Question about HP LaserJet P3005 Printer

1 Answer

I am getting the error:49:4c2d error turn off the on i have turn it on the off but still the problem it still there and now its just freezz

Posted by Anonymous on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 87 Answers

Common with the P3005 anymore thanks to our "friends" at HP having this stuff made in China. Chip failure in the formatter board causes freezes, your 49.xx error, blank display, more. Formatter must be replaced and is simple.

If your machine has USB and parallel (no networking) then the formatter should be Q7847-61006 and if it has built in network and USB (P3005N and P3005DN) then its a Q7848-61006. Liberty Parts Team at (Colleen Longseth) has refurbished without need to send the bad board back at reasonable pricing. Be sure to give the agent the model of the machine, starts with a Q.

Since you cant get a configuration page out of the machine you will have to start at 0 on page counts but once the formatter is replaced go down the menu to SERVICE and when prompted for PIN insert 10300506 to access the service menu.

Service manual free download at - down the left navigation bar is an icon for service manuals - click and get what you need in PDF - dont make ebay sellers rich selling copyrighted PDFs illegally.

Posted on Jun 25, 2010

  • Russ Blakeman Jun 25, 2010

    The P3005 is known to have problems with a chip on the formatter, gives
    various errors to include the 49.2d9d, blank display and others. HP has
    not issued a recall or service advisory but is fully aware of failure
    of the chip on the formatter. Repair for this is to print a
    configuration page, replace the formatter board, bring the machine back
    up in service mode and put in the correct serial, service code and page
    counts into the new formatter's nvram memory.

    Liberty Parts Team
    at has refurbished formatters at reasonable pricing with no
    return core to worry about. The PIN needed to access the service mode is

    Other problems with the P3005 are grinding in the
    fuser area, correctable by removal of the fuser, replacement of the 4
    accessable gears in the side (left as you look into the back) and the
    main gear on the fuser then put the fuser back in and should be good.

    manual available for free at - down the left navigation
    bar near the bottom is an icon and link to service manuals in PDF. No
    need to make someone on ebay rich selling copyrighted pdfs.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is it good for compressor to run allways

No... If the thermostat is set too high so that the fridge can never get to the required temperature then you have to ask whetther the fridge/freeser? needs to be so cold. If your home is very warm and the unit just about copes with chilling and freezzing your food maybe you need a more effective fridge.
You can always turn the thermostat fown if it is not very warm as long as your food is preserved/stored safely.

The compressor should go off, you will pay a large electricity bill if it does not.
If the unit is not working very efficiently have the freon level checked, might need topping up


Jun 16, 2015 | Refrigerators

1 Answer

How to flush heater core 1997 saturn

how could i get my ac to work it just leak out d anti freezz

Jan 22, 2011 | 1997 Saturn SL

1 Answer

My coils are freezzing up ,how do i check my defrost heater in fridge


Check out these tips...they can help you figure out what is going wrong withyour refrigerator and why it is not cooling

Refrigerator not Cooling or Fridge not Cooling

How to Defrost Refrigerator Defrost Timer Problem

Water Running in refrigerator from Freezer

Refrigerator or Freezer not Cooling or Getting Cold

Jan 11, 2011 | Refrigerators

1 Answer

Ok, I was playing NHL11 (PS3), then it froze. I turned off my system, and tried to play again. It didn't work. I tried all my other games, and they didn't work either. I hadn't been playing long, I don't...

try to warp it in a blanket for about 30min for it to heated up thin let it cool down fo 15min make sure it get no air for 30min. that should take care of the freezz.Let me know if that works for you

Jan 01, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

Freezzes on ups connection when it comes on in my car.

turn your 4040 on, then when it freezes, use a paper clip or something similar to depress the reset switch located on the lower left side of the 4040....if that fails, let me know and i will help you fix this.

bill 97f0bf2.gif

May 10, 2010 | Magellan Maestro 4040 GPS Receiver

1 Answer

Its going find every oneanwile staysblue

might os problem or installation find new xp sp 2 cd

Sep 23, 2009 | Microsoft Windows XP Professional With...

1 Answer

When i turn my psp on it freezzes then shuts off

if u tried changing the xmb waves, look for original sony waves file on google. then put the file"system_plugin_bg.rco" file to flash 0/vsh/resource.
if u didn't just rehack the psp.
if u didn't hack it at all, contact sony, i broke my ps3 once and they sent me another one 4 free. hope this helps.T_T

Dec 10, 2008 | Sony PlayStation Portable (PSP) Console

2 Answers

Acer aspire 5520-5908

mouse freezze and when I type it tends to jump to the beggining of the letter

Jul 16, 2008 | Computers & Internet

2 Answers

Mouse tends to freezze and when I type in tend to jump

first try another mouse may have faulty mouse.
o to start/control panel/mouse/ check settings

Jul 16, 2008 | Computers & Internet

1 Answer


Sorry but Your ps2 wont support Mp4's .But you can use winamp to convert your mp4's to mp3's

Nov 26, 2007 | Sony PlayStation 2 (PS2) Console

Not finding what you are looking for?
HP LaserJet P3005 Printer Logo

2,410 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Ben Johnson

Level 3 Expert

685 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides