Question about HP Office Equipment & Supplies

1 Answer

I have a HP color laserjet 2840 all in one. I keep receiving an error message of 50.1 Fusion error turn off and on. I have done this and it still will not print. What do I do?

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 4,737 Answers

If i am right, you are telling about "Fuser Error" "code 50.1". This means your fuser temperature is "low". To fix this, we need to follow the steps below;
Please turn off the printer and leave it for about 20 minutes. Remove the fuser, leave it outside for several minutes and check if you can see any physical damage. Reconnect/reinstall them If you see no changes after this, your best bet is to replace the fuser. This will definitely fix your problem, if in case replacing the fuser doesn't fix, I would suggest to call a technician, since it is to be done on the board and on the power supply unit.
Hope this helps, Good luck. Thanks for using FixYa.

Posted on Jun 04, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
acdr
  • 1913 Answers

SOURCE: ''Page too complex'' message on HP color laserjet 2840 Multifunct.

go to printer and faxex then enable advanced features in your printer po\roperteis.

Posted on Nov 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed an original Q3971A toner into the HP 2840 laser printer, However there is still a notice to install cyan catridge. Can you help please


PDF]HP Color LaserJet 2840 and 2820 All-in-One for small and ...

h10010.www1.hp.com/wwpc/.../clj2820_clj2840_bro.p...

Hewlett?PackardColour laser printing. HP Color LaserJet ... •Convert hardcopy documents into digital format for easy ... Color LaserJet 2820 All-in-One gives you high quality, ... Oth ring. Why HP. Save time. Printing a file. Printing a paper fax. Receiving a .... Install, configure and manage multiple networked ... Replace toner cartridges easily.

HP Environment: Product Safety Information - LaserJet ...


Dec 18, 2015 | HP LaserJet 2840 All-In-One Printer

2 Answers

HP Color LaserJet 2840 keeps showing 50.2 Fuser error message. Nothing helps correct problem. What to do? Have tried repeatedly turning printer off, waiting several seconds and turning on again. Each time...


The fuser is the heating unit near the paper exit, and that error means the lamp is burned out, the overtemp sensor is out, or the thermistor in the fuser is bad. About all you can do is replace the fuser. www.precisionroller.com will have a new fuser for you.

Jan 12, 2010 | HP LaserJet 2840 All-In-One Printer

1 Answer

HP 2840 *(Error Message) = replace supply using black only Will only print in black All color and black toner are 75% or more full The drum was low so I replaced it just in case but error message remains.


By repalce supplies, it means that you have to replace the other toner cartridges and that it is only going to print black only

Al
Eliteprintersolutions@gmail.com

Apr 14, 2009 | HP LaserJet 2840 Printer

2 Answers

52 scanner error on HP Color Laserjet 2840


The device has experienced an internal hardware error. Recommended Action
  1. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
  2. If the error is still unresolved, contact Hewlett-Packard for technical support to troubleshoot the problem. Call HP for telephone support

Mar 22, 2009 | HP LaserJet 2840 All-In-One Printer

1 Answer

For my hp color laserjet 2840


You have a bad scanner assembly. Very expensive to get fixed

Mar 02, 2009 | Office Equipment & Supplies

1 Answer

Hp color laserjet 2840 locks up at startup


Remove all toner carts
remove network card
remove memory
Turn off

Turn on...wait for error messages to stop.
Turn off

Reinstall items
Turn on

Jan 30, 2009 | HP LaserJet 2820 Printer

1 Answer

My HP Color Laserjet 2840 and is saying "50.1 Fuser Error"


HP error message 50.X is usually a fuser error. replace fuser

Jan 13, 2009 | HP LaserJet 2840 All-In-One Printer

1 Answer

Scanner error 6 for hp color laserjet 2840


After the hp color laserjet has finnished initiallizing it gives me error code 6

Dec 07, 2008 | HP LaserJet 3050 All-In-One Printer

1 Answer

HP color jet 2840 cartridge not recognize


Turn the printer off and turn it back on again and see if happens now.

Jul 12, 2008 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Ben Johnson

Level 3 Expert

685 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...