Question about NetGear WGR614 Wireless Router

1 Answer

Cannot connect to 614 router

I have a desktop with the WB 311 wireless card. Upon installation, it finds the 614 router, I enter the WEB encription codes. It just continues to scan but wont connect. I have tripled cerified the encrption codes, they are all lower case), but no luck making a connection.

Posted by on

  • 1 more comment 
  • Anonymous May 01, 2008

    need assistance connecting router it will scan but do not find router both netgear usb adapter and router

  • Raymond Roque
    Raymond Roque May 11, 2010

    where did you get your encryption code?

  • Mark Kessler May 11, 2010

    What brand is your router? Netgear or D-link?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 77 Answers

Hi Crockett1972!

Were you able to connect sucessfully w/o any wireless security? If No, then try this first but if Yes then try to verify your WEP keys. You might be mistyping it at the wireless desktop with the WB311.

Hope this helps!

Posted on May 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i find the security code for a netgearwgr614 router


For finding security code of Netgear WGR 614 router follow the steps-

1. Login the Admin.
2. Click on Advanced
3. Go to the Administration
4. Click on Set password
5. Enter old password.
6. Enter New password.
7. Repeat New password.

See in images:-

find-security-code-netgearwgr614-router-ppkiuttrctilpuqmmuppyys2-2-0.jpg
Not finding security code visit:- Netgear Router Tech Support Number

Feb 13, 2015 | NetGear WGR614 Wireless Router

1 Answer

How to find encription code for 46E019 ROUTER


"encription code"? Security Key? Password? If you have the wireless secured, only you have the password. You can reset it to default settings and reconfigure the SSID and Security Key. If you supply the Make, Model of wireless device, it would be helpful.

Jan 25, 2013 | Routers

1 Answer

Have a dlink print server dpr1040 and dlink wireless router how do i print wireless


DPR-1040 information - http://www.dlink.com.au/products/?pid=777

All of this is from the manual located at link above under the resources tab.


Wireless Setup

WPS (Push Button Configuration)
WPS simplifies the process of connecting to a wireless network to a touch of a button. To use WPS you must have a WPS compatible wireless router,if you do not then you will need to manually configure the wireless connection in the web configurator (see Web Configurator below).

1. After following the hardware installation steps in section 3, ensure your wireless network is operating normally. When ready, press the WPS button located on the side of the DPR-1040. The blue LED should start flashing repeatedly.

2. Within 120 seconds, press the WPS button located on the wireless router you will be connecting to. This button may also be located in the router's web configuration pages labeled "Push Button Configuration (PBC)".

3. If successful, a wireless connection will be established between the two devices.
This connection is secure and uses automatically generated encryption keys; you do not need to remember them.

Note: If you experience problems connecting to a device, please try again. If you still experience problems, the device you're connecting to may be incompatible with the DPR-1040. Also, make sure you are connecting to a router or access point (AP).


Web Configurator

1. After following the hardware installation steps in section 3, ensure your wireless network is operating normally. When ready, type the IP address of the DPR-1040 into your browser, the default IP address is 192.168.0.10. If this does not work, use the PS-Link utility to find out the IP address.

2. Upon accessing the web configurator, click Setup > Wireless Setup.

3. On the next screen, enter the wireless network settings as provided by your network administrator.

4. Click Apply Settings, the DPR-1040 will restart and the wireless setup is complete.

Note: If your wireless connection does not work, check that you have entered the correct network settings into the Wireless Setup screen.

May 18, 2012 | D-Link DIR-412 Mobile Broadband Wireless...

1 Answer

HOW DO I FIND MY LINKSYS G2.4 ENCRIPTION KEY?


To connect to your wireless router, the router's wirelesssettings needs to be configured with the SSID, encryption etc. and also thewireless cards in all the laptops/computers needs to be configured with theserouter's wireless settings. Then the laptops/desktop computers can communicatewith your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down andput it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Mar 16, 2012 | Routers

1 Answer

Connected up the router replacing my Netgear 614 and wireless connections says can't connect to wireless network, this was a used working router, I do not have the original installation CD if i need to do...


You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.


Jun 24, 2010 | NetGear RangeMax WPN824 Router

1 Answer

How to hook up a netgear router to make computer 2 a wireless system(comp.1 is desktop and 2 is also) recently changed from dial up to a verizon wireless system but not sure how to hook it all up.


You need to install a wireless card in computer 2.
Then install the wireless driver for this card.

To connect to your wireless router, it needs the router’s wireless settings configured and also needs the wireless cards in all the laptops and or computers to be configured with the router’s wireless settings. Then the laptops and desktop computers can communicate with your wireless router.

To set-up and secure the wireless router from unauthorized access, follow these steps: -
1. Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL IP address.
3. Enter the router setup, login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WPA2 (if not then WPA).
7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router wirelessly.

Nov 26, 2009 | NetGear WGR614 Wireless Router

1 Answer

I needto encript my lyncsys wireless router


type in your browser: http://a92.168.1.1 and enter user name: admin password: admin or try another... then explore the wireless options until you can get to Wireless Encryption and choose WPA or WPA2 and type your key. this key will be entered in your laptop when you need to connect to the internet

Aug 22, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Can't find my wireless network with my desktop


open internet explorer or firefox and in the address bar enter

192.168.1.1 and press enter

then it will prompt you for a username and password

ignore the username field and enter the password as admin and click on ok or press enter.

This should take you to the configuration page.

go to the linksys site for your router here

Click on user guide - you will need adobe reader to open this so if you dont have adobe reader then you will need to install it.

Once installed you should be able to open the user guide which will walk you through how to configure the router with regards to wireless etc.

Mar 01, 2009 | Linksys WRT160N Wireless Router

1 Answer

Cant connect PC after encription


You may have a setting on the router that limits the number of authenticated wireless connections at one time. You will have to enter the web utility and check the wireless settings, particularily the security settings.

Apr 14, 2008 | Belkin (F5D7230-4) Router (587009)

2 Answers

DI-524 wireless router as wireless switch


You need to disable the DHCP server on your "slave" wireless router ( the di-524 ). In D-link routers this might be called configuring it to be an "Access point".

When this happens, connecting to the second wireless router should cause your computer to obtain an IP address which is in the range of the first router (that is to say, it will use the first router's dhcp server).

You should be able have your laptop connect with an automatic IP address and have it work.

Jan 24, 2008 | D-Link AirPlus DI-524 Wireless Router

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...