Question about Linksys WRH54G Wireless Router

1 Answer

Cannot setup my linksys wrh54g wireless router

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 177 Answers

Hi Friend,

In order to resolve the issue, please follow the steps:

If you have a cable internet connection:

1.Connect the wire (which is coming out from the modem, i.e, the internet wire)
into the WAN/Internet port of the router.
2.Connect your computer to any of the four LAN ports with a Ethernet cable(usually Blue/Yellow/Grey color wire)
3.Turn on the router
4.At the back of the Router there is a Red/Black button (Reset Button)
5.Push and Hold that button for 30 seconds.
6.Release the button and turn off the router for 30 seonds and turn it on again.
7.Type 192.168.1.1 in the address bar of the Internet Explorer and hit Enter
8.Enter the username and password (default password is admin and leave the username blank)
9.on the Setup page, make sure the Internet Connection Type is set to "Automatic Configuration-DHCP" and click Save settings.
10.Now click Wireless tab and fill the sections as mentioned:

Wireless Network Mode:Mixed
Wireless Network Name:As per your choice
Wireless Channel-6-2.437GHz
Wireless RF Control-Standard
Wireless SSID-Enabled
Wireless RF-Disable and click Save Settings

11.Now Click Wireless Security and fill the sections as mentioned(if you want to make your network password protected)

Security Mode-WEP
Default Key-1
WEP Encrypion-64 bits 10hex digits
Key1-Enter 10 digit password(e.g-your 10 digit telephone number) and click Save Settings


If you have DSL internet connection, then all you need is to change the Step-9 and all the settings will remain same.

Step-9 (for DSL internet connection)

Internet Connection type should be selected to PPPoE and enter the Username and Password provided by your Internet Service provider. Then click Save Settings.


After completing all the above steps, turn off the Router for 30 seconds and turn it on after that. You can connect your wireless devices.

I hope this will resolve the issue.

Regards
Chiranjeet

Posted on Jun 06, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the best configuration on my linksys wrh54g? im using a xyzel PLDT MyDSL 999 as my ISP. How do iget the fastest downloading capability and connectio? thanks


You need to confirm with your ISP what their preferred settings for you router in order to achieve your fastest possible download speed.

Sep 02, 2011 | Linksys WRH54G Wireless Router

1 Answer

How to install linksys wrh54g


Welcome to FixYa! To install Linksys WRH54G, here is a manual that you can use, just click the link and it should bring you to the answer page. http://downloads.linksysbycisco.com/downloads/wrk54g-ug_web.pdf
Hope this helps! Thank you for using FixYa!

Jul 07, 2011 | Linksys WRH54G Wireless Router

1 Answer

Missing the set up cd rom


See: http://homesupport.cisco.com/en-us/wireless/lbc/WRH54G and down lo0ad manual and the CD

Dec 09, 2010 | Linksys WRH54G Wireless Router

1 Answer

I reset WRH54G. Now I got things messed up. How


There is a small hole on the back of the router. Use a straightened-out paper clip to press, and hold in foor 10 seconds. This should reset the router back to Factory Settings. Now, go ahead and repeat the setup process from the manual.

May 06, 2010 | Linksys WRH54G Wireless Router

1 Answer

How to block websites


you can login into the router setup page default address is 192.168.1.1 .Go to access restriction tab,,,you can block the sites from there

Dec 29, 2009 | Linksys WRH54G Wireless Router

1 Answer

How to configure wrh54g Wireless router?


Load your internet browser page and type in 192.168.1.1 or 192.168.1.100 one or the either. The easiestway is to go by your gateway address. Type that in and your router page will load. You will need a username and password. The default is admin on both, but if you had setup it before it will be your own. Then go to the wireless tab and follow the steps.

Nov 17, 2009 | Linksys WRH54G Wireless Router

1 Answer

Password doesn't accept


Try just using admin in the password....leave the username blank.

Apr 08, 2009 | Linksys WRH54G Wireless Router

1 Answer

Problem in connecting my linksys in a modem/router


1. Enter your router web configuration by typing "192.168.1.1" on your browser URL
2. Enter your ISP account information
3. Setup your SSID name, secure your wireless with WEP or WPA keys
4. Save settings.

Feb 27, 2009 | Linksys WRH54G Wireless Router

Not finding what you are looking for?
Linksys WRH54G Wireless Router Logo

471 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...