Question about Husqvarna Ariens 46 In Deck 20 HP Kohler Engine Hydrostatic Tractor includes "Free B

1 Answer

Oil filter i can not get the oil filter off

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 146 Answers

Best method is to get a set of channel-lock pliers that open wide enough to grab the filter. They look like this:
oil filter - ac6a680.jpg
Cheap and dirty method: use a hammer to bang a screwdriver blade into the filter from one side, near the end, then use that to turn it.
When installing the new filter, put oil around the rubber seal, spin it on until it starts to tighten up, then turn it one-half turn by hand. No wrenches. Fill the oil up, start the engine and make sure the new filter doesn't leak. Good luck! Please rate this if you found it helpful, thanks!

Posted on Jun 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil filter


To change your oil filter, remove oil drain plug, drain oil into an oil pan, clean and replace oil drain plug, then remove oil filter, pour a drop of clean oil onto a new oil filter, and lube gasket, then replace the old oil filter with the new oil filter. Finally, add clean oil to the motorcycle until the oil level window shows oil in the middle of the viewing window when the bike is upright.

Nov 10, 2008 | 2002 Yamaha XJR 1300 SP

1 Answer

Oil filter


To change your oil filter, remove oil drain plug, drain oil into an oil pan, clean and replace oil drain plug, then remove oil filter, pour a drop of clean oil onto a new oil filter, and lube gasket, then replace the old oil filter with the new oil filter. Finally, add clean oil to the motorcycle until the oil level window shows oil in the middle of the viewing window when the bike is upright.

Nov 10, 2008 | 2004 Vertemati SR600

1 Answer

Oil filter


To change your oil filter remove oil drain plug drain oil into an oil pan clean and replace oil drain plug, then remove oil filter, pour a drop of clean oil onto a new oil filter, and lube gasket, then replace the old oil filter with the new oil filter. Finally, add clean oil to the motorcycle until the oil level window shows oil in the middle of the viewing window when the bike is upright. ,,,

Nov 10, 2008 | 2001 Sachs Roadster 800

1 Answer

Oil filter


To change your oil filter remove oil drain plug drain oil into an oil pan clean and replace oil drain plug, then remove oil filter, pour a drop of clean oil onto a new oil filter, and lube gasket, then replace the old oil filter with the new oil filter. Finally, add clean oil to the motorcycle until the oil level window shows oil in the middle of the viewing window when the bike is upright. ,,,

Nov 10, 2008 | 2008 Qlink XF 200

1 Answer

Oil filter


To change your oil filter remove oil drain plug drain oil into an oil pan clean and replace oil drain plug, then remove oil filter, pour a drop of clean oil onto a new oil filter, and lube gasket, then replace the old oil filter with the new oil filter. Finally, add clean oil to the motorcycle until the oil level window shows oil in the middle of the viewing window when the bike is upright. ,,,

Nov 10, 2008 | 2005 Qianjiang QJ150-B

1 Answer

Oil filter


To change your oil filter remove oil drain plug drain oil into an oil pan clean and replace oil drain plug, then remove oil filter, pour a drop of clean oil onto a new oil filter, and lube gasket, then replace the old oil filter with the new oil filter. Finally, add clean oil to the motorcycle until the oil level window shows oil in the middle of the viewing window when the bike is upright. ,,,

Nov 10, 2008 | 2005 Qianjiang QJ125T-12C

1 Answer

Oil filter


To change your oil filter remove oil drain plug drain oil into an oil pan clean and replace oil drain plug, then remove oil filter, pour a drop of clean oil onto a new oil filter, and lube gasket, then replace the old oil filter with the new oil filter. Finally, add clean oil to the motorcycle until the oil level window shows oil in the middle of the viewing window when the bike is upright. ,,,

Nov 10, 2008 | 2005 Qianjiang QJ125

1 Answer

Oil filter


To change your oil filter remove oil drain plug drain oil into an oil pan clean and replace oil drain plug, then remove oil filter, pour a drop of clean oil onto a new oil filter, and lube gasket, then replace the old oil filter with the new oil filter. Finally, add clean oil to the motorcycle until the oil level window shows oil in the middle of the viewing window when the bike is upright. ,,,

Nov 10, 2008 | 2004 Petronas FP1

1 Answer

Oil filter


To change your oil filter remove oil drain plug drain oil into an oil pan clean and replace oil drain plug, then remove oil filter, pour a drop of clean oil onto a new oil filter, and lube gasket, then replace the old oil filter with the new oil filter. Finally, add clean oil to the motorcycle until the oil level window shows oil in the middle of the viewing window when the bike is upright. ,,,

Nov 10, 2008 | 2006 Maico 320 Supermoto

1 Answer

Oil filter


To change your oil filter remove oil drain plug drain oil into an oil pan clean and replace oil drain plug, then remove oil filter, pour a drop of clean oil onto a new oil filter, and lube gasket, then replace the old oil filter with the new oil filter. Finally, add clean oil to the motorcycle until the oil level window shows oil in the middle of the viewing window when the bike is upright. ,,,

Nov 10, 2008 | 2004 Kymco Venox 250

Not finding what you are looking for?
Husqvarna Ariens 46 In Deck 20 HP Kohler Engine Hydrostatic Tractor includes "Free B Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

608 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...