Question about Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

1 Answer

Whirlpool DU1055XTSS Quiet Partner 1 is not cleaning top rack

I have a Whirlpool Quiet Partner 1. Model #DU1055XTSS purchased Nov. of 2007. For about the past 3 or 4 months the top rack is not getting clean. It seems as if there is no water getting to the top rack. At the end of the cycle, there are water droplets on the roof of the machine, but the top rack dishes are dry and still dirty. Bottom rack cleans great. Can you please tell me how to try to fix this problem?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The sprayer is clogged with ****. I had the exact same problem. my mother-in-law gave me of some 80 year old man that has fixed appliances all his life. Ten minuets after he got to the house it was fixed. cost $70.00. He just took a couple things apart dumped out the **** inside the parts and put it back together. Hope this helps.

Posted on Jan 07, 2011

  • bigguy_121 Jan 07, 2011

    not sure why they starred out what I said, it wasn't anything bad enough to be censored (in my opinion)

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Whirlpool Quiet Partner II does not clean the upper rack of dishes properly. They are greasy. I have checked the top spray arm for blockages. There were none. I am fairly certain that water is


Make sure the center loading is not obstructing the water jet to the top shelf. Top shelf is only for glasses and saucers , use Jet-Dry .Pre rinse and clean bottom pan strainer from dirt debris.

May 14, 2012 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

I have a whirlpool gold dishwasher model Quiet Partner 3. The top rack is not cleaning the dishes very well. We live in the country and have hard water. I am wondering if there could be a buildup of some...


if it is just affecting the upper rack i doubt it is just a plugged spray arm (though i could be wrong). more likely than not you have a blockage on the intake of your spray pump motor. a series of bones, toothpicks, foreign material, etc could be blocking the entrance of the pump causing it to starve for water so to speak.
you will more than likely need to remove the lower rack and spray arm to be able to disassemble the strainer and gain access to the sump.
a complete model number would help bunches to.. alas

May 20, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Quiet partner 1 top rack does not get clean at all


Hi,

I would suspect you have debris in the pump that is causing a pressure drop so the water is not spraying well in the upper arm.

Try this procedure to clean out the sump. Let me know if it helps.

http://www.fixya.com/support/r4628450-poor_cleaning_or_noisy_pump_whirlpool_or

Apr 24, 2010 | Whirlpool 24 in. DU1055XTPS Stainless...

1 Answer

Our Whirlpool Quiet Partner III cleans the bottom rack fine, but the top rack does not seem to have any water pressure and thereby does not clean. Any solutions?


two things that you need to check one is the water level in the machine when it has completed it fill cycle.low water level will cause this issue with imporper cleaning.
make sure the spray arm is not clogged in any way.
the other is simply replace the main wash motor

Mar 09, 2010 | Dishwashers

1 Answer

Whirlpool dishwasher quiet partner 1 top arm is not rotating?


I have same problem, anybody know how to fix this?

Feb 10, 2010 | Whirlpool Dishwashers

2 Answers

Whirlpool du1055xtsq 3 not cleaning top rack of


In my experience, you probably have a clog in the spray arm/arms for the top rack. Take the arm(s) out and see if the holes in them are clogged. Rice, plastic wrappers, and glass from dishes that broke in there are the most common culprits I've seen.

Nov 25, 2009 | Whirlpool Dishwashers

1 Answer

I have a Whirlpool Quiet Partner II model DU1100XTPQ7. The top rack is not clean after the dishwasher runs. We cleaned both sprayers with pipe cleaner & ran water through the lower sprayer with a...


Hello Tx_smiths! We are terribly sorry to hear of your concern with your Whirlpool Dishwasher. Please respond back to this email address Whirlpool_Reviews@Whirlpool.com with your name, reviewer name (Tx_smiths), phone number, street address, zip code, model & serial number, and date of purchase on the appliance. We would be happy to assist you. We look forward to your reply.

Jun 19, 2017 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool dishwasher top spinner and top rack spinner is not putting out water or very little and not spinning. I have taken apart and cleaned everything including the sump / chopper, can't find any...


First, confirm that the holes are not blocked on these arms. (I did not want to assume you have done this.)

Then check the impeller on top of the motor stem for being loose or worn/damaged - to rule the impeller out. If it is fine, then the motor is failing and too weak to drive the spray arms.
To answer your question, I think the answer is "They don't make them like they used too!"

Sep 12, 2009 | Whirlpool 24 in. DU1055XTP Built-in...

1 Answer

I have the Whirlpool Quiet (??) Partner II. My


Have this same problem with my Whirlpool DU1145XTBA. Found out that when you start the unit, it fills with water. If the water does not rise above the filter mesh in the bottom center of the unit then the pump doesn't have enough water to supply pressure to the upper sprayer. Had to replace the Flow Meter. It tells the unit how much water to supply to the unit.

Apr 12, 2009 | Dishwashers

Not finding what you are looking for?
Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher Logo

1,131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4340 Answers

Owen Barnes

Level 3 Expert

867 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...