Question about HP Photosmart C6180 All-In-One InkJet Printer

1 Answer

The ink system not working

'' hp photosmart ink system if fail '' that message come in my printer what to do
rize_1@yahoo.com

Posted by on

  • Saurabh Jun 02, 2010

    May I know the error code you are getting?

  • rize_1 Jun 03, 2010

    error 0xc18a0305

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,138 Answers

Here. try to reset your printer. this will clear annoying error displayed on your printer

1. Remove all cables
2. Unplug the printer power.
3. Press and Hold down # and 6 on the keyboard.
4. Plug the power cord back in.
5. Then release the buttons....after successful boot operation, try to print.

If that did not work.. you can also try this.
1. Press/Hold down the HELP and OK button..then unplug printer..release the button
2 Press/Hold down the HELP and OK button again..then plug the printer back in. Just Press and hold down the button while you wait for the printer to turn on (it could take a minute)
3 Now release the buttons and power it back on.
4 Error message will be displayed “improper shut down”
5 Press OK to reset the printer
6. Press both HELP and OK button again to start the resetting procedure of the printer.

Now try printing again...

If you find this very helpful..please rate this solution and vote on this on the YES below....thanks..

Posted on Jun 02, 2010

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ink system failed


Here is a link to an article that give reset information that should clear the "ink system failure" error on your printer.

http://www.ccl-la.com/blog/index.php/hp-photosmart-ink-system-failure-1/

Feb 28, 2013 | HP Photosmart C5180 All-In-One InkJet...

3 Answers

0xc18a0106 error from hp 3310 printer.... ink system has failed


That error code indicates a Ink system failure error message. Ink system failed mainly caused by your cartridge spitting extra inks into the copper contacts inside the printer. All you need is to remove all cartridge, clean the copper contacts at the back of it, clean also the contacts inside the printer (cartridge slots). Insert it back in after cleaning, unplug the power cord without turning off the printer, wait for 1 min before plugging it back in. Let me know the result.

Nov 23, 2010 | HP Photosmart 3310 Printer

1 Answer

Oxc18a0101 error message ink system failure


*** Fix your HP Photosmart D7360 (Reset Code/Master Reset) ***

1- Turn off power and unplug from power source.
2- Open right side of printer (looking at the front).
3- Disconnect,by pulling gently, both white flat ribbon cables off the main circuit board.
4- Plug in power source and turn printer on. Wait till you get a error message and push "Ok".
5- Unplug power source.
6- Reconnect the flat ribbon cables by aligning and carefully pushing into the conectors on the main circuit board.
7- Plug in power source and turn printer on (Printer preparing occurred).
8- voila, the nasty error message 0xc18a0001 "Ink System has Failed" is now gone. http://www.fixya.com/support/t451942-help THIS WORKED!!! Don't throw it out try this first for: Ink system failed Error16x16_smiley-surprised.gifxc18a0101 on photosmart D7160. This is to reset the error code only,you will need to explain in more detail why you got the code and what you've done to correct it.

Jan 24, 2010 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

HP 8250 Photosmart printer that displays "system ink failure"


Try changing the ink cartridges.

If you installed the "HP Support Toolkit" software from the CD-ROM that came with the printer, use this Toolkit to "run a cleaning cycle".
It can print a "test" page, to show you which colours _do_ work, and which do _not_ work.

If all else fails, then find a qualified printer technician.

Dec 31, 2009 | HP - HP Photosmart 8250 printer

1 Answer

On HP Photosmart C5180 Error Message 0xc18a0201


call hp total care 1800 4746836
u knw i cn tell u the steps but if u do even 1 of the steps wrong ,ur printer wont work anymre so contact them
...hp technicians will be able to take care of u
thanhks

Aug 07, 2009 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Error message: ink device failure oxc18a0506


Perform the following on your printer http://www.ccl-la.com/blog/index.php/hp-photosmart-ink-system-failure-1/.

Jun 18, 2009 | HP PhotoSmart C5150 All-In-One InkJet...

2 Answers

Ink System Failure


Hi,

below is to document that i want you to follow exactly inorder to resolve your issue..

CLICK HERE ==>> DOCUMENT

Please let me know the result after following the document.

thank you so much.

adonscott

Aug 07, 2008 | HP Photosmart C6180 All-In-One InkJet...

5 Answers

HP Photosmart D7460 problem


*** Fix your HP Photosmart D7360 (Reset Code/Master Reset) ***

1- Turn off power and unplug from power source.
2- Open right side of printer (looking at the front).
3- Disconnect,by pulling gently, both white flat ribbon cables off the main circuit board.
4- Plug in power source and turn printer on. Wait till you get a error message and push "Ok".
5- Unplug power source.
6- Reconnect the flat ribbon cables by aligning and carefully pushing into the conectors on the main circuit board.
7- Plug in power source and turn printer on (Printer preparing occurred).
8- voila, the nasty error message 0xc18a0001 "Ink System has Failed" is now gone.

/Putte

May 15, 2008 | HP Photosmart D7460 Printer

Not finding what you are looking for?
HP Photosmart C6180 All-In-One InkJet Printer Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...