Hi I have a tx-sr606 receiver. Tv connection is

hi have you set your onkyo receiver if you have connected your hdmi lead to the receiver and an hdmi from receiver to tv you need to assign these connections via the menu on the receiver first then you will get a connection

Why don't you connect the HDMI cable direct to your tv. For audio run a digital cable to your receiver.

Pressed and held cable/sat button on front of unit until "Attenuate" came up. Changed setting from 0 to 2

en order to help out here a few questions need to be asked? Is the CBL/SAT connection VIA HDMI? Some HDMI signals will not pass CC and or On-screen display (OSD) via certain video modes. If all is analog video, not a problem, if mixed with component and HDMI and analog, you may experience issues. Let me know your thoughts and the best of luck.
techhome100

The HDMI version in your receiver is 1.1 or 1.2 which will not pass video as it should. It's not Onkyo's firmware at issue, it's HDMI and in all receivers up to 2008 model year this is a very heated problem! The only fix is to run FIOS directly to the TV via HDMI and run it's audio to your receiver with Digital Coaxial or Optical. Hope this helps

Not sure if this is your fix, but I had what I thought was the same problem. I played with my Onkyo quite a bit ensuring the correct assignments for HDMI, audio and all that stuff. Turns out I neglected to make sure the output devices were properly assigned. Many devices aren't default to output sound over HDMI. I changed the audio out settings on the cable box to HDMI and suddenly the Onkyo worked great. I know, I'm an idiot for not checking that in the first place, but maybe someone out there is having the same trouble as well.

The PS3 should default to the DOLBY DIGITAL sound output so your ONKYO should be setup to the Digital input, TV logic is a matrix similated multi-channel and I doubt if any PS software is in the DTS audio format, look at your game software disc`s and they will inform you of the audio capabilities.

alot of times , you need to go into the bluray menue under audio, and make sure audio output is set to hdmi, and not componant

Hi there. for your receiver, the only time it can upconvert is when you go out as HDMI. In your current hookup (component out to tv) the signal from your cable (using a composite) will not be able to pass through the component cable. This means you either have to hook up your cable box using a component cable as well or add a composite cable (yellow) from monitor out of the receiver to the tv. Page 22 of the manual will show a diagram of the video signal flow. hope this helps.. ^_^

try using a HDMI cable connecting the receiver from the "out" to the tv, then allocate through the setup menu what you have connected, say a cable box by hdmi, you would go to cable/sat allocate the port "hdmi1 or coax 1" then return. If it is a dvd click on dvd then allocate eg: "hdmi 2" then return.