Question about Panasonic 50 in. Plasma TV

2 Answers

Panasonic TH-50PZ Plasma TV won't come on.

My Panasonic TH-50PZ Plasma TV turns off and flashes the red light several times and stops. We can't get it to come on.

Posted by on

  • 5 more comments 
  • Attacus Jun 18, 2008

    I have exactly the same issue. If I unplug\replug the TV I can get it to turn on for a 3-5 seconds, then it just turns off and starts blinking the power light.

  • Anonymous Jul 13, 2008

    I tried to turn my television on this morning, and all that happens is that the red power light starts blinking. I unplugged it for several minutes, but when plugged back in it still blinks.

  • john h Oct 05, 2008

    whats a UPS i have the same prob??

  • prideconcret Feb 18, 2009

    my tv went out, we unplug it for a few min. and tried again. the little red light in front would only just blink, no picture. my tv is a 50in plasma that i only saw one super bowl and that was in 2008. i miss 2009.

  • richardpark1 Mar 15, 2009

    I was watch a movie last night on a panasonic 46" plasma, next thing it just turned off. Now if I switch it on the grenn light blinks a few times then turns to red blinkingĀ 

  • Anonymous Mar 12, 2014

    A recent thunderstorm caused? the loss of several digital channels received through antenna. The tv was turned off at the time, but on turning it on, only PBS channels remain.

  • Anonymous Mar 21, 2014

    The power went on & off a couple of times. The tv shut down & won't turn back on

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

What is a UPS?? mines doing it too

Posted on Oct 05, 2008

I had the same issue twice with a TH 42PWD5. turns out it was my UPS that was killing the switching power supply. Warranty covered it but when I removed the UPS not a single issue in 3 years. 

Posted on Jul 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a panasonic tv CT-34wx54j red light 5 blinks


The power supply probably has failed. The clicks indicate it is trying to start up but can't.

Dec 30, 2013 | Panasonic Viera TH-50PZ85U Plasma TV

1 Answer

PANASONIC VIERA TH-42PZ82BA 42" PLASMA TELEVISION 1080P Full HD


Your TV is showing symptoms of power supply failure. It needs to be repaired or replaced. The remote has nothing to do with the power supply problem

Mar 21, 2013 | Panasonic Viera TH-42PZ85U 42 in. Plasma...

1 Answer

Panasonic viera Plasma TV model TH-P42X10A The tv


Hello,

The power supply board of the television is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

I hope this will help in solving the problem....

Aug 01, 2011 | Panasonic Flat Panel Televisions

1 Answer

When the Panasonic TH-50PX60U is turned on, the button beside the power switch flashes 10 times, stops and repeats the flashing. The tv will not actually turn on.


Hi,
10 times red light blinking shows problem with PA board and/or H board, both boards are available in shopjimmy.com for $35 and $45
Replace required board to solve this issue.
Hope this info will help you.
Thanks.

Jan 21, 2011 | Panasonic TH-50PX60U 50 in. Plasma HDTV

3 Answers

TH-42PZ80U Panasonic Plasma, red light flashes 10 times


Panasonic said "A" board,
A board SOS Detect (Explanation)
10 Blinks SOS: The voltage regulators IC5400 and IC5401 in the A board generate SUB9V and SUB5V. The 9V and 5V from these ICs are monitored by IC1100. Any abnormality on the SUB9V or SUB5V lines, triggers the shutdown circuit and the MPU shuts down the unit. The power LED blinks 10 times.

But need to measure the connection SC2, if it short, it will be the SC board.

The knowledge obtain from: Real case of repair by myself.
Information from Panasonic training manual.

Apr 27, 2010 | Panasonic Viera TH-42PX80U Plasma TV

1 Answer

Red led flashes. when i try to turn tv on it shuts off immediately. it's a panasonic th-42pz700a


There should be a number of flashes that you can count. This is an error code. It will flash a number of times and stop. Again, Flash a number of times and stop. Contact a repair shop that is familiar with panasonic and have them to check it out.

Oct 14, 2009 | Panasonic TH-42PZ700U 42 in. Plasma...

2 Answers

Panasonic th-42pa20 plasma 42 inch tv


Try to replace the Main Power Supply board first.

Dec 29, 2007 | Panasonic TH-42PA20U/P 42 in. Plasma EDTV

Not finding what you are looking for?
Panasonic 50 in. Plasma TV Logo

Related Topics:

1,668 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68368 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

charlie rodriguez
charlie rodriguez

Level 2 Expert

151 Answers

Are you a Panasonic Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...