Question about PC Desktops

1 Answer

I WAS JUST WONDERING HOW TO PUT A PASSWORD ON A BELKIN WIRELESS G ROUTER - 2.4Ghz-802.11g BECAUSE PEOPLE ARE USING OUR WIRELESS AND ITS GOING REALLY SLOW THANKS

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 293 Answers

Goto the router configuration by typing the default gateway ip address on the internet explorer search bar. e.g 192.168.1.1
and there you can put wep and wpa key to protect your router.

Posted on Apr 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Unable to reset a Belkin Wireless N F5D8236-4v1 back to default


That is indeed strange. Holding in the reset button should definitely clear the wireless router memory. Are you sure that you're going to the right administration page to configure the router? It should be something like 192.168.1.1.

Also... by any chance are there other wireless networks nearby? I'm wondering if your computer accidentally connected to that while the wireless router was off... and now you're going to the wrong router.

If none of that works, try leaving the router unplugged for about five minutes. The volatile memory shouldn't last much longer than that.

Dec 24, 2008 | Belkin PC Desktops

1 Answer

Wish to change my password on the Belkin G Plus Nimo router and cannot remember where to go to get in and do it


1. Access the router's setup page by going to 192.168.2.1.
2. By default, there is no username and no password. Otherwise if you have created a password to access the router's page already then use that password.
3. If you want to change the administrative password of the router, go to "System Settings".
4. If you want to change the wireless security for your wireless connection, then go to wireless settings tab of the router.

Nov 07, 2008 | Belkin PC Desktops

1 Answer

How do i secure my belkin router


Acess its set up page and from there go to the wireless tab and look for wireless security. I recommend you use WPA.
TO access the set up page, take note of the default gateway under lan status and type it on the address bar. Enter the password that you have set on the router.

Aug 26, 2008 | Belkin PC Desktops

1 Answer

I am trying to set up a password for my belkin router when I go wireless


its the wireless that you need to secure. Open a browser and go to the router's IP (e.g. 192.168.1.1) If you dont know the IP, go to Start> Run . type"CMD" hit enter > type "ipconfig" hit enter, the router's IP will be Default Gateway: 192.168.X.X.

click on security in left column,
default login is blank, just hit submit

security mode= wpa-wsp (no server)
authentication= wpa-wsp wpa2-psk
encryption= tkip+aes
pre shared key = (create password)
click apply changes.
(only those who know key can use network)

Aug 11, 2008 | Belkin PC Desktops

1 Answer

We have purchased a new notebook{higrade brand vista OS} to replace a packard bell using XP the XP laptop connected no problem the newone finds the belkin router but won't connect to the internet are...


Do you have a wireless security protocol enabled, and if so, what? Install a wired connection to the router (use an ehternet cable to connect your laptop's RJ-45--looks like a wide phone plug--into one of the Belkin router's network jacks). Go to the router's management page using your web browser (probably http://192.168.2.1). If you have not previously set the password in your router, simply leave the password field blank and CLICK "Submit". If you have previously password protected your Belkin router, use the known password. If you have forgotten your password... you'll need to reset your router.
 
Reest Router: there is usually a small hole into whiuch a pin or paper clip can be inserted for this purpose or a small button to press. Most Belkins--IIRC--have the button. 

Once you are on the Belkin router's management page, look for the wireless link and set your security protocol to match what your wireless card is capable of, set the password, save and exit. Use the sasme password in configuring wireless networking in Windows.

Jul 17, 2008 | Belkin PC Desktops

1 Answer

How do i enable wep security on my belkin wireless routeron my pc & what do i do for 2 laptops


check

Setting up wireless security
Belkin : Support : Configuring Wireless Security
Enable wireless and wireless security on your Belkin ...
Generally access the router control panel panel putting router ip number on internet explorer bar. You will be asked for passwords. Check IP number and password for your model on manual.
On panel go to wireless then security, you find menus at left and top bar of the router control page in internet explorer.
Set encryption and input the password.
Do save all command (button at bottom of page).
set wep password also on wireless networked computers.


Jul 07, 2008 | Belkin PC Desktops

1 Answer

Bought a standard wireless belkin router, but have forgotten password used to access it from other computers in my home. i would like to know is there anyway i could re-set my password


If you can log into router it will let you change in there if not little hole that resets router on back press in hold power up router (keep button in) wait for 30 seconds (keep button in)and let go this should reset to default which possible on base of router or notes it came with

Jun 06, 2008 | Belkin PC Desktops

1 Answer

Cannot finish installation (Belkin F5D8633-4 wireless modem router N mimo)


ok, obvious questions first:

Do you have a different modem from TALKTALK? can you connect to the internet through that?

if so, you may not have to set a username and password for the belkin router: just connect the belkin router's internet port to the talktalk modem and let the talktalk modem handle the automatic connection.

do you know what protocol the talktalk ISP uses?  it's probably PPPOE; make certain that your belkin router is set to the correct protocol.  if you just hook it up to the talktalk modem though, you probably won't have to specificy a protocol at all.

Mar 29, 2008 | PC Desktops

1 Answer

Belkin wireless g problem


well..that passphrase is from a secure connection..you might need to get a new set of drivers, and re install that router.

go here for those drivers(look for Belkin router)

Mar 25, 2008 | PC Desktops

2 Answers

Setting up a Wireless Connection


you might want to check the www.belkin.com site to see if that can support Mac Powerbook.

Mar 09, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...