Question about Panasonic PT-53WX42 53" Rear Projection Television

1 Answer

PT-53WX42 I have a Panasonic PT-53WX42 television. I am having trouble converging the blue. Any help?

Posted by on

  • bwoodwar Apr 13, 2008

    The blue will not converge, any help would be greatly appriciated.

  • Anonymous Dec 04, 2008

    I replaced mine with STK392-110 amps that I bought from bluestar electronics online. I also replaced a 2.2 ohm resistor that tested out of range and had spot damage. I still have the same issue. Colors are slanted and won't converge. Can this be due to bad IC's? I am thinking the problem may be elsewhere becasue the condition is identical after changing these parts...any ideas? Any help would be very appreciated

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 934 Answers

Need to replace the convergence amps and any 2.2 ohm resistors in the return. That unit takes two STK392-110 Sanyo amps - but for greater reliability use STK392-150's and get them, from some place like ACME to be insured their not chineese knock-offs..
Bill

Posted on Apr 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic 53" tv pt-53wx42


your convergence ic is going bad. remove front and adjust the level of blue.

Jun 01, 2009 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer

Panasonic t.v projector


you need to replace both your convergence ICs they are both STK392-110 you can get replacments at the following link with free instructions with pictures.
http://servicemanuals.vstore.ca/

Aug 02, 2008 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

Panasonic red and blue picute


you need to replace both the convergence Ics they are STK392-110 you can get new replacement ICs at the following link and they provide free instalation instructions. heres the link.
http://servicemanuals.vstore.ca/

Jun 07, 2008 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

I cannot converge the blue on my pt-53wx42


you need two STK392-110 convergence ICs. You can get new ICs at the following link and they give free installation instructions with pictures and also instant messaging with one of their techs while you do the repair. heres their link.
http://servicemanuals.vstore.ca/

Apr 13, 2008 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

Panasonic PT -47WXC43G 42 inch TV


replace the convergence amp ICs both of them. They cost about 15.00 each

Mar 09, 2008 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

Panasonic PT-53WX42


convergence IC bad
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Jan 01, 2008 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

Green horizontal deflection


Change both STK convergence IC's for reliability. They amplify/control both horiz and vertical. re-align after replacement.Locate them on the largest heat sink in your set!

Sep 26, 2007 | Panasonic PT-53WX42 53" Rear Projection...

2 Answers

CONVERGENCE ic CHIP


if you can remove the rear panel assy. look for the convergence ic's they start with stk--- and you got the part number you need a source panasonic is 814 source and the number on the ic's stk 390 ----/

Aug 22, 2007 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

Bent Image


Left rear on processor board

Oct 13, 2006 | Panasonic PT-53WX42 53" Rear Projection...

Not finding what you are looking for?
Panasonic PT-53WX42 53" Rear Projection Television Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4852 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...