Question about Moen Monticello Collection 1 handle Shower Faucet

1 Answer

Hot side is cold cold side is hot

How can i correct?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 151 Answers

Hello, this can happen if the shower body unit was installed incorrectly, the installer connected the hot to the cold side and cold to the hot side, what you can do might be a bit difficult but the water supply lines are reversed you need to open up the wall and attach the cold and hot lines to the right sides.. hope this helps

Posted on Jun 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I INSTALL THE CORRECTION TAPE? CAN'T GET IT TO CORRECT TYPING.


Theres a manual here that should tell you everything you need to know.

Dec 05, 2014 | IBM Correcting Selectric III Electric...

1 Answer

Engine diagrams


There should be two tanks under the hood on the passenger side, one should be marked engine coolant, the other washer fluid. Do NOT confuse one for the other. On the side of the ENGINE COOLANT tank there are marks, The lowest one(cold) or highest one (hot) you can check the coolant either cold or hot, fill to the correct line depending on whether the engine is cold( not running for several hours) or hot( you just got done driving it.)

Jul 18, 2014 | Chrysler Town & Country Cars & Trucks

1 Answer

CORRECTION RIBBON


The correction ribbon is installed on a separate mechanism on a typewriter. If you look between the regular ribbon guide and the card holder you should see the correction ribbon guides on the right and left hand side of the card holder. the spool holders will be to the right and left of the correct ribbon guides. This is true only if the typewriter has a correction mechanism installed. Some machines do not have a correction mechanism. Correction is achieved by using a correction tab which is held by hand, in front of the letter to be removed, or white out. Some correction tapes attach to the bottom of the print ribbon.

Nov 06, 2013 | Swintec Office Equipment & Supplies

2 Answers

96 dodge grand caravan... blows cold on passenger side when heater on, as well controls reversed. cold is hot nad hot is cold


SOMEHOW I BELIEVE YOUR TWO INTAKE & RETURN HEATER HOSES THAT FEED THE HEATER CORE HAVE BEEN REVERSED. EITHER THAT OR a plugged heater core

Feb 10, 2013 | 1996 Dodge Grand Caravan

1 Answer

2005 chevrolet avalanche driver's side ac blowing hot passenger side cold


i have the same problem the acuator under the dash on the right side of the transmission hump controls the left side temp just disconnect it and it will stay on ac and in the winter plug it up put it on heat and disconnect it and it will save u alot of money and time

Jul 06, 2012 | 2005 Chevrolet Avalanche

1 Answer

I have a gx6750 correcting typewriter. The problem is, the correcting part of it does not work. I am wondering if the correctable ribbon indicates "correctable" on the cartridge or not. I am...


A correctable ribbon should be correctable. Is the ribbon being lifted up high enough to correct?
Is there any letters on the correction ribbon and is the ribbon installed correctly? Old ribbons lose their tackiness over time, try advancing the ribbon by hand to get to fresher ribbon.

Jul 08, 2011 | Brother Office Equipment & Supplies

1 Answer

L have a moen kingsley t125 with a moen 9000 m pact the cold water handle comes out with a trickle only when you turn it on the hot water is find unit is about one year old


You have a obstruction in cold side turn off both cold and hot water to faucet then disassemble cold side(take note of how you take apart it must go back correctly) slowly open cold water stop to see if you can dislodge obstruction(use a towel over cold water handle assembly to keep from water shooting everywhere).

May 30, 2011 | Moen Kingsley Two Handle Bathroom Sink...

Not finding what you are looking for?
Moen Monticello Collection 1 handle Shower Faucet Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Moen Plumbing Experts

john h

Level 3 Expert

12650 Answers

Donni Steen

Level 3 Expert

659 Answers

Don Numinen
Don Numinen

Level 2 Expert

62 Answers

Are you a Moen Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...