Question about JVC CH-X1500RF 12-Disc CD Changer

1 Answer

I wanted to ask how do I get the JVC CH-X1500RF 12-Disc CD Changer to operate? Where does the unit get power, and how can I connect speakers?...Henry

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 149 Answers

These multidisk cd changers usually get their power from the operating system that you have in your car. These systems connect directly to your main radio and operations of it are all from the drivers seat. therefore you do not need to connect any speakers or power cables up to it. It should come with a few cables that help you to connect to your radio.

Posted on Jun 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is the JVC CH -X400 compatible with the KS-FX222E?


Hello
The devices you specified here; JVC-CH-X400 and JVC KS-FX222E are non-compactable.

May 26, 2011 | JVC CH-X400 12-Disc CD Changer

1 Answer

Sound from CD changer is distorted


hi my names josh so you have a 12 disc changer with a factory radio with an RF modulator hmmm well i could definely see that being your problem right there. usually your best shot is always a strait connection from and after market reciever to your changer without that RF modulator in line. That being said since your signal RF out to the changer is giving you your sound its very posible you would need to use a ground loop isolator to eliminate that noise. it would plug line out from the modulator going to the changer and in most cases provides a stable ground in the line which is most cases is the problem in your case i would be willing to bet thats yours.

Mar 03, 2010 | JVC CH-X1500RF 12-Disc CD Changer

1 Answer

I have a jvc 12 disc changer for my car ch-x11 and I would like to know what radio station i need to set it on for it to work?


The CH-X11 needs to be paired with a JVC CD controller. See the downloadable manual at
http://books.jvc.com/booklist.asp?Model=ch-x11
This unit does not broadcast at the lower FM band.

Mar 02, 2010 | JVC CH-X1100 12-Disc CD Changer

1 Answer

JVC CH-X1100RF LCD flickers


Nope. Its getting to the end of its days. I'm guessing by your description you tend to play your music loudly like I do. Well when you do that it causes vibration. Vibration+electronics=Short life span.

Jul 07, 2009 | JVC CH-X1100RF 12-Disc CD Changer

1 Answer

I just bought a car and when i popped open the trunk there was a 12 disk jvc cd changer, its all hooked up i just don't know if it works because there is no remote and the changer won't open.


Look for a cable from the disc changer that heads towards the front of the car. Generally if you pull one of the kick rails beside the seats you will find the wire. It will be grayish black and almost the size of a USB cable 10 to 12 gauge. Follow it under the dash, if your lucky you will find a silver box which is the fm converter then a small LCD display about 1 1/4" tall and 2 1/2" long. That's the Receiver/Display. Then you need the remote, if you don't have one, go to any car audio shop & let them know what you've got and they can get you what you need and make sure the unit is ok. Hope this helps

Jun 23, 2009 | JVC CH-X1500RF 12-Disc CD Changer

1 Answer

JVC CH-X1100RF 12-Disc CD...


50 % OF THE TIME THE MICRO CHIP NEED TO BE RESET CUT ALL POWER FROM UNIT LIKE UN PLUGING CABLE FROM BACK OF CHANGER FOR 5 SEC LET ME KNOW

Jul 13, 2008 | JVC CH-X1100RF 12-Disc CD Changer

1 Answer

Wont eject


check the eject button switch if it is good,and replace the belt in the spindle motor

Oct 29, 2007 | JVC CH-X1500RF 12-Disc CD Changer

Not finding what you are looking for?
JVC CH-X1500RF 12-Disc CD Changer Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

kakima

Level 3 Expert

102366 Answers

xxxxxx xxx

Level 3 Expert

4874 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...