Question about Riso Office Equipment & Supplies

Open Question

Error E 06 on Risograph CR 1610 Can I fix this myself or does it need service engineer ?

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 76 Answers

SOURCE: Risograph CR 1610

Can you please tell me how to get a cr1610 service manual and parts list.

Thank You

morné

durandt@2blink.co.za

Posted on Oct 06, 2009

  • 76 Answers

SOURCE: problem of C25 risograph cr 1610

Remove the old mater on drum and clean your master incoder strip and sensor. Look also at your drum clamp and bend the 2 sides of the 2 arms a bit up that goes under the clamp unit so that it can open a bit wider. let me know if you still struggling.

Posted on Oct 08, 2009

blueextc3221
  • 15935 Answers

SOURCE: RISOGRAPH CR 1610

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Aug 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Riso cr 1610 error code E-22


The E error code indicates that it is a logic or electronic failure and will requires a service person to service it. Sorry I couldn't locate anything more helpful.
Have a great day.

Jul 08, 2011 | Office Equipment & Supplies

1 Answer

RISOGRAPH (RISO) - Service-Manual


my Risograph CR-1630 AW, error 5. what can i do?

Jul 29, 2010 | Computers & Internet

3 Answers

Error E16 RISOGRAPH CR1610


E16 indicates a motor lock with the inking motor. Disassemble the ink pump unit and check for proper rotation of the inking motor itself. This error is caused by a current overload.
Also, remember to try powering on the machine while holding down the reset key to clear all error codes first.

Feb 13, 2010 | Sharp AL 1631 Copier

1 Answer

RISOGRAPH CR 1610


Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Sep 25, 2009 | Riso RZ220 Duplicator

5 Answers

What does the error code E 01 stand for?risograph 4050


If its CR or TR, E-01 is main motor lock. turn off machine and hold reset button in while you turn the machine on again. Make sure your master removal unit and master feed unit are closed corectly.

Apr 07, 2009 | Riso RZ220 Duplicator

1 Answer

Riso cr 1610


You will have to select corect machine model in service mode 200 , nomaly it is d but you will have to select between 1 and f to find the corect setting or just make sure that your cable is connected corectly

Nov 12, 2008 | Riso RZ220 Duplicator

3 Answers

Risograph CR 1610


Risograph C1610 Error E 78 - Problem was fixed by re attaching the detached cable inside the top scanner. you have to take apart the scanner on top and re attache the cable and that should get rid of the error

Aug 06, 2008 | Office Equipment & Supplies

1 Answer

Problem of C25 risograph cr 1610


Remove the old mater on drum and clean your master incoder strip and sensor. Look also at your drum clamp and bend the 2 sides of the 2 arms a bit up that goes under the clamp unit so that it can open a bit wider. let me know if you still struggling.

Jul 01, 2008 | Office Equipment & Supplies

1 Answer

Risograph 5800 repair


This is a cutter moter lock. you would have to replace the cutter unit.

Nov 10, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Riso Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Marius Chiriac

Level 2 Expert

231 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you a Riso Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...