Question about Briggs & Stratton Garden

1 Answer

I AM REPAIRING A SNAPPER COMET 30 B/S 7HP RIDING MOWER: (APX. 1966-1969) 1) TIRE PRESSURE? FRONT-410/350-4, REAR-16 X 6.50-8 2) WHICH FRONT BELT PULLEY DO I LOOSEN TO ADJUST OR REPLACE BELT? 3) REAR AXLE ASSEMBLIES THERE ARE TWO ENCLOSED GEAR HOUSINGS, ONE WITH TWO PLASTIC PLUG CONTAINERS, THE OTHER WITH ONE PLASTIC PLUG CONTAINER, HOW MUCH GEAR OIL DO I USE TO FILL THEM FOR LUBRICATION? 4) WHERE CAN I GET A COMET 30 MANUAL AND 7 HP BRIGGS & STRATTON SPECS MANUAL? MODEL NO. (ON TOP OF 7HP ENGINE) M170702 TYPE 1133-01 CODE 7008101

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Chances are you wont get a manual, just lube it up.tires probably 12 to 15 lbs .the belt is mecanicly tensioned so there is no adjustment. Check the idler pully tensoner and ingage lever for proper travel and tention

Posted on Jun 20, 2011

  • antenginegod Jun 21, 2011

    Make shure your axle boots aren't cracked or missing, what cind of carb and gas tank do you have?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On the Zero turn mower , how do you relieve the air in the pump lines after replacing a bad pump . Please advise.


How To Release Pressure From Fuel Lines - YouTube

? 0:51
www.youtube.com/watch?v=6oo9zlTMPOQ
Oct 15, 2009 - Uploaded by YeechBlitz
See a demonstration on how to release the pressure from fuellines of a 1997-2000 ... in the tank, but do not let the air out, so pressure can build up in there. ... Diesels is where you want to be extra careful, the injector pump to ...

5900748 Snapper Zero Turn Mower - Hammerwall

www.hammerwall.com/.../Snapper/.../5900748/Snapper%20Zero%20Tur...
Back To Snapper Tractors-Riding-Lawnmowers Model: 5900748 Snapper Zero ......Reinstall each mower blade with the air lifts pointing up towards the mower deck ... The fuel filter is located in the fuel line betweenthe fuel tank and fuel pump . .....TROUBLESHOOTINGTHE RIDER PROBLEM CAUSE REMEDY Enginewill ...

Sep 25, 2015 | Briggs & Stratton Snapper 5900748 355Z...

1 Answer

How long is the deck belt for a snapper riding mower LT 150H38IBV


Go to the Snapper Website, Go to Manuals/Parts lists, enter the model and serial number of the mower. Scan for the proper diagram, copy the belt serial number. Go to a belt specialty retailer, present the belt serial number. They should be able to supply the belt length, and probably the belt.

Sep 12, 2015 | Snapper Garden

1 Answer

Mower belt diagram


Snapper Mower Manuals with belt info and diagrams can be found at:
Find Your Snapper Manual Parts Lists
http://www.snapper.com/us/en/support/manuals

Aug 12, 2014 | Garden

1 Answer

Having a hard time trying to get the rear wheels to spend on rear wheel Drive snapper push mower,,


Getting the prsh wheels to drive the mower is a simple task. They are belt driven so either the belt is clogged, or there is something on the pulleys that makes them slip. You may have to flip the machine up on the front end to see the pullies and clear them. If things are very wet, that could also cause those symptoms.

Jan 03, 2013 | Garden

1 Answer

How can you tell if the driving wheel needs replaced on snapper comet riding mower


the rubber wheel will be cracked and slip when its bad only 3 bolts to change it just stand it up on the rear bars and change it thats what there there for

Sep 10, 2012 | Garden

2 Answers

Belt diagram for snapper lt 200 riding mower


PLEASE SHOW ME A DIAGRAM OF ACTUAL BELT AND PULLEY'S FOR SNAPPER LT 200, MODEL #2690441?

Mar 12, 2011 | Garden

1 Answer

Snapper comet rubber drive


Get a new drive wheel.
Put mower in neutral.
Stand mower on rear supports.
Remove the four bolts holding the old wheel.
install new wheel.

Jun 15, 2009 | Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Briggs & Stratton Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

John Trevino

Level 3 Expert

1383 Answers

donald boissonneault

Level 2 Expert

110 Answers

Are you a Briggs & Stratton Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...