Question about Ricoh Aficio 1035 Copier

2 Answers

Sir my Ricoh 1045 machine have SC 326 problem, after taking a single copy the error code comes. please give a good solution to clear my problem. thanks

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 903 Answers

Sc326 is a laser synchronization error. The problem is usually caused by the laser sync detection board or the LD unit.

Posted on Jun 02, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 155 Answers

SC326, First of all check that the laser slitglass is still there, I've seen a couple of machines where the slitglass has been missing completely and it's been throwing up laser SCs. Remove the laser unit. Clean all the toner and dust out of it. Clean the synch sensor very carefully. If codes continue replace the LD unit. They tend to fail on these machines due to excess dusting

Posted on Sep 23, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SC392 ERROR CODE


There's a video showing how to clear SC error codes: Resetting Ricoh Savin Lanier SC Error Code There's also a discussion here: Thread Ricoh Aficio 220 error SC392

Jun 30, 2014 | Ricoh 885288 Black Copier Toner Cartridge...

1 Answer

I have an sc 326 error code in my ricoh aficio 2045 copier


kindly change the developer unit and clear the error.
the machine will respond
thank you and all the best

May 20, 2012 | Ricoh Aficio 2045e 2035e Copier...

1 Answer

Ricoh 1045 error code sc 672, 961


Controller to operation panel comucation error at start up.Check the controller stall,controller board installed correctly operation panel connectors.Enter im the service menu ,press the SP mode,open the front door,turn off the copier,unplugged the machine.Wait 10 seconds,plugged on the machine,close the front door,turn ON the copier and make a copy.

Dec 28, 2009 | Ricoh Aficio 1035 Copier

3 Answers

Ricoh 1035 laser problem


sometimes the plastic of the laser is turned by the heat proves to relax and to fit the screw that holds the laser unit that is of the side of the drum while it raises a millimeter with a screwdriver, this sometimes works.
Verifies that the glasses and mirrors well be positioned correctly.
Other

Poor connection between the laser
synchronization detector board and
the LD unit.
Laser synchronization detector board
out of position
Laser synchronization detector board
defective
LD unit defective

May 07, 2009 | Ricoh Aficio 1035 Copier

1 Answer

Error code sc 172 on ricoh aficio 2103


Hello sir; This error code is indicate video process error, may be can be reset, the procedure as follow;
press "clear mode", "107", then press and hold down "clear/stop" key for about 3 sec., until SP menu display, touch "copier sp" on screen, enter 581002 then press 1, then turn power off and back on. see what's happen. good luck !

Feb 23, 2009 | Ricoh Aficio 2022 All-In-One Laser Printer

1 Answer

What does troubleshooting code 326 of ricoh copier 1045 means?


2nd laser synchronization error. F gate 1 error. This is an optics issue. Try unplugging the machine and plugging it back it to see if the error goes away.

Nov 13, 2008 | Ricoh Aficio 1035 Copier

3 Answers

Sc 322, sc 326 codes


Never heard of this happening to five machines before.  Check the connections in the laser unit.

Oct 25, 2008 | Ricoh Aficio 1035 Copier

3 Answers

The copier is a Ricoh Afcio 350


SC 326: Laser synchronization detector board cannot receive the laser beam.
Replace the laser sync detector, Part No. A2935310.
Or try the following solution;
Open the front cover and remove the brown inner cover - 2 screws.
The black unit after the inner cover is the laser unit. There are 2 screws securing the laser unit - loosen them.
Tighten the right securing screw while jacking up the right side of the laser unit with a screwdriver.
Tighten the left securing screw and put the inner cover back on.
If SC 326 is still indicated after the above procedure, replace the laser sync detector or the whole laser unit.

Good luck and please rate me, thanks.

Apr 05, 2008 | Ricoh Aficio 450 Copier

Not finding what you are looking for?
Ricoh Aficio 1035 Copier Logo

1,250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

fares

Level 1 Expert

67 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...