Question about Computers & Internet

1 Answer

I have an old Brandt D-1000 edgebander that needs a rebuilt or new glue pot. Been told a new one costs 3600.00. Can anyone find me a better price or a rebuilt one?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 776 Answers

Hi, I can tell you one thing that the deal you have is one of the best, considered the price of the new one. However just sending a link that might help you: http://www.westcoastmachinery.com/WCMACHINERY/myinventory.asp?mc=32&P=38895&S=178&PubID=4777 BRANDT - D-1000 EDGE BANDER 1985 List Price: $1,500.00 Condition: AS IS Machine Stock Number: 4069L Member Stock Number: EB110000033 Serial Number: 086 Description: BRANDT Model D-1000 EdgeBander ? 1985 model great donor unit for parts. Call for details ? Glue pot is good ? All motors are 230 Volt, 3 Phase ? Feed Speed 23 FPM ? Edgeband height 7/16" to 1-13/16" ? Minimum panel length 9" ? Maximum panel thickness 1-5/8" ? Band thickness up 1/16" / 1/32" on coil Other one: Scroll down the page fro your product details: BRANDT - D-1000 EDGE BANDER 1985 List Price: $1,500.00 Condition: AS IS Machine Stock Number: 4069L Member Stock Number: EB110000033 Serial Number: 086 http://www.overlandtool.com/OVERLANDTOOL/myinventory.asp?mc=18&P=36340&S=174&PubID=4773 Check the above one, or you should be good to go with the one you have seen.

Posted on Jun 04, 2010

  • Dushyant Bist
    Dushyant Bist Jun 04, 2010

    Hi, I can tell you one thing that the deal you have is one of the best, considered the price of the new one.
    However just sending a link that might help you:
    http://www.westcoastmachinery.com/WCMACH...


    BRANDT - D-1000 EDGE BANDER 1985 List Price: $1,500.00 Condition: AS IS Machine Stock Number: 4069L Member Stock Number: EB110000033 Serial Number: 086 Description: BRANDT Model D-1000 EdgeBander ? 1985 model great donor unit for parts. Call for details ? Glue pot is good ? All motors are 230 Volt, 3 Phase ? Feed Speed 23 FPM ? Edgeband height 7/16" to 1-13/16" ? Minimum panel length 9" ? Maximum panel thickness 1-5/8" ? Band thickness up 1/16" / 1/32" on coil Other one: Scroll down the page fro your product details: BRANDT - D-1000 EDGE BANDER 1985 List Price: $1,500.00 Condition: AS IS Machine Stock Number: 4069L Member Stock Number: EB110000033 Serial Number: 086

    http://www.overlandtool.com/OVERLANDTOOL...
    Check the above one, or you should be good to go with the one you have seen.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Where can I get a manual for a Glory Brandt 8672 currency counter?


Let me set the record straight. Brandt invented the 8672, one of the best machines of all time. Unfortunately it was way over priced. Brandt was in business for over 110 years and then sold out to the employees of the company who then sold out to the DeLaRue company in England. DeLaRue then sold out to Talaris. And, finally, Talaris sold out to Glory two years ago. However, the 8672 stopped production before Glory became the owner. All the above took place over 15 year period. Got all that!!
Now back to your question. What kind of manual do you need? I would need to know the full model and serial number for the correct manual.
If your counter say Brandt on it, that is very old. The newest version has the name Talaris on it. Spare parts can be had, but are very rare and somewhat expensive since the machine is no longer made. Here is a picture of a 8672. Good luck.....
25555021-mse4rmslvyyhbolmu1acj0p1-4-0.jpg

Mar 11, 2015 | Brandt 8672 Note Counter

1 Answer

Wires to license plate light are damage in my 2002 volvo s40


where did you go and that price. plate light socket is 3 .00 dollars

Dec 06, 2012 | 2002 Volvo S40

1 Answer

Brandt WFK1458FE ERROR CODE F08


go to http://www.brandt.com/ and get the support via ONLINE via chat or phone.

God bless you

Sep 25, 2012 | Washing Machines

1 Answer

Brandt edgebander inverter error?


need much more detail to answer...machine model, year and the code it's throwing.

Sep 13, 2012 | Washing Machines

1 Answer

Colt ecu change


The ECU would have to match the part number EXACTLY. You're much better off getting your current ECU rebuilt and programmed by the rebuilder.

Aug 26, 2017 | 2006 Mitsubishi Colt

2 Answers

I need a new Master Cylinder for my brakes for my 1987 Nissan pickup. do I have to buy the specific or will a different model work. also which one will work.


