Question about Gorenje K357 / 2 Bottom Freezer Refrigerator

1 Answer

Error code "E2" of Gorenje K357

Hello,

since two weeks, the lower display of my Gorenje K357 show the error code "E2". Surprisingly, sometimes the error code occures, stays for some days and then is gone again for some days. After some days, the error occures again.

Does somebody know which type of failures are behind this error code "E2" in Goreneje K357?

Thanks in advance!

Posted by on

  • Stefan Augustin Oct 09, 2011

    Hey, that sounds like it will be worth and not too exensive to repair it.
    Thank you very much!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

E2 - reporting a problem with the sensor of the evaporator in the refrigerator / in isolation Error code

Posted on Oct 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the door switch


Hello.

Some Washer ranges are equipped with electronic displays that indicate the time of day and the oven's temperature when it's in use. The display also alerts users to error codes including PF, or power failure, and various letter and number combinations that correspond to issues ranging from electronic control malfunctions to problems with the oven door latch.
Related Searches:

F2 Faults

Washer F2 faults relate to temperature problems in the oven. In the case of the error E2-F3, F2 is the general fault code and E2 is the specific error code. An E0-F2 error indicates that the oven's temperature sensor is open; E1-F2, that the temperature sensor is shorted; E2-F3, that the oven temperature has exceeded the maximum rated 575 degrees Fahrenheit in "Cook" mode; and E2-F3, that the oven temperature has exceeded the maximum rated 950 degrees Fahrenheit in "Clean" mode.

Clear Error Code

If your oven display shows a letter/number combination, washer advises clearing the display. Press "UPPER OFF" or "LOWER OFF" on double oven models. On single oven models, press "OFF/CANCEL" to clear the display. If the code reappears, the manufacturer recommends contacting a professional service technician or contacting the Washer producer

Professional Service

The Tech Sheet included with Whirlpool ovens is meant for use by professional technicians servicing the unit. To address an E2 F3 error, a technician can check the oven's temperature sensor connection, measure the sensor's resistance and, if necessary, replace the sensor.

Thanks.

Dec 07, 2011 | Washing Machines

1 Answer

Dryer will not start display works, when i push the start button it just beeps and does nothing, shows a E01 code.


Hi, this is what the error code means,

E1 or E2 Thermistor Failure The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display.

Normal thermistor resistance values:
60 degrees F. - 15.3K ohms.
70 degrees F. - 11.9K ohms.
80 degrees F. - 9.2K ohms.
Hope it helps.

Jan 19, 2011 | Whirlpool GEW9250 Electric Dryer

5 Answers

E1 and E4 error code desplay on the screen induction cooker. what is the fault in the induction cooker?


E0 error - ensure pot or pan is placed correctly
E1 error - the circuit has malfunctioned
E2 error - the temperature sensor is opening circuit or short circuit
E3 error - the voltage is higher (140 - 160V) for 3 seconds
E4 error - the voltage is lower (80 - 100V) for 3 seconds
E5 error - the cooktop surface temperature is too high
E6 error - Internal electronic temperature is higher than normal for 3 seconds
E7 error - Internal electronic temperature sensor is opening circuit or short circuit

Dec 12, 2010 | Stoves Heating & Cooling

2 Answers

E2 intermitent


Hi,
E2 error code means the evaporator sensor is fault.
This needs to be checked against a temp/resistance chart which may require the PCB to be replaced.Only service professional can test it.You need the device for testing it.

post a comment for further assistance.
Thank you for using fixya have a nice day:-)

Sep 18, 2010 | Gorenje K357 / 2 Bottom Freezer...

1 Answer

E-1 CODE


Hello there
This code can sometimes be the e-1 or sometimes the e-2 here is the descrioption of what it means
E1 or E2 Thermistor Failure The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display.

Normal thermistor resistance values:
60 degrees F. - 15.3K ohms.
70 degrees F. - 11.9K ohms.
80 degrees F. - 9.2K ohms.Dryer thermistor assembly
f2e3f51.jpg

Jul 27, 2010 | Whirlpool GEW9200L Electric Dryer

2 Answers

Error code E2 A.C. AUX


Disply E2 error Coming

Jul 23, 2010 | Heating & Cooling

1 Answer

E2 error codes shows on my Pro Form 730 si treadmill


Did you find a solution for this issue? I have a similar situation

Sep 28, 2009 | Exercise & Fitness

1 Answer

I am getting an E2 error on the display. The


either any of the key(button)is got stuck up prtessed or the motor of the washer is got weak.due to this e2 error code shows up.the washer works if the motor is weak but if there are more clothes in the washer and due to that motor cannot spin properly so it shows e2.First clean the washer internally after emptying it completely then check.if still e2 error then motor needs replacement . you can get new motor at www.repairclinic.com

Aug 30, 2009 | Amana Washing Machines

1 Answer

Whirlpool Oven Model RF365PXGN getting a error of F1 and E2


HELLO, I HAD THE SAME PROBLEM. ALL YOU HAVE TO DO IS FIND YOUR CIRCUIT BREAKER BOX AND LOOK IN IT FOR THE BUTTON THAT SAYS KITCHEN. TURN THE KITCHEN POWER OFF FOR 30 MINUTES THEN TURN IT BACK ON. ONCE YOU TURN IT BACK ON THE OVEN SHOULD RESET ITS SELF. TRY THAT AND IT SHOULD HELP.

Oct 31, 2008 | Ovens

1 Answer

Error codes


Hello raco1
Welcome


I need your model number to look up the fault code !!!!
You said , you see fault codes, FD F3 and E2 F3 is showing up on display pane


Looks like this may be your problem
F3 - E2 - Oven to hot -Replace oven temperature sensor


Waiting for your response.
When responding send me this whole communication . Not just your answer!
Thank you Huuum.

Oct 03, 2008 | Whirlpool RBD305PD Electric Double Oven

Not finding what you are looking for?
Gorenje K357 / 2 Bottom Freezer Refrigerator Logo

Related Topics:

5,949 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gorenje Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Brian Coughlan

Level 2 Expert

275 Answers

Are you a Gorenje Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...