Question about Car Speakers & Subwoofers

1 Answer

I have a Kenwood KDC MP2035, it is brand new, I try listening to somehting plugged into the AUX but when i press SRC to select AUX, AUX does not show up, only TUNER and STANDBY are in the options so far

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 185 Answers

Here is some thing that will help u out. AUX Input: The KDC-MP2035 is equipped with a front panel 3.5mm minijack auxiliary input for connecting external portable audio devices such as an MP3 player or Tape walkman. The receiver allows you to select between the following AUX settings.

  • Off: the source button does not scroll through the AUX input when function is turned "off"
  • Aux 1: turns on the AUX input for use
  • Aux 2: turns on the AUX input in the attenuator mode - press the attenuator button to activate sound. pleas let me no if i can help any more and dont be afraidto rate me i dont bite lol just kidding

Posted on Apr 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenwood kdc-mp235 unit and I bought a cable to hook smart phone to auxiliary port, I can play a cd or tunerbut no auxiliary! How do I fix this, I push src button but I get no auxiliary selection


You have to have the deck in "standby" mode before entering the settings menu. Press the source button until Standby comes up, then press and hold the menu button. Use the 4-way switch to scroll through the menu options until you get to AUX, then press the switch to the right to turn it on.

I got this from yahoo, click here to view.

Hope it helps.

May 29, 2011 | Kenwood Car Speakers & Subwoofers

1 Answer

I have hooked up all the wires in the appropriate color-coded order and my stereo has no reception. It has power but no reception. The antenna is hooked up also. It is a Kenwood KDC 119 and the vehicle...


Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUnE" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [4] or [¢] button. During reception of stereo stations the "ST" indicator is ON. 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [4] or [¢] button. 3 Put the frequency in the memory Press the [#1] - [#6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [#1] - [#6] button.

Nov 03, 2010 | Car Speakers & Subwoofers

2 Answers

When i hook up my ipod to my kenwood kdc mp728 i cant figure out how to play it through the radio


it should be in aux try to press source buton and see if that is an option if not an alternative is to hook it up on the back of the cd player in the audio in or aux or aux 2 using a wire adapter from walmart in the car sterio section

Sep 14, 2008 | Kenwood Car Speakers & Subwoofers

1 Answer

Kenwood Kdc 237


hi i just had same problem . Its because the steroes aux port is not switched on as default.
I downloaded the pdf manual for free and went through the steps .Unit has to be in standby mode then hold the menu button down untill the menu appears select aux then turn it to either off aux1 or aux 2 and that fixed the problem for me :) goodluck

Aug 25, 2008 | Kenwood KSC-310CCS Center Channel Speaker...

1 Answer

How do i set the clock on my kenwood kdc-x492


you need to put the headunit in to STANDBY MODE then press he little DISP button to the bottom left of the volume knob. press it for a few seconds. then it will bring up a menu. hit the volume knob down a few times til you see clock set. then PRESS AND HOLD THE VOLUME KNOB IN THE CENTER then it will blink. press the volume knob up or down for hour i believe and left and right for minutes. Once thats done hit the src button again and its done!

Aug 21, 2008 | Kenwood Car Speakers & Subwoofers

5 Answers

Just installed kdc W3537 but cant figure out how to make it work with aux lead?


I've had the same problem myself but just fixed,firstly you take your instuction manual to a well ventilated area and set fire to it.Second you put your stereo in stand-by,then press and hold the menu button,and beep on or off will be displayed.Third you move the control stick situated on the right up or down until aux is displayed then just move stick left or right and it will show ...aux off...aux 1...aux 2.Choose aux 1 and away you go

Jun 17, 2008 | Car Speakers & Subwoofers

1 Answer

Kenwood KDC 237SA


You need to switch the aux function back on and to do this you need to turn the radio on to standby and press and hold the menu button for a few seconds and then use the toggle switch on the right side of the fascia to get to aux and then flick the switch forward to switch the aux on

Dec 22, 2007 | Kenwood KSC-310CCS Center Channel Speaker...

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

482 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Speakers & Subwoofers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...