Question about Whirlpool Gold White-on-White 21.9 cu. ft. Conquest Side-By-Side Refrigerator with Ice and Water GD2SHAXLQ Side by Side Refrigerator

1 Answer

How do I change the filter?

I do not have the manual- I just moved into the house and the red light is on to change the filter on the refrigerator.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Here's the link to printable user instructions:

http://www.whirlpoolappliances.ca/assets/zltVF596vquA4jOb-B2z_140ao-uI09F.pdf

If you need additional assistance, call the toll free number below. Whirlpool customer service requests you have the complete model number available before calling. This information can be located on the inside wall of the refrigerator.

1-800-253-1301 - In the U.S.A.
1-800-807-6777 - In Canada

Posted on Jun 03, 2010

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mrbobfixit
  • 259 Answers

SOURCE: I have a ED5PHEXRQ00 refrigerator. The red light

Your filter is located in the grill of the refrigerator (below your doors) and has a small plastic "handle" or "knob" on it. Turn the handle counter clockwise so that the line of the handle points up and down and pull out the filter. Save the handle to slide onto the new filter. I also believe that you will need to press the light switch in the refrigerator five or six times to re-set the filter status.
Filter is part number 4396710
Good luck!

Posted on Jun 27, 2010

  • 1 Answer

SOURCE: I have a Maytag side

I have a Maytag side by side with water/ice dispenser in door and filter for water. I changed the filter upon moving into house the change filter light came on and I can't get it to go off. How do I reset the change filter light (it's not time to change the filter)? The model # is MSD2732GRW and I don't have a manual for this refrigerator. Thanks!!

Posted on Jan 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I changed the filter and now no water or ice will come out.


The replacement filter may have been installed backwards.

Nov 20, 2014 | Refrigerators

1 Answer

Red light on to replace water filter, how to do this?


Knowing just who made your Kenmore refrigerator may some day be important because Kenmore does not make the brands they sell. I am going to try to get you as many different ways the water filter can be changed as I can but if you can you locate the model number of your Kenmore it may make things much easier should you need parts or a manual some day. The number should look like this 521.345678 and located around the inside of the fresh food section door.
6_25_2012_9_42_33_pm.jpg
Here nis what I have found on different models and water filters from Whirlpool How to Replace In-Grille Refrigerator Water Filter - Push Button
How to Change the Water Filter in Your Refrigerator
Whirlpool Part UKF7003

How to Change a Kitchen Aid Refrigerator Water Filter

Read more:
If by chance you are able to find your model number that looks like the 513.235647 I mentioned before this will solve just what instructions you need or you can post a photo here or swend one to my email appliancepartsse (@) yahoo.com and I will be glad to help you get a manual and instructions for changing your water filter, Thanks Sea Breeze

How to Replace Interior Refrigerator (Filter1) Water Filter





Jun 25, 2012 | Kenmore Side by Side Refrigerator

1 Answer

After i change the water filter de button of water still red


The water filter status light, located at the top of the refrigerator

compartment, will help you know when to change your water

filter cartridge.

Style 1 - Standard status light (on some models)

When the water filter status light changes from green to yellow,

this tells you that it is almost time to change the water filter

cartridge (90% of the filter life has been used). It is recommended

that you replace the base grille water filter cartridge when the

water filter indicator light changes to red OR water flow to your

water dispenser or ice maker decreases noticeably. See

"Changing theWater Filter Cartridge" later in this section.

After changing the water filter cartridge, reset the water filter

status light by pressing the light switch 5 times within
10 seconds. The water filter status light will change from red to
green when the system is reset.
If you need Adobe Reader Click=> Adobe Reader X (10.1.0) (50.25 MB)
If helpful please rate this solution, Thanks Sea Breeze
Click Photo Below for User Manuals


sea_breeze_227.jpg

Jul 29, 2011 | KitchenAid Superba KSRG25FK Side by Side...

1 Answer

How do I change the water filter


Removing and replacing a water filter - upper right hand corner location

Filters situated in the upper right hand corner of the refrigerator compartment of Maytag-built side-by-side refrigerators are relatively simple to replace. Follow these steps:
  • These eight inch long filters are housed in their own compartment. The base of the compartment can be released by pushing in on the release clip found at the end of the housing unit. Allow the base of the housing compartment to hang down while you remove and replace your filter.


  • Twist the spent filter to the left (counter-clockwise) and gently pull on it to remove it. There is an automatic water shut off to keep leaks and spills to a minimum.


  • Remove the new filter from its packaging. Remove the plastic wrap, and peel off the aluminum topping. Insert the new filter into the housing unit. Twist the filter to the right (clockwise) until it clicks into place. Replace the base of the filter housing by cliping it back in place.


  • Condition the filter by dispensing several glasses of water through your refrigerator. This ensures that all fine carbon particles have been removed.


