Question about Televison & Video

3 Answers

Hi Got a Symphonic VHS Model#SE426G need the code for this device, to hock up to my new TV thank you ( Tweetyc@myifp.com ) hope that you can help me .

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Are you referring to wiring/connecting the VHS to the TV - Most VHS would be a straightforward connection from it Video OUT to the TV's Video IN. Alternately if available, you can use the RF OUT of the VHS towards the ANT/RF/CABLE IN of the TV.

Or are you referring to using your TV's remote to likewise control the VHS? If yes, you need to specify what remote it is and/or the make & model of your TV.

Hope this be of initial help/idea. Pls post back as requested or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Apr 09, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers

Hi friend

u can bye the code froem ur nearest electroinc or electrical store get the sample he will gave u same of taht type its cahrge for it $5 to 20$

thnx using fixya

Posted on Apr 09, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers
  • Ginko
    Ginko Apr 09, 2008

    Try also Symphonic 064, 076, 015.
    It depends also on your tv remote, which is tv model?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I can play DVD's but not VHS tapes. I hav checked all connections and several tapes to no avail. Thank you ! Ol' Fred


Hey Ol' Fred...
One of my good friends is an ol Fred so I felt compelled to stop in and help!
I'm not sure of your setup, but if you've got a combo DVD/VHS unit, make sure that you have out puts to the TV for Both parts separately... You can designate by accessing the TV's onscreen menu and setting up a separate source for DVD and one for VHS. I've found on my projection TV that it's best to use the Coax cable connections for the VHS to TV.
Then once it's setup with separate hookups to the Tv, you should have audio and video for VHS...
k

Dec 18, 2009 | Televison & Video

4 Answers

A Magnavox TV was purchased by my sister at WalMart a couple of months ago. The Model Number is CT270MW8A. My sister and I are unable to get any Code we find in instructions/guides to program a Direct TV...


The following code is the most popular for your brand. 10054
Setup Instructions
  • Set the "Mode Switch" to TV.
  • Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
  • Enter the 5 digit Code above.
  • Try your new code and tell us how it worked!
  • Jul 10, 2008 | Televison & Video

    1 Answer

    No owners manual can't get new blue ray dvd player to work on tv


    Here is the manual:
    http://www.hdtvsolutions.com/pdf/JVG%20HD52G56G.pdf

    When using the HDMI connections you may have to tell the DVD to output to that port.  Also you may have to connect additional sound cables from the DVD output to the TV.

    Jun 02, 2009 | JVC HD-52G786 52" Rear Projection HDTV

    1 Answer

    Need code(s) for Symphonic TV


    Sympohonic codes are 0180, and 0171. You can also dowload this manual by this link:
    http://www.replacementremotes.com/store/productdetailp.cfm?productid=56344

    I hope that I have provided the correct information that will assist you in the resolution of this issue. If you have any questions, please post back with a comment to this thread.
    If I have helped you with your question and/or solved the problem, please take just a moment to rate this post. Thank you!

    May 01, 2009 | Televison & Video

    5 Answers

    I am trying to find a universal remote code to control the new Zenith digital tv tuner converter box. The model # is DTT900. It is for a person with low vision who cannot see the buttons on the remote...


    Hi,

    Pls post back with the brand and model of the universal (replacement) Remote Control or what remote control you would want to use with the Zenith DTT900 Digital-to-Analog Converter Box.

    Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

    Good luck and kind regards. Thank you for using FixYa.

    Oct 23, 2008 | Televison & Video

    1 Answer

    Need a code for a total control 4 universal remote to work with a Dual DVRW-5002 DVD-VHS combo player


    You can find the remote control codes for different brands of devices from
    http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

    If none of the codes work then we have two other solutions:

    1. Searching For Your Code

    If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
    If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
    1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
    2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
    3. ENTER 9-9-1 (two blinks on the remote)
    4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
      Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
    5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

    2. Learn the buttons from the original

    Line up your original remote and the head-to-head before completing the following steps.
    1. PRESS and HOLD the SETUP button until the red LED flashes twice.
    2. PRESS 9 - 7 - 5, the red LED will flash twice.
    3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
    4. PRESS the button that will receive the learned function, the LED will flash rapidly.
    5. PRESS the button on the original remote to be learned.

    Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
    To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

    More help for programming your remote can be found here:
    http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

    Hope that helps! Should you have any further questions, please feel free to post them here.

    P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

    Thank you for using FIXYA!

    Cheers!
    IrishDruid

    May 22, 2008 | Televison & Video

    1 Answer

    I need to find a code that will work with my Jumbo Universal remote and my Symphonic TV model # st4819. I have tried the ones in the book that came with the remote and also did the auto code finder too....


    You can find the remote control codes for difrent brands of devices from
    http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

    If none of the codes work then we have two other solutions:

    1. Searching For Your Code

    If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
    If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
    1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
    2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
    3. ENTER 9-9-1 (two blinks on the remote)
    4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
      Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
    5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

    2. Learn the buttons from the original

    Line up your original remote and the head-to-head before completing the following steps.
    1. PRESS and HOLD the SETUP button until the red LED flashes twice.
    2. PRESS 9 - 7 - 5, the red LED will flash twice.
    3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
    4. PRESS the button that will receive the learned function, the LED will flash rapidly.
    5. PRESS the button on the original remote to be learned.

    Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
    To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

    More help for programming your remote can be found here:
    http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

    Hope that helps! Should you have any further questions, please feel free to post them here.

    P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
    If it hasn’t, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

    Thank you for using FIXYA!

    Cheers!
    IrishDruid

    May 02, 2008 | Televison & Video

    7 Answers

    Living solutions remote control codes


    I have a Universal Remote Control Model ATC-1311 Giant remote. I have lost the codes to and instuction book to. Can you tell me where to get at least the code for my T>V> Thank you

    Mar 29, 2008 | Televison & Video

    1 Answer

    Universal Remote Control


    What is the model number of your phillips remote

    Mar 16, 2008 | Televison & Video

    Not finding what you are looking for?
    Televison & Video Logo

    Related Topics:

    47 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    69736 Answers

    Electro Med Services...
    Electro Med Services...

    Level 3 Expert

    6370 Answers

    yadayada
    yadayada

    Level 3 Expert

    63661 Answers

    Are you a Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...