You have option of different brands from different vendors NAPA, dealer or auto parts stores but they will have same basic master cylinder. They have to look part up by application. Shop around for best price and warranty.

Jan 07, 2011 | 1987 Nissan Pickup

3 Answers

How much is a new or used engine going to cost ? 1.6 liter V-tech engine for an Honda Civic 1997 ?


$1000 for good used low milage engine. Anywhere for $3000-$4000 ffor a new one, at least. Jasper's have remanufactured motors, 3 year/30,000 miles, at bit less than new.

May 05, 2010 | 1997 Honda Civic

1 Answer

Casablanca Vary Quiet PC Board for Series 4000


First, the resistor you are looking for is a 39K ohm +/- 5% tolerance (GOLD tolerance band). Second, FAN MAN still has a couple of new boards in stock, even though his website says he is sold out (I just spoke with him today). VERY nice guy, and VERY reasonable prices. Phone # is (866) 600-FANS (3267). I had the same problem a few years ago (burnt resistor and fried pot) and replaced the resistor and pot. Everything worked again with very little time to fix, and almost no cost. Got the resistor at Radio Shack, but had to order the pot from a Casablanca dealer - read on.......

Now for the pot......

Part #1954150 *IS* a 5K ohm linear taper. I'm looking at the meter and a new pot as I write this. You had me wondering if I misread the meter or something, so I went back and double/triple checked. This pot is installed in my recently rebuilt Vari-Quiet Victorian, and it works fine.

However, I want to tell everyone that I had purchased a replacement pot many years ago from a Casablanca dealer because, as I said above, my old one had fried, along with the resistor (just like your situation). The pot the dealer sent me was a Casablanca part 0001040 (I still have the receipt), and it fit perfectly, so I didn't pay much attention to it. This pot worked for over a decade. But the replacement pot was NOT stamped with the 1954150 part number, and I have long ago thrown out the original - so I don't know at this point what was originally in the fan. BUT, the replacement pot that I put in so many years ago *IS STAMPED* "25K Ohm", and I measured what is left of it and it definitely is a 25K ohm linear taper pot. It worked for over a decade (since 1998).

Now, I have once again rebuilt my fan this summer because the pot again failed (I can't complain, I got almost 11 years out of it). New bearings, new pot, new flywheel, new PCB assembly, new heat sink/transistor, new brass hardware and a a coat of paint/laquer (brass). The new pot was purchased from Plaza Lighting (978) 774-7801, Don Guerette - another VERY nice guy with EXCELLENT prices. However, I got his last pot - sorry. The pot Don sent me is the 1954150/5K Ohm linear taper - the same one that came out of your Vari-Quiet. It also works very well - better than my old 25K Ohm pot because it slows the fan to a full stop at almost a full deflection of the knob (my old 25K ohm slowed the fan to a full stop at partial deflection).

Hence, my conclusion is that the part that belongs in MY fan is the 1954150 pot, and the 25K Ohm pot was the wrong one, even though it worked for many years (no reason it wouldn't, scaling was off, that's all). If you've never done anything with your fan since new (like replace the pot), then the correct pot is the 1954150 since that is what you are taking out of it, and that is definitely a 5K ohm linear taper. You can pick these up almost anywhere. The 25K ohm wa a wire wound. I don't know about the 5K ohm as I'm not about to take mine apart - smiles.

P.S. I was able to acquire a W52 remote control module and install it on my rebuilt Vari-Quiet. It works GREAT (Casablanca sasys you must convert it to a 3-speed before you can use the W52 - LOL)!!!!!

Sep 11, 2009 | Dryers

1 Answer

Need plastic handle on Rival Crockpot lid.


J'aie un crok pot Bravetti de 7 pintes, c'est une petite merveille jusqu'à aujourd'hui car une de mes poignées s'est cassée lors de son utilisation. Je ne l'aie pas cognée, j'aie seulement pris mon crock pot ( qui était en pleine cuisson depuis 4 h00) par les deux poignées pour le changer de place sur mon comptoir de cuisine et crack, la poignée m'est resté dans les mains. Je n'ose pas imaginer ce qui aurait put arriver si il y avait eue un enfant près de moi lors du déplacement de mon crock pot Bravetti 7 pintes en inox. J'aurrais pu brulé quelqu'un pour le reste de sa vie....ATTENTION lors du déplacement de votre crock pot car les poignées ne sont pas solide du tout, je suis vraiment décue car j'adorais utiliser mon crock pot mais à partir de maintenant.....je vais y penser à deux fois avant de m'en procurer un autre Bravetti 7 pintes en inox.
Lyne
Abitibi

Aug 10, 2008 | Crock Pots & Slow Cookers

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...