Question about Startrac Fitness Products Star Trac 3900 Treadmill Remanufactured

1 Answer

Frame is cracked

I have a star trek 900 , Light institutional 95? I have had since 1997.Still works great but I have noticed that the frame is cracked, the motor needs to be cleaned and checked ,the belt is frayed and I am not too sure what condition the deck is. Do you think this star trek treadmill is worth repairing. I use it alot and its still working. If its worth repairing and cleaning ,who in Northern California works on these treadmills?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Startrac Fit... Master
  • 832 Answers

Most of the parts are still available for this unit, but It may cost depending on what actually needs to be replace. Without a diagnostic call to fully access the unit. I would say conservatively it could run between $700.00 to $1000.00 I'm in the ball park if this sounds acceptable to you. Then you need to think about how much you paid for the unit? Have you had the unit look at previously? Also look up the unit and see what it's going for on the internet. Take these suggestions and think about it. ( Not to long ) their are very good units out their. Good luck on your decision!
Regards
MAX TREADMILL

Posted on Jun 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Did any cast members of the original Star Trek series appear in The Next Generation?


DeForest Kelley appeared as Dr. McCoy in Star Trek: The Next Generation: Encounter at Farpoint (#1.1). Leonard Nimoy appeared as Spock in Star Trek: The Next Generation: Unification I (#5.7) and Star Trek: The Next Generation: Unification II (#5.8). His appearance was tied to the release of the film Star Trek VI: The Undiscovered Country. Mark Lenard appeared as Sarek in Star Trek: The Next Generation: Sarek (#3.23) and Star Trek: The Next Generation: Unification I (#5.7). James Doohan appeared as Scotty in Star Trek: The Next Generation: Relics (#6.4). Majel Barrett appeared as Federation Computer Voice (nearly all episodes) and Lwaxana Troi (8 episodes) in Star Trek: The Next Generation. Diana Muldaur who appeared as Dr. Miranda Jones in episode Star Trek: Is There in Truth No Beauty? (#3.5) and as Ann Mulhall in episode Star Trek: Return to Tomorrow (#2.20) of Star Trek, appeared as Doctor Pulaski, a recurring character, in most episodes of season 2 of Star Trek: The Next Generation, replacing Doctor Beverly Crusher (Gates McFadden) as Chief Medical Officer.

Sep 04, 2016 | Star Trek: The Next Generation (1987)

1 Answer

Need star trek 3 to work with windows 7


I actually found this looking for windows 8 64 bit.

http://www.dynaverse.net/forum/index.php/topic,163393368.0.html

Oct 19, 2013 | Activision Star Trek: Starfleet Command 3...

1 Answer

How to fix kelty meadow framed baby carrier


The frame cracked on the top tube right in the middle. As far as I can tell it was from resting on the frame at a stop light. The frame has never been crashed or fallen. I rode out to the San Clemente grand prix and noticed the crack right at the start of the race and was only 1/4 of the way around. By the end of the race the crack was about 3/4 around the TT.

Sep 07, 2012 | Kelty Meadow Framed Baby Carrier

1 Answer

I have lost my Star Trek 2 Armada cd key, the game is pretty old but I'd like to play it again.


I'm sorry but this is not a warez site...We do not give out activation keys or access codes.

Jun 22, 2012 | Activision STAR TREK : ARMADA II for...

1 Answer

2010 Yamaha V Star 950 Tourer exessive vibration


Hi, Jjlaporte and the usual suspects are:
1. Wheels and or tires worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain is badly worn or links too tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect due to a poorly tuned engine.
7. Internal engine problem flywheels have shifted.
8. Broken frame.
9. Stabilizer links worn or loose.
10. Rubber mounts loose or worn.
11. Rear fork pivot shaft nuts loose.
12. Front engine mounting bolts loose.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.ymhmotoboard.com/topic/beefing-up-v-star-950-in-the-high-end-1
Middleweight Touring Cruisers Kawasaki Vulcan 900 Classic LT Star Star 950...
2009 2012 Yamaha XVS950 Star Service Repair Manual DOWNLOAD Download... $10
OEM parts for Yamaha
YAMAHA XVS950A Owner Manual

Jun 16, 2011 | 2010 Yamaha V Star 950 Tourer

1 Answer

Star Trek The Next Generation Game Boy Manual?


here is a link to an officers manual for the game
http://www.scribd.com/doc/11303127/Star-Trek-TNG-Officers-Manual

to make it bigger go to the top right hand corner of the gray box and a popup says toggle full screen. click this and it will be bigger.

Apr 05, 2009 | Absolute Entertainment Inc. Star Trek:...

2 Answers

Trying to help my sister to install her ginius webcam, but it is not working. She installed the software driver but can't get cam to work. Anyone out there with same problem that could give us a hint will...


1. Please install the driver first and then connect VideoCAM Trek to the USB port.

2. Installing the VideoCAM Trek driver
Windows Environment
a. Insert the VideoCAM Trek Installation CD into the CD-ROM drive.
b. The Autorun screen will bring up the installation screen. Click on
Driver” then simply follow the on-screen instructions.
c. Install DirectX from the CD.
Notice: If the Autorun screen doesn’t start, please follow these
steps:
�� Click on “Start Menu”
�� Type D��\SETUP.EXE , then click Enter key.
(Assume your CD-ROM is in Drive D)
Mac Environment
a. Insert the VideoCAM Trek Installation CD into the CD-ROM
drive.
b. Double click on the CD-ROM driveglish
c. Click on the file folder of “VideoCAm Trek Driver OSX 1.0
d. Click on “VideoCAM Trek Driver Install” then simply
follow the on-screen instructions.

3. Insert the VideoCAM Trek’s USB cable to your desktop’s or
laptop’s USB port.

4. Complete software and hardware installation. You can
install the software you would like to use for video
conferencing or chat with your friends.

Hope this helps! Let me know how you make out with it!

Apr 04, 2009 | Genius VideoCAM Trek Webcam

2 Answers

Star Trek The Next Generation remote control tv codes


The link above did not work for me. So I did a little hunting and found this link

http://www.starship1701.de/tng_phas-rem.htm

Hope it helps!

Aug 25, 2008 | Novelty Star Trek THE NEXT GENERATION...

Not finding what you are looking for?
Startrac Fitness Products Star Trac 3900 Treadmill Remanufactured Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Startrac Fitness Products Exercise & Fitness Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

ka4iup
ka4iup

Level 3 Expert

3957 Answers

Techmotionusa.com
Techmotionusa.com

Level 2 Expert

161 Answers

Are you a Startrac Fitness Products Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...