Hello I have a 50 inch lcd tv and the past year or so it seems like the convergence is going out i see double image now on screen and blurry picture.I have been told that this tv doesnt have a convergence adjustment and not sure what to do next help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I ran into Bee Hive of problems and don't know where to start. I have read problems that are related to the convergence , one definitely a fan motor. A couple sounded like the color IC on the CRT board. Some sound like bad caps in the power section. Some sounded like a picture tube alignment problem. The one that wouldn't turn off sounds like a relay stuck or burned closed. As I read down I noticed some problems that would have to be done in a well equipped shop.. I really don't know where to start. If someone will give me a specific problem I will try to solve it. Reading down I got confused, is this all one TV?
The tv is having a problems known as a convergence problems,it dead.Tv have R,G,B colors lines mis alignments,have colors shadows pictures or 3D pictures look alike?Yes.The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.The tv convergence board,must have these parts replaced to fixed the tv convergence board to solved the tv convergence picture problems.The shop will cost u like $300-350 for parts and labors.
Tv have a problems know as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all it resistors too.These parts must be replaced on the tv convergence board to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.
This is not a LCD tv,It a DLP tv.This tv have a problems known as Convergence problems.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the convergence board must be change to fixes 3D pictures,shadows colors pictures and Green,Blue,Red colors misaligns,don't matches up to form a good picture.The shop will u $300-350 for parts and labors.
If the green fuzz is only seen sometimes, it may be a cable issue. Check your cables to see they are tight and perhaps even replace them if the issue persists. If this doesn't solve your problem, the TV may have technical problems beyond your ability to fix - sounds like power issues.
No. I would suspect it being a Optical Block issue. I is not a pretty repair not to mention the cost factor. If you could get in touch with Hitachi Customer Service they could lead you to s service facility that could comfirm what I think.