Question about Kenmore Elite 45986 Front Load Washer

1 Answer

My Kenmore elite 40512900 stays at 7 minutes

My Kenmore elite 40512900 stays at 7 minute. It counts down to 7 minutes then keeps running but wont go past 7 minutes PLease help

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

Well often when it hits the last ten min of a cycle it is trying to drian more times then not it isnt or it hasnt senced it has drianed so odds are that your drian pump not drianing or you have a bad pressure switch. i would start with the drain pump often it has a filter that get clogged and can be gottin to from the front

Posted on Jun 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a front loader washer Kenmore Elite Model #796.40311900 that spins SLOW, not FAST as it should on spin. The digital readout works normally.


sounds like maybe drain filter is plugged and unit is not draining fast enough. if you have drain access in front pull it out and clean it.

May 08, 2017 | Kenmore Washing Machines

1 Answer

Have a Kenmore Elite Side by Side and there is water running down the side of the fridge which appears to be coming from the water filter. Already changed it twice.


Did you flush the system after changing the filter? Air can cause water to leak if it not flushed after each filter change. It takes about 6 to 7 minutes to get all the air flushed out. I hope that helps...

Nov 12, 2014 | Kenmore Elite Side By Side Refrigerator -...

1 Answer

My dryer timer counts down to 7 minutes and then continues drying


replace the sensa board and make sure the wires on the sensors are ok

Jun 07, 2010 | Whirlpool GEW9250 Electric Dryer

1 Answer

Model # 11061082000 electric dryer....elite kenmore


you can't get any parts for this dryer the computer board is no longer available,must be old technology replace it.

Dec 28, 2017 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Elite QuietPak 9 Dryer - door opens constantly


I'm not solving the problem, but just wanted to say I have the same problem for the same dryer

Aug 04, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

Display is stuck and 7 minutes and won't reset on Kenmore Elite


Remove from power for sometime to reset and try again.

Dec 15, 2017 | Washing Machines

1 Answer

Dries clothes but runs too long & clothes VERY hot


Fixable and possibly a warranty claim. The timer is bad. You will need to get behind the control panel and remove the timer and replace the timer. First I would call whoever it is that yall bought the dryer through and see how long your warranty is. Most of the warranties are only 1 year. But if you bought a extended warranty then you are covered. The part can be found at repairclinic.com

Feb 17, 2009 | Kenmore Elite HE4 Electric Dryer

2 Answers

Kenmore Elite Dishwasher clean light ind flashing and won't start


You will have to reset the console. To do this, close the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry

...all the lights will turn on briefly and the machine will start a diagnostic cycle. You can press cancel or let the diagnostic cyle finish (1-2 minutes).
You should now be able to run the dishwasher as normal.

Feb 17, 2009 | Kenmore 24 in. 15142 Built-in Dishwasher

1 Answer

Control pad is flashing and can't seem to reset tempeature


try unplugging the unit and waiting 9 minutes then plugging it back in.

Dec 26, 2008 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2696 Answers

fordexpert

Level 3 Expert

5677 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

2005 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...