Question about Uniden BCT7 Base Scanner

1 Answer

Trying to find an internal speaker for my BCT7 I know this product has been discontinued I called Uniden and they were kind of snobby Where can I find one or are some of the other uniden scanner speakers the same to fit my scanner

Posted by on

  • jsascuba Nov 28, 2010

    I had the same problem The internal speaker for the BCT15 is the same. its the same speaker

  • jsascuba Nov 28, 2010

    In addition to my previous note , I looked back in my email
    It is Item # BSPY0445001



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,274 Answers

I had one like that, could not find a replacement for, so i got one out of a junk radio and made it work, as long as it did not touch any thing and cause a short. As long as I got one screw in it was fine..worked great....hope this was helpful...

Posted on Jun 03, 2010

  • JOHN BABA Jun 03, 2010

    jsascuba,....i dont know if you want to go this way or not, but you can go to Radio Shack or some place like that and just get you a external - PA speaker and plug it in the jack and it will do a lot of time....



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need to know how to program this thing I have no Idea what I'm doing it is a uniden bear tracker800 BCT7

The best programming instructions are in the factory manual that you can download and print, at no cost, here:

Bill B.
Listening in since the 60's

May 25, 2011 | Uniden BCT7 Base Scanner

1 Answer

Remote control does not work where can i get a new one

Hi jb,
You can call Audio Products International direct at 416-321-6211 and order one.
There is a repair centre in Toronto, Ontario that replaces remotes for the Spherex XBOX 5.1 and also does repairs. It is called "All-in-one Electronics" and it's number is 416-789-0668.
I read that the sound system you have has been discontinued, so this may not be an easy fix. Hope one of the places above can help you.

Dec 28, 2010 | Spherex Xbox 5.1 Surround Sound System...

2 Answers

BCT7 looses programing when power loss occurs whenever the unit is powered on. The unit does not loose programing when the unit is powered off. What gives?

I had the same problem with my BCT7, and after a little research, found this memory backup cap as the problem. It is located next to a transformer near where the 12vdc plugs into the circuit board (the cap is only about a 1/4" tall).
You can get one cheap from the following dealer:

0.047F .047F .047 Farad 5.5V Memory BackUp Capacitors EECFSR5V473

Nov 25, 2010 | Uniden BCT7 Base Scanner

1 Answer

Need manual for bct7 scanner. Don't remember how to program

You can download and print your manual, free of charge, here:

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:

Bill B

Aug 09, 2010 | Uniden BCT7 Base Scanner

1 Answer

Owners manual for a BCT-7

You can download the manual for the BCT-7 at
Please rate this solution. Thanks.

Feb 16, 2010 | Uniden Radio Communications

2 Answers

The visual ringer keeps flashing on my uniden cordless phone



Feb 10, 2010 | Uniden Cordless Phone

1 Answer

I want to unblock my uniden bct7 scanner, Can anybody tell me how

The BCT-7 covers popular frequency bands, skipping things like television signals, non-voice (data) bands, and banned (cellular) bands. It cannot be modified to receive other frequencies. Need the manual for your scanner? You can download/print it here:

For a comprehensive database of active frequencies in your area, visit:

Apr 04, 2009 | Uniden BCT7 Base Scanner

1 Answer

Map updates for Uniden GNS 8365

Called Uniden almost 12 months ago to be told they were going to provide updates in one month. They never did, I called back and was told they would then be available by June 2008. They never were. Their site now shows the GNS8365 as a Discontinued Product and no further info available. Good marketing ploy to get you to spend money on another up to date product. I bought a Tom Tom instead.

Dec 30, 2008 | GPS

1 Answer


you can't it's all ready programed

Oct 01, 2008 | Uniden Radio Communications

1 Answer

Uniden Mystic

Because the supplier for the lcd screen went belly up and it was not enough of a seller for Uniden to want to redesign it, so I was told by Uniden.

Aug 22, 2007 | Uniden Mystic GPS Receiver

Not finding what you are looking for?
Uniden BCT7 Base Scanner Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts


Level 2 Expert

211 Answers


Level 3 Expert

3289 Answers


Level 3 Expert

1654 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides