Question about Garden

1 Answer

Genrac power washer chemical injector not working

I replaced the chemical injector on my genrac model g24h, but it still does not feed chemical.
cleaned out the housing, with air and wd40, wondering if there is something else i should try... please offer any advice

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

How long is your high pressure hose and what diameter as it maybe to long and won,t **** chemical due to back pressure. To test this remove the high pressure hose and run the machine and check too see if any chemical is coming up the pipe. If it does then its a problem with your hose or the adjuster is not going to low enough pressure.

Posted on Jun 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where does the hose go into a briggs and Stratton Quanum XTE Power washer?


I suspect you are asking about the chemical injector.
there is a brass barbed fitting that you should slide the chemical hose over, not the black nipple

Oct 05, 2014 | Briggs & Stratton Garden

1 Answer

What is causing water to leak out of the resovior when the power washer is running?


I am assuming you mean the chemical resovoir tank? If water is running out of it then water is coming back up your chemical injector. This usually means at some point the ball and spring in your injector got stuck...typically people take them apart at the nipple to ry and fix it. not realizing there is a small ball and spring in that nipple. This is actually a ball valve to prevent water from coming out of the chemical injector nipple. Replace the ball and spring if needed as well as the oring seat in the nipple. This will stop your tank from filling up. Good luck

Sep 06, 2014 | Honda GCV160 5.5HP 2300PSI GAS-POWERED...

1 Answer

Husky HU 80522 pressure washer - some pressure to the spray gun. water coming from the pump goes straight to the sifon hose used for detergent. Can this line be clamped of if not used?


This unit has a Faip pump on the unit, no water should come out the chemical injector. The chemical injector can be closed off with no problem by installing a plug where the chemical injector hose bard is currently located.
You can also replace the chemical injector, here is a link to view the part.
www.allpartsinc.com/ProductDesc.aspx?code=KTRI91351

Mar 29, 2012 | Garden

1 Answer

I was able to use soap all last season, this year, i cannot get it to come thru, i know all about the low pressure deal, it seems to be clogged/ is there any way to specifically clean it where it enters...


Soap injectors are easily clogged or will not work because of design (air leaks will prevent chem from entering if chemical has to be drawn uphill) . They work with siphon action and will only work with very little pressure at the tip but good volume. If your siphon valve has the ball in place, however is missing the fine spring that holds the ball against seat (fine spring holds ball aginst intake fitting), the soap will not be sucked into stream. If ball and spring are in place, try elevating the soap container higher than the opening of the port (gravity feed may help to feed soap into system) . May be better to use an aftermarket downstream injector valve sold on ebay or many outlets. Cost about $20 but work better and are adjustable to save on soap. Search ebay for "Chemical Injector For Pressure Washers" or google "Pressure Washer Downstream Chemical Injectors" Various prices but lower price units work better than factory. Good luck

Jul 18, 2011 | Honda Black Max 2600 PSI Pressure Washer

1 Answer

Why want my pressure washer suction the solution while pressure washing the house?


The first problem might be that you are trying to use the wrong nozzle, see this link to read more about what nozzle to use for detergents

If you still have an issue the problem is going to be in the chemical valve on the pump, there are two different styles they have on this type of machine, look at the links below on directions on how to repair your chemical valve.

Chemical Injector 1

Chemical Injector 2

Nov 11, 2010 | Karcher 2500 PSI Pressure Washer

1 Answer

I recently purchased a northstar 4000 psi pressure washer. I had the same series pressure washer for the past 6 years and used a downstream chemical unloader quick connect to pull chemical. I attached it...


The injector might be worn out or have something inside of the valve causing it not to ****. If you are using a new high pressure hose or a longer hose this may also have an effect over the injector not working.

Oct 06, 2010 | Northstar Professional Series Pressure...

1 Answer

G-3050 - area to draw soap - how to put washer/ball and spring


First off you must be using the low pressure nozzle for the chemical injector to work. It will not work on high pressure. The spring goes into the injector body first with the ball in metering valve.

Apr 17, 2010 | Karcher 2500 PSI Pressure Washer

1 Answer

How do you adjust the chemical feed on a Annovi Reverberi pressure washer pump?


your chemical feed works on most units on low pressure. there should be a adjustment nob red on the intake unloader. if not its preset

Oct 10, 2009 | Annovi Reverberi Garden

2 Answers

Dewalt 3700 pressure washer will not take in the cleaning solvents works fine but will not spray chemicals


Be sure that you have your chemical injector plumbed correctly. They will only work one way.

Oct 08, 2009 | Dewalt 3700 Pressure Washer

Not finding what you are looking for?
Garden Logo

Related Topics:

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

roeb

Level 3 Expert

540 Answers

john h

Level 3 Expert

12650 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...