  • Check the filter and the inside of the refrigerator for leaks. If you find a leak, remove and install the filter again.


  • Finally, reset the 'change filter' indicator light, if your refrigerator has one, at the front of your refrigerator. The procedure for resetting the change filter indicator light can vary from fridge to fridge. Typically, the indicator light can be reset by holding down on the 'lock' button and the 'water' button simultaneously for three seconds. Sometimes, it is the 'lock' and the 'light' button you need to press down on simultaneously for three seconds in order to reset the filter indicator light.


Removing and replacing a water filter - center ceiling location

Filters situated in the center ceiling of the refrigerator compartment of Maytag-built side-by-side refrigerators are relatively simple to replace. Follow these steps:
  • Turn the filter a quarter turn to the left, in a counter-clockwise motion. The 'unlocked' symbol on the filter will be lined up with the indicator line that is molded into the refrigerator just above the filter. Allow the ears of the cartridge to disengage from the filter holder.


  • Gently pull down on the filter, being careful to not spill any water still in the filter. Discard the used filter.


  • Remove the new filter from its packaging. Remove and discard the red plastic cap found on the top of the new filter.


  • Apply the appropriate month sticker to the filter to remind your self to remove and replace the filter in six months' time.


  • Insert the new filter into the filter opening. Line the 'unlock' symbol on the filter up with the indicator line that is molded into the refrigerator above the filter. Turn the filter a quarter turn to the right, in a clockwise motion. You will be able to feel the filter stop when it is all the way in, and the 'locked' symbol on the filter will now be lined up with the indicator line above the filter.


  • Close the refrigerator door and dispense several glasses of water through the water dispenser in the door in order to purge the new filter of any impurities. Open the refrigerator door again and check for leaks. If you find a leak, remove and replace the new filter again.


  • Finally, reset the 'change filter' indicator light, if your refrigerator has one, at the front of your refrigerator. The procedure for resetting the change filter indicator light can vary from fridge to fridge. Typically, the indicator light can be reset by holding down on the 'lock' button and the 'water' button simultaneously for three seconds. Sometimes, it is the 'lock' and the 'light' button you need to press down on simultaneously for three seconds in order to reset the filter indicator light.


Nov 29, 2010 | Maytag MFI2568AES Stainless Steel Bottom...

1 Answer

I have a Maytag side by side with water/ice dispenser in door and filter for water. I changed the filter upon moving into house in June. The change filter light came on a few weeks ago and I can't get it...


I have a Maytag side by side with water/ice dispenser in door and filter for water. I changed the filter upon moving into house the change filter light came on and I can't get it to go off. How do I reset the change filter light (it's not time to change the filter)? The model # is MSD2732GRW and I don't have a manual for this refrigerator. Thanks!!

Sep 07, 2010 | Maytag Refrigerators

1 Answer

I have a ED5PHEXRQ00 refrigerator. The red light


Your filter is located in the grill of the refrigerator (below your doors) and has a small plastic "handle" or "knob" on it. Turn the handle counter clockwise so that the line of the handle points up and down and pull out the filter. Save the handle to slide onto the new filter. I also believe that you will need to press the light switch in the refrigerator five or six times to re-set the filter status.
Filter is part number 4396710
Good luck!

Jun 27, 2010 | Whirlpool Refrigerators

1 Answer

We have changed the filter, but the red light saying that it needs changing is still on. How do you get the red light off? thanks.


Check you manual for a reset procedure; they often require a button sequence to reset error modes. The sensor or timer knows when to change the filter but doesn't know if it was actually done.

May 24, 2010 | Amana ARS2464B Side by Side Refrigerator

1 Answer

Change filter light


Water Filter Status Indicator
Light (select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the Lock and Water
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.
Sea Breeze

Nov 25, 2009 | Maytag MSD2650H Side by Side Refrigerator

2 Answers

Can't identify "water filter indicator light"


the indicator light could be on the control panel inside the refr section if your controls are there, or it is most likely on the front of the dispenser panel. it only comes on when you draw water from the dispenser and thats when you will see it be green, filter ok, yellow, filter at 80% life, or red, time to replace the water filter.
also you dont need to shut off the water when changing the filter as it is made with a shut off device in the filter housing already and is automatic.
by the way filters are expensive, go online and check prices. google "water filters" and find a good price.

Dec 13, 2008 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

1 Answer

Filter light still on "Red"


try holding ice type and child lock together for 3 seconds that worked on mine

Mar 30, 2007 | Maytag MSD2454G Side by Side Refrigerator

Not finding what you are looking for?
Whirlpool Gold White-on-White 21.9 cu. ft. Conquest Side-By-Side Refrigerator with Ice and Water GD2SHAXLQ Side by Side Refrigerator Logo

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4066 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Whirlpool Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...