Question about Sony KV-35S42 35" TV

1 Answer

Screen will not light up.standby/timer light blinks continuosly

At first i could turn it on and it would have a good picture for about a minute then it would go black.i would turn it off and back on but still black and standby light blinks continuosly.i could turn it off and wait for about 30 minutes to one hour,turn it back on and have a good picture again for about 1 minute,then black again.after doing all this a few times i unplugged it for 5 hours.when i plugged it back up and turned it back on it would'nt light up at all.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,961 Answers

Check for any cold solder on the high voltage section of your tv A high voltage section is located at the power supply section, this is where the power cord is connected.resolder them,the horizontal section it is where the plyback transformer is located resolder them and the CRT board this is the boad that is attatched to the picture tube...good luck

please rate my help..

Posted on Jun 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture fades to black


Find the vertical IC and check for very small cracks on the solder joints of its pins and resolder (approx. 10 Pins). Also check in the same area for a 1 micro farad at 50 vdc capacitor that goes bad and replace it.

Dec 18, 2013 | Toshiba CX32F60 32" TV

1 Answer

47in Phillips-tv picture goes black still has


Could be the signal board has a bad cap, in this case it sounds like you are getting intermitten power to the inverters....when the tv goes down and of course you have audio....Shine a flashlight on to screen and see if you have a picture...look carefully. If this is the case..you have the above problem!

Nov 23, 2009 | Televison & Video

1 Answer

Toshiba Picture Not On


what you suggesting is that the lcd has a good maintenance needs that have to have cold solder or connectors are sulfated

Aug 22, 2009 | Televison & Video

1 Answer

No picture, good audio. Replaced motherboard...


I think I may finally have the answer for the "black screen of death" for the 42" Polaroid LCD televisions. I was having the same issue with the screen going black after a couple minutes of being on. I would shut it down then turn it back on and it would work again for 5-10 minutes. On the "power board" which is the board on top, there is a little red light that turns on when the screen would go black. above that there are 4 little switches, the lower on says BURN. I simply switched that over and the television has been working for 2 days for 8 hours + each day. Hope this help. Let me know

Feb 12, 2009 | Polaroid 4241-TLXB 42 in. LCD Television

1 Answer

TV Picture problems


My samsung did the same thing right before my color wheel went out. Can't be sure but that is what was wrong with mine. hope this helps.

Jan 25, 2009 | Samsung DLP HL-P4663W 46" Rear Projection...

1 Answer

60sx12b/13k black screen


Hi, you have some poor solder connections on the sweep board, this is an inexpensive fix for any tech to do, get it soldered and enjoy, good luck & Happy Holidays

Nov 28, 2007 | Hitachi 60SX12B/13K 60" Rear Projection...

1 Answer

Picture getting small blacking out


Yes you sound like pincushin is failing on you. Soon it will knock out horiz. output caps and Diodes. Needs repair soon.

Apr 25, 2007 | RCA F35673MB 35" TV

1 Answer

Black Screen/Viewfinder


Mine too! Thank you so much for posting this issue!!

Apr 22, 2007 | Canon PowerShot SD100 / IXUS II Digital...

Not finding what you are looking for?
Sony KV-35S42 35" TV Logo

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75581 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...