Question about Watches

2 Answers

RE: Tag Heuer Mercedes Benz SLR Caliber S watch; how to set time and date?

Posted by on

  • 1 more comment 
  • josier1 Jun 02, 2010

    I need assistance in how to set time and date for the model watch I have; a Tag Heuer Mercedes Benz SLR Caliber S watch.

  • josier1 Jun 02, 2010

    Need setting time and date instructions for a Tag Heuer Mercedes Benz SLR "Caliber S" watch, it's their latest model. The response I got was for the earlier model.

  • josier1 Jun 02, 2010

    Appreciate the help and thanks.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 857 Answers

Go through the link below, this is the user manuel which includes the step to set date and time.
http://ww2.tagheuer.com/_documents/manuals/EI2246_en.pdf

Posted on Jun 02, 2010

  • Jayant Jha Jun 02, 2010


    Try these steps they will help you :The crown at 3 o'clock is used to set the time and change modes. The crown at 9 o'clock is used to rotate the flange at the edge of the dial.
    The A button at approximately 2 o'clock starts and stops the chronograph function. The B button at approximately 4 o'clock resets the chronograph.

    Lap Timer: When the watch is displaying normal time, press the right side crown to switch to chrono mode (the hour hand will indicate CHRONO). This watch measures lap times, press A to start timing the first lap. Press A again to stop the first lap and automatically start timing the second lap (the hour hand will move to indicate you're on the second lap), and so on. You can measure up to 20 laps this way. When you're fininshed timing laps, press the right side crown to see the best lap time. To reset the lap timer, hold down B for 2 seconds. To switch out of chrono and see the normal time, just press the right side crown in.

    Chronongraph: To time an interval that is not a lap, just follow the above instructions, but instead of pressing A to stop the first lap, press B and the watch will show the elapsed time to the nearest 1/100th of a second. Hold B to reset.

    Crown at 9 o'clock: This crown rotates the inner flange at the edge of the dial and is used to measure total race time (i.e. the total of all the laps). Simply rotate the crown until the the little start trinagle on the flange is aligned with the minute hand. This way, the total elapsed time can be read at any time, similarly to how a rotating bezel works.

    To set the time: Ensure the watch is not in CHRONO mode, if so, press the right side crown in. At this time pull the right side crown out until you feel a click.The position the second hand moves to indicates what is currently being set. If the second hand is at 9 o'clock, you are setting am hours, press A repeatedly to set am hours. Then press B and the second hand will move to 6 o'clock, pressing A repeatedly will set the minutes. So on for year (11 o'clock), month (12 o'clock), and day (1 o'clock)



×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 679 Answers

Make sure the watch is not in chronograph mode, if it is, press the right side crown in. now pull the right side crown out until you feel a click. The position the second hand should move to indicates what is currently being set. If the second hand is at 9 o'clock, you are setting am hours, press A repeatedly to set am hours. Then press B and the second hand will move to 6 o'clock, pressing A repeatedly will set the minutes. So on for year (11 o'clock), month (12 o'clock), and day (1 o'clock).

Posted on Jun 02, 2010

  • josier1 Jun 02, 2010

    Appreciate the input but my timepiece is not behaving as you suggest. While I believe I am not in the chrono mode, when I depress the crown, the second hand moves to two minutes past the hour. If I then depress the 'A' button it will set to twelve oclock.. What then am I to do?

  • George Bill
    George Bill Jun 02, 2010

    It sounds like you are not in the proper mode. My tag, "another model" is very sensitive, just give it a little nudge, don't pull or push to hard you may be skipping right over the setting switch

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need an instruction manual for a Tag Heuer 50 Chronograph Aquaracer mens watch


Tag Heuer recognizes manuals by watch caliber number, not the watch model. Browse through my Tips and Tricks. There are few Tag Heuer watch manuals. Check out if this can help you.

Feb 24, 2011 | Watches

1 Answer

How to set day & date


mcdevito75 here, Look for any small watch repair shop in your area for this adjustment.

Jun 28, 2010 | Tag Heuer SLR Mercedes Benz Limited...

2 Answers

Tag Heuer watch runs fine; can't set time or date. What am I doing wrong?


Are you aware that the crown is threaded and it needs to be unscrewed and pulled out once to adjust time and twice to adjust date

Jul 25, 2009 | Tag Heuer 2000 Classic WK1311 wristwatch

1 Answer

The date changes at 12 in the evening


The watch is set-up for a 24 hour cycle. It sounds like your watch is 12 hours late, so if you just advance the time 12 hours ahead, everything should be solved.

May 23, 2009 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

Change the date on my TAG Watch


if it has hands the winder will be screwed in undo this anti clockwise then click it out once for date twice for time, if this helps please rate me joe

Sep 13, 2008 | Tag Heuer Watches

1 Answer

Tag Heuer Ladies Professoinal 2000


Hi Dude, it's one of those things your going to cuss once you know. Just unscrew the Bezel.Thats it. Steve 

Mar 15, 2008 | Tag Heuer cj1110.ba0576 Wristwatch

1 Answer

Just Got a tag professional ( Previously Owned)


Hard to tell without knowing what model or caliber number (usually on back). Generally, if you pull the crown (winding knob) out all the way you can set the time. Push it ONE click in, you can set the date. Check with the manufacturers website for a book of instructions you can download.

Jun 24, 2007 | Tag Heuer 2000 WK1110.BA0317 Wristwatch

Not finding what you are looking for?
Watches Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...