Question about Electrolux Washing Machines

1 Answer

Hi My Elecrolux washer EW1050F has no power coming to it anymore. It started playing up months ago and it was hard to start. It would just sit and blink on start/pause button and door would take some time to lock. But eventually it would come to life and wash. This morning the power is not on at all. I have checked the lead and all is perfect. What has happened? Is it going to be an expensive fix? The mashine is 6 years old exactly.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. From what you have described it seems to be an issue with the control panel going bad and needs to be replaced. You can take the front panel off and then check the wires connecting to the control panel, if everything appears to be fine then you’ll have to replace the control panel. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks

Rylee


Posted on Jun 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drive sprocket nut comes loose when I try to start 2-stroke bike engine. Tightened it 3 months ago with impact wrench. What's needed to make it stay?


Usually there is a washer that sits under the sprocket that gets bent over to stop the nut undoing. The washer is specific and the internal hole will match the splines of the sprocket holder so it doesn't spin freely when it is on
The link below shows a photo of what I'm talking about
http://faq.f650.com/FAQs/Photos/ChainPhotos/ChainCSSprocketNut.jpg

Dec 15, 2015 | Motorcycles

1 Answer

Loss of power and shuttering when accelerating


You sure filter is facing flow correctly?:I'd check that first,some cars/trucks have in-line filters.

Feb 10, 2014 | 1996 Chevrolet Tahoe

1 Answer

It has been sitting or 3 months and won't start and it is a kick start Suzuki 4 wheeler and it was running great 3 months ago but this cold whether I think is what the problem is .


Hi erik
My first point of call would be to clean the spark plug, it could have gotten corroded while the bike has been standing. Hope this helps.

Feb 20, 2013 | Motorsports

1 Answer

1997 buick hard to start why?


Have the fuel; pump checked for pressure bleed down after sitting, it should hold pressure within 5 PSI of rated running pressure after shutting sown the engine for extended periods.

Sep 02, 2012 | 2002 Hyundai Santa Fe

1 Answer

I bought my new husky/ honda gcv190 about a month ago, i haven't even started it yet. I didn't realize that the owners manual was for a totally different power washer. I don't want to bid on one,buy one or...


http://www.apwdistributing.com/

You should be able to download a pdf version of the owners manual here.. you will need your model number.

Model number HU80432 uses the Honda GV190 Motor

Best of luck!

Apr 12, 2011 | Garden

1 Answer

My mac is not recognizing my Lacie 1 TB, it started a week ago. It used to work fine for 2 months or so. I got this Lacie less than 3 months ago. I have fully stored my all my music there, but now I can t...


I had the same issue -- turned out that power supply was going bad so the drive wouldn't spin up all the way; this could explain the strange noises you're hearing. I put in a support ticket with LaCie at their website and they sent me a new power supply at no charge (I was within the warranty period, I think).

Mar 08, 2009 | LaCie Hard Disk 1TB Desktop with Hi-Speed...

3 Answers

1998 Chevy tahoe Hard to start when cold


replace your MAP sensor(manifold absolute pressure) the map sensor is the computer for your fuel pressure regulator telling how much pressure. Unless your tahoe runs like **** going up hill than it inevitably your fuel pump

Feb 17, 2009 | 1999 Chevrolet C/K 2500

3 Answers

Whirlpool duet sport washer 3.6 WFW8410SW cycle will not start


set it to spin dran cycle and select no spin and push the rinse hold button 4 times it should read c00 on the dis play and go thew to c08 it will lock the door frist and then go thew all the cycles it will flash on a c# that has trouble

Nov 29, 2008 | Whirlpool Duet 3.8 cu. ft. Front Load...

1 Answer

Starting dryer


THE HUMMING IS THE WATER VALVE WHICH IS OK,CHECK WATER PRESURE AND FILTERS IT MAY BE DOOR INTERLOCK

Nov 27, 2007 | Zanussi WJS1397W Front Load Washer / Dryer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Washing Machines Experts

Tim Whalen

Level 3 Expert

3072 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you an Electrolux Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...