Question about Audiovox PVS72901 Portable DVD Player
If you remove the 4 screws to the top of the RBN-300 battery holder, then separate the halves, you will see a small IC board charge controller in the top 1/2. Remove the 3 screws to it, gently remove the board & (with a magnifier) look at the contact to the side of the board from the power plug (close to the LED light.
If you wiggle the low volt power plug, I expect you will see that the solder joint has broken on the board edge. Resolder & reassemble -I use hot melt glue to help support the plug to avoid re-breakage between plug & board.
This may fix your problem unless the erratic circuit connection has killed either the control board or you battery.
Posted on Nov 05, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 19, 2015 | HiTi Digital Hiti CS-200e Single Sided...
Jan 08, 2011 | Audiovox ENERGIZER WALL CHARGERMOST SONY...
May 20, 2010 | Audiovox PPC 6700
Jun 08, 2009 | Audiovox PVS33116 Player
Apr 23, 2009 | Audiovox 2-Way 14 channel FRS Family Radio...
Aug 03, 2008 | Energizer Rechargable Battery with Charger
1,827 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: