Question about Electrolux Dishwashers

1 Answer

Dishlex global 500 dishwasher says ''of '' . It will not stop making weird noises. I Have had to turn it off at the wall.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 159 Answers

Hi there.this is (over fill error).It has over filled & flooded water down into the base.It has tripped a flood switch in the base wich turns the drain pump on even though the washer is off.You can simply try tipping the washer to get the water out or you will need to disassemble the front kick panel at the bottom front to mop out the water.The switch will reset after you do this.Or wait a couple of days and the water will evaporate enough that the pumping will have stopped & the washer should work again.The booklet for your washer has water hight level settings in it.Sometimes someone leans against the washer and presses the buttons wich changes the water level to high & thats why this has probably happened in the first place.It may need setting to a lower level.

Posted on Jun 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishlex global300 is gone into flood mode how do I fix it


Dishlex Global 300 Dishwasher issues - Kitchen - Home - Whirlpool ...

forums.whirlpool.net.au > Home > Kitchen

WhirlpoolAug 31, 2011 - As stated in the title, it is Dishlex Global 300 model and it was here when ... is flooding about to happen inside the DW and prevents flooding). Bosch or Asko dishwasher
Mar 7, 2014
Dishwasher that actually WORKS PROPERLY?
Dec 3, 2012
Dishlex Global 300 dishwasher woes
Aug 8, 2005
Dishwashers ...
Mar 28, 2004
More results from forums.whirlpool.net.au

Nov 25, 2015 | Dishwashers

2 Answers

The door is stuck closed on my Vulcan Dishlex 500 ECO Dishwasher. i have tried to lever it open with a spatula applying downward pressure on the internal latch w and simultaneously lifting the door...


Hi just read your posting.What you need to do is to get a pointy small knife and put it between the door and frame and move it till you stop at the internal latch.Now lever the latch up and pull the door open.The part you need to change is the t shaped plastic rod.Please turn off the power before you undo the screws to change the plastic rod.Please reply for further help or information.Looking forward to your reply.

Jun 19, 2011 | Dishwashers

2 Answers

I have a dishlex Global 500 which runs for 3-5 minutes then displays nF


nf= not filling. check inlet vale, or fault will be with pressure switch. If you have poor water pressure, you may need to increase the fill time- insructions can be downloaded from:www.electrolux.com.au, click on "customer service", then "download manuals", then Dishwashers-semi integrated, electronic, then download Dishlex Global Part 1 and Part 2.
Information on setting fill time can be found at the back of Part 2, but Part 1 has a list of the fault codes

Aug 05, 2009 | Dishwashers

1 Answer

Dishlex Global Unable to remove heater element retaining screw


I have a simialar problem with the Dishlex 450 Global model, after searching for the heating element on line, I found a picture of the element (450 model), showing that the Stainless Steel screw is actually spot welded to the element bracket, hence you should be able to remove it by accessing a retaining nut from underneath the dishwasher....(turn power off first!)..

May 24, 2009 | Electrolux 18 in. ESL4114 Slim-Line...

1 Answer

Dishlex global 500 rinse and wash problem


This was due to a faulty pump motor which I have now replaced.

Jan 10, 2009 | Dishwashers

1 Answer

Dishlex Global 2000 starts makes a constant noise tries to start up then stops. Bit of water in the bottom of the dishwasher. Lights flash but does nothing


have you checked that your outlet pipe is not blocked. if it is blocked machines are designed to stop to prevent flooding. this may explain why there is water in bottom

Sep 03, 2008 | Dishwashers

1 Answer

Dishlex Global 500 dishwasher


theres a round plug in the top of dish washer pull it out and clean could be cloged or the bottom spram arm can be pulled out and cleaned aswell

Aug 24, 2008 | Electrolux 18 in. ESL4114 Slim-Line...

1 Answer

Dishlex global 300 dishwasher, eco light flashing sounds like pump noise but not working


Try taking the dishwasher out of its wall space and tipping it back and forth. Apparently the weight of water gathering in some component triggers the 'eco' function. Failing that, last time it happened to my dishwasher i waited a week for the repair guy to arrive, by which time the water had evaporated and there was no longer a problem..

Jul 26, 2008 | Dishwashers

4 Answers

Dishlex Global 300 Dishwasher


Thomo, make sure the sprayer holes in the spray arms are clean. Grains of rice seem to be a dishwashers biggest enemy as they don't desolve and eventually end up lodged in the spray holes. The holes at the end of the spray arms are the ones responsible for the washing out of the soap powder from the dispenser, if they are blocked this does not happen.
Hope this helps
Cheers

May 29, 2008 | Tecnik 24 in. TKD795/3 Built-in Dishwasher

2 Answers

My dishlex global 450 dishwasher was making a humming noise all night and dispayed OF before I disconnected the power to it. Thanks Karen kar14839@bigpond.net.au


The of means the grease trap is over full or over flowing and needs to be serviced. This is best done by a qualified serviceman.

Apr 06, 2008 | Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

536 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

kakima

Level 3 Expert

102366 Answers

Gerard Curran

Level 2 Expert

114 Answers

Are you an Electrolux Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...