Question about Nitro BMW-486 Car Audio Amplifier

1 Answer

How do i wire three ma audios 12" to one hifonics brutus 2000 watts amp? at 500rms each speaker? what is required?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 256 Answers

Firstly, lay all 3 speakers face down next to each other. Note the connections +- +- +-. The first + will go to the amplifier. The next terminal(-) will be connected to the center speaker(+). Take the center speaker (-) and connect to last speaker (+). The last terminal(-) will go to amplifier. Please note that your amplifier has a bridge section which is normally the first + and the last- on the two channels. Connect your woofers on the bridge.

Posted on Jun 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2 Pioneer TS-W3002D4 12 In and a Hifonics Brutus BRZ1200.1D D-Class Mono Block what's the best wiring


you need to wire each sub down to 2ohms then wire them together like the one in this pic http://m.seimg.net/product/img/subwoofer_wiring/2_subs_DVC_4_ohm_mono_variation2.jpg witch will give you 1ohm so you will be getting every bit of power that amp has but you should get a bigger amp for thos speakers

Mar 24, 2013 | Car Audio & Video

1 Answer

I have 2 12 inch jl audio w7's with a kicker crossover and a powerbass equalizer 5 bands. i wanted to know if add a hifonics brutus 2100 d class amp to my subs at 1 ohm would it over power my subs. please...


Short answer: NOPE!

The Hifonics Brutus 2100 is stated to produce 2100 watts RMS @ 1ohm load. Most amplifier manufacturers overstate their claims. The 2100 watt output is most likely at 14.4 volts and not the 12.6 volts your car will actually be providing the amp.

But, even if the actual output was 2100 watts that would be 1050 watts to each 12w7. The 12w7's are rated at 1000watts RMS and 2000watts peak. As a MECP certified installer, any system I have done using 12w7's have had a MINIMUM of 1000 watts being provided to each speaker. My personal preference is to run 1500 watts each and keep the gains adjusted lower on the amp. Thus allowing the amp to run cooler and allow the additional headroom for those "show-off" moments!

Dec 22, 2010 | Hifonics Car Audio & Video

1 Answer

Will hilfonics brutus 2010d mono work??


Well with the correct powering system, heaps of paralleled 12 volt Batteries, & a Beefed up Alternator to charge them, I guess so, BUT it is only Mono, so you will need TWO to provide stereo output

Mar 06, 2010 | Hifonics Brutus BX 1605D Car Audio...

1 Answer

I have a 2000 watt hifonics brutus amp ...it worked fine but 1 day it just stopped working..the power light doest light up but the hifonics led lights are still on...whats the problem?


there is a step up converter inside the amp that likes to come loose from the board. This may be your problem. Otherwise Check all the chips for burns or disconnect

Nov 13, 2009 | Hifonics Brutus BX 2005D Car Audio...

1 Answer

Illuminating the sub


i would assume hooking it to the remote and ground of the amp

Apr 24, 2009 | Hifonics Brutus BX12D4 Car Subwoofer

1 Answer

Hifonics brutus 2000 watt help??!!??


If an RCA took a dive your amp has most likely seen a very nasty input spike and may never be the same as its circuitry has been damaged.....sorry

Mar 09, 2009 | Hifonics Brutus BXi 1206D Car Audio...

4 Answers

No sound in my Hifonics Brutus BXi 1206D amp


Have you confirmed that you have a good signal feeding the amp?

Have you confirmed that the speakers are in good working order and don't have any breaks in the wiring?

Jan 01, 2008 | Hifonics Brutus BXi 1206D Car Audio...

Not finding what you are looking for?
Nitro BMW-486 Car Audio Amplifier Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nitro Car Audio & Video Experts

ravie__s

Level 1 Expert

10 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

Are you a Nitro Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...