 Answer

EMachine T1440 will no boot on


There is a battery inside the pc, remove it and replace it with a new one. Leaving it unplugged for that long taxes the battery too much. This should help and also plug everything in and reset the power switch on the back.

Aug 19, 2008 | E-Machines eMachines Desktop PC

1 Answer

E-Machine T2984 the power light is flashing.


There something problem in your PSU, you need to check the power supply of your system, if hard for you then you can let repairman do it, or replace that with a new one.

Jan 21, 2008 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an E-Machines PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...