Question about Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

1 Answer

F1 fault both draws on dishwasher are constantly on and dishwasher is showing F1 fault???

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Fisher and P... Master
  • 713 Answers

Hi . F1 means your machine has triggered the flood alarm. either you have a leak on one of your drawers or water or soap suds has escaped throe the overflow. now the 1st thing to do is turn your machine off at the wall. then leave it for a couple of days to let it dry out. then turn it on and try the lower drawer throe a cycle,if it doesn't go to F1 then try the top drawer. if it doesn't go to F1 then it might be fixed.if it does go to F1 on any drawer then please reply and tell me which drawer it is and i can help you further.

Posted on Jun 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WSF6606X+stainless Steele dishwashers showing Fault F1 what does it mean?


WSF6606X+stainless Steele dishwashers showing Fault F1 what does it mean?

overflow prevention
9_22_2017_3_02_40_am.png

Sep 22, 2017 | Dishwashers

1 Answer

What does an F1 erroor message mean. I have a


F1 means "flood. there is a flood sensor underneath the drawer, and if there is any water under the drawer the control will show that error. Check the drain hose linkage for cracks. Remove drawer and dry the area underneath.

Jul 14, 2010 | Fisher and Paykel 24 in. DS-603 Built-in...

1 Answer

I have a single draw Fisher and Paykel dishwasher. I stupidly put washing up liquid in the dishwasher which resulted in a F1 problem. Water started leaking under the draw and onto my floor. I turned the...


ok , F1 means your flood switch has activated, which is underneath the drawer. now they show the F1 fault because of 2 reasons.1st there is still water underneath drawer causing switch to activate. 2nd your activator board which has the flood switch attached is faulty reading your posting it has been about 15 days since the fault happened. the water should have dryed around switch by now. if there is power to the unit and it is still coming up with F1 fault then possibly you have damaged the activator board. please reply and tell me if you have power on or off at the present time. to fix the problem it is alittle bit involved but i can guide you thru it when you reply .good luck

Apr 23, 2010 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

With a DD603 d/washer , the F1 sign flicks once the w/cycle ends


F1 is a fault that occours when a waterleak is detected if oyou rmeoveth elower drawe there shoudl be a trouble shooting guide taped to teh back wall inside,very helpful

Jan 25, 2009 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

Dishwasher error


The error was a flood fault, water was not draining from either of the drawere, I removed the bottom drawer, dried drip pan and used hairdryer to dry fault sensor, the dishwasher then reset itself and works fine.

Dec 31, 2008 | Fisher DS603W / DS603B / DS603I Dishwasher

2 Answers

RE: Fischer paykal F1 code


F1 fault means the flood switch on the base of the dishwashers has been activated.
nine times out of ten its the lid motors.
You can remove the two kick plates on the bottom of the dishwasher.
Dry out the water in the base with a sponge.
only one draw will be leaking water??
This allows you to use the second draw until a serviceman shows up.
Dry the base out A.S.A.P, because you have a electronic board that sits on the base. cheers

Aug 04, 2008 | Fisher DD603FCSS Dishwasher

2 Answers

I'm Not sure of the model number, Fisher & Paykell double draw dishwasher


My dishwasher's doing exactly the same thing. What was the solution?

Apr 30, 2008 | Fisher DD603FCSS Dishwasher

1 Answer

Fisher Pykel draw dishwasher has F1 on both draws


my fihser dishwasher is showing f2 and not draining

Apr 25, 2008 | Dishwashers

2 Answers

Clearing F1 Fault


Hi, Dexters Dad,

I cannot help you without the make and model of your dishwasher. Please provide this by posting a comment here. I should get a email from Fixya telling me you posted the comment. Thankyou and looking forward to helping you get rid of the F1 error code.

Nov 23, 2007 | Dishwashers

Not finding what you are looking for?
Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher Logo

Related Topics:

631 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Brian Coughlan

Level 2 Expert

275 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Fisher and Paykel Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...