Question about Office Equipment & Supplies

1 Answer

Printing quality is very poor

I have a tvs dot matrix ,printing quality is very poor,what to do?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 32,281 Answers

The print quality of dat matrix printers depends upon the printer ribbon. If the ribbon is old or worn out then the print will be very light. In this case replace the ribbon.
Dot matrix printers are very old technology and I suggest you get a Inkjet printer or a laser printer.
Dot matrix printers cannot match the print quality of Inkjet and laser printers.

Posted on Jun 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Poor Print Quality


the print head has a series of pins that shoot back and forth striking the ribbon and placing a dot on the page, a series of dots create a letter etc. one pin is not working correctly. it could be the head but try re-instal drivers to eliminate that as a cause. if the line persists then i'm afraid it may well be the head to be replaced. good luck

Apr 06, 2010 | Panasonic KX-P3123 Matrix Printer

1 Answer

Poor print quality


Clean the print head again .......

Sep 07, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

Difference between dot matrix printer and laser printer


1. Dot matrix as the name suggests prints in small dots. The print out u get in railway tickets. 2. Laser printers are very speedy and have clear and sharp printing. There is no comparison b/w a laser printer and dot matrix. If dot matrix is 1st GEnaration than laser is atleast 10 generations ahead

Aug 20, 2009 | Absolute Software ComputraceComplete for...

2 Answers

I have poor print quality on my Lexmark 4550


That obviously shouldn't happen. Did you print an alignment page after you inserted the new cartridges? There could also be some clogged nozzles on the new cartridges. If you haven't contacted Lexmark technical support through www.lexmark.com, suggest you do so.

Aug 05, 2009 | Lexmark X4550 Multifunction Wireless Color...

4 Answers

INSTALLATION PROBLEM


howcan i get driver of tvs msp 240 classic free

Dec 01, 2008 | Epson LQ-2180 Dot Matrix Printer

2 Answers

To connect TVS MSP 345 Dot matrix printer with Laptop (Compaq) Usb port


Click here to open TVS-E support page, if the driver is not present on their website contact them at their toll free number.

alternatively you can download drivers below, after completing free subscription , following indication and chosing the free download to hard disk option.
download drivers here after completing a free subscription.

Nov 04, 2008 | Parallel USB Print Server 2 Port USB&1...

1 Answer

Print quality is very poor


I used to use an LX300 and have never had this problem. I'm not sure what unclear means so I will just do some guessing. Clarity of the print depends on 3 things, software, printhead and ribbon. These are your problem areas. Epson has an option to print NLQ or near letter quality. So that should give more clarify. I basically double prints the same letter to create a darker image. The printhead, if your printer is really old, you need to either find someone to refurbish the printhead or buy a new printhead because it could be the impact pins are bent and not giving the strongest image. Lastly the ribbon, obvsiously the more used the ribbon is the weaker the image. So either re-ink the ribbon or buy a new ribbon cartridge. Hope this helps.

Aug 05, 2008 | Epson Dot Matrix LX-300+ II Printer

1 Answer

Printer problem


hi
for high speed printing through your printer LQ1170 control panel by prassing font switch change to draft mode it will help full to you, but it may lighter your print quality .

thanks.

Nov 16, 2007 | Epson LQ1170 Matrix Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

554 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...