Question about 2wire (1000-000005-002) 802.11g/b Wireless Adapter

1 Answer

I had ATT DSL w/ a linksys wireless router. I was

I had AT&T DSL modem w/ a linksys wireless router. I was able to print from my laptop though print sharing on my pc which was USB hard wire connected to the printer.
Since I switched to U-verse (2wire all-in-one modem/router), I cannot access the pc printer from my laptop wirelessly as before. Is there a setting in the 2wire that needs to be changed.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 39 Answers

So, both computers are on the lan segment of 2wire? How many lan ports on 2 wire? Can you do ipconfig from the command line on both computers to see what the addresses are? In most cases, the first 3 octets xxx.yyy.zzz.### should be the same. If not, then 2wire is configured for vlan and the computers are actually on different lan segments & cannot communicate with each other.
Another thing you can do to troubleshoot is to ping each other's address.
You have to first establish there is communication between the 2 systems before troubleshooting further. Otherwise, you could be wasting a lot of time.

Posted on Jun 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I connect to my computer with AT & T DSL connection? I only see one ethernet port on back of computer tower.


If you just bought the router, you will need to insert the router between your computer and your ATT DSL Modem. The cable from the wall goes into the modem (should already be that way) then the Ethernet cable from the modem should now go to the source of your Linksys Router. then use one of the ethernet ports from your router into the ethernet port on the back of your computer tower.

Use the documentation that came with the Linksys for more information on setting it up.

Good Luck

May 11, 2011 | Linksys Wireless-G WRT54GS Router...

1 Answer

Cannot connect to att DSL through Linksys router.


hi
I've tried:
Having the router get an IP automatically from the modem.
Changing the router's IP address.
Having the modem pass PPPoE authentication to the router.
Bridging the modem.
Power cycling the guts out of everything.

Jul 02, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

After changing our att dsl service the main computer can access the internet but will not work with linksys router attached...so no wireless. How do I reconnect the router?


turn off the modem turn off the router hook the internet on the modem to the router install cd and restart before restarting plug the router and the modem to the out let and restart pc

Aug 05, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Cannot connect lap top or printer wireless and also connect to the internet via AT&T motorola modem


yes. Here is Linksys' page on how to:

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3687

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Apr 12, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

My current equipment


yes you can the is modem goes connected to router

Feb 27, 2009 | Linksys Cable Modem

1 Answer

Have changed to att may I use linksys modem


Yes, you can still use the Linksys router with your ATT dsl modem. Could you provide me with the model or brand of your ATT dsl modem so I could provide you with the steps on how to setup your router?

Feb 27, 2009 | Linksys EtherFast Cable Modem with USB and...

1 Answer

Connection


Hi Susie
With related to your particular issue it seems like that your broadband modem is not configured for the router. There are basically 2 types of connection. DSL and Cable modem. Verizon, ATT are DSL and comcast other providers give you a normal cable broadband connection. If its comcast make sure the cable from the comcast modem is going to the internet port in the linksys router and also make sure that there is a system connection the linksys router and the cable from the system goes to any of LAN 1, 2, 3 and 4 ports. Then reset your cable modem by using a pin and inserting to the reset hole in the modem. You could use the same step to reset your linksys router as well .If its a verizon or dsl connection you need to put normally your username and password in the router page. here is the link to how to configure linksys for your internet modem.
Here is a video as well on it?
http://in.youtube.com/watch?v=vSAXMO7aNzg

http://tinyurl.com/5tqqhl


Also post the linksys router model. your ISP modem model number and also information on how many systems are wired to the router and wireless and let me know if you need more help.

Thank you
Rakesh
Dell Laptop Expert

Jan 09, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Cannot connect with ATT modem


Connect your pc to the ATT box. If online, check the ip address of the computer. If the ip address is 192.168.1.x, then you just have to change the router ip address. The wrt54g ip is 192.168.1.1, it may be having conflict with the ATT modem. Change the wrt54g ip to 192.168.2.1

Good Luck

Mar 05, 2008 | Linksys Wireless-G WRT54G Router

3 Answers

Wireless network broken, access to WRT54G & Motorola 2210-02 via http.. denied


I have att yahoo dsl which I installed about a year ago. The process required bridging the ADSL Modem (in my case a speedstream 4100) and accepting dynamic IP addresses and configuring PPPoE on the WAN side of my Linksys router. The ATT support person walked me through the entire process over the phone even though I was comfortable with making the Linksys configuration changes as I had to do the same in China without technical support. The modem configuration was no more difficult than the router configuration as it was performed from a web browser too. The biggest warning was that to reverse the modem change (if desired) required use of a reset button because the web interface was disabled as a result of the configuration change. My advice to you especially if you are willing to attach the Linksys router to the telco modem is to contact the ATT highspeed DSL support line and see if they will walk you through it like they walked me through it. Reviewing your Linksys User's Guide and understanding the configuration of that device would probably be appreciated by the ATT Support person as well as assuring you can access the Linksys router to configure it during the call.

Dec 08, 2007 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
2wire (1000-000005-002) 802.11g/b Wireless Adapter Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...