Question about Kenwood KDC-X891 CD Player

2 Answers

What is the security code for kdc-891 - Kenwood KDC-X891 CD Player

Posted by on

  • yadayada
    yadayada Jun 01, 2010

    this deck did not come with a anti theft code, the owner puts that unique code in, so I must assume this is a stolen deck.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

You will need a Kenwood RC-410 remote control.
To reset the code do the following:

1) Turn on the car.
2) The faceplate rotates out and the CODE - - - - prompt appears.
3) Press >>| and Auto keys simultaneously on the faceplate and hold for 4 seconds. (If the faceplate rotates back into the console push on the upper left top edge of the faceplate and it will flip back around. Press the Eject button and then try it again.)
4) The screen will still say CODE, but the - - - - will disappear! When this happens press the 5 key on the remote twice and it enters a K on the display on the faceplate. Hit the >>| key on the faceplate.
5) Press the 2 key on the remote three times and it enters a C on the display on the faceplate. Hit the >>| key on the faceplate.
6) Press the 2 key on the remote once and it enters an A on the display on the faceplate. Hit the >>| key on the faceplate.
7) Press the 7 key on the remote twice and it enters an R on the display on the faceplate. Hit the >>| key on the faceplate.
8) The radio goes into All Off mode and you are set! Hit the SRC button on the faceplate to select CD, Radio, etc.

Posted on Jun 01, 2010

  • Jorge Santiago
    Jorge Santiago Jun 01, 2010

    first try 3051 and 1234


×

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Contributor
  • 55 Answers

Check the codes!!!!

Posted on Jul 24, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 105 Answers

SOURCE: KDC-MP735u security code

Common Kenwood Security Codes
Many Kenwood radios are configured with the same security codes:

KCAR - This seems to be a "backdoor" to some Kenwood models.
3051 - This is the security code which is printed in the manual of many Kenwood models.
1234 - This is a security code commonly chosen by Kenwood owners.
Entering Your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
Enter the security code using your Kenwood remote.
Type 2
Press the "Auto" button and "Track up" on the face of radio at the same time until the four dash lines disappear.
Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.

To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.

Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.

The key sequence to enter the security code KCAR is:

5
5
Track Up
2
2
2
Track Up
2
Track Up
7
7
Track Up
Your Kenwood should then enter tuner mode.

A Security Code Bug in some Kenwoods
There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Kenwood kdc 7024 security code


Hi Chris,

Beginning on the bottom of page 34 in the KDC-7024 manual - you'll find the details concerning the security code. if you do not recall your security code, you will probably need to contact Kenwood Car Entertainment Support for additional help.

I hope this is the info you're looking for & good luck!

Sep 22, 2011 | Kenwood KDC-7024 CD Player

3 Answers

Security code for kenwood kdc-mv6521


It actually IS very common for people to change a battery in a vehicle, as they OFTEN develop problems.

Please CLICK HERE to see a tip on bypassing Kenwood security codes, and how to obtain the code by contacting Kenwood or an authorized Retailer.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Apr 28, 2010 | Kenwood KDC-MV6521 CD Player

1 Answer

Can i enter the security code without the remote?


Yes you can usually enter the code with the channel buttons

Feb 21, 2010 | Kenwood KDC-MP3035 CD Player

1 Answer

Code for a kenwood kdc 319 cd player


i think the security code on most kenwoods is KCAR. you have to enter the code from the remote control though.

Oct 22, 2009 | Kenwood KDC-319 CD Player

1 Answer

Kenwood KDC-MP828: Security Code?


Get your money back. It is probably stolen.

Sep 14, 2009 | Kenwood KDC-MP528 CD Player

2 Answers

Security unlock code for kenwood kdc-x991


if you bought it brand new it should come with the security code. If not you can try 0000 or 1234, something easy like that is usually the case too.

Feb 23, 2009 | Kenwood KDC-X991 CD Player

1 Answer

I need the code for KDC-3028 cd player


http://techbybucky.blogspot.com/2008/01/how-to-reset-security-code-on-kenwood.html........ you may need to buy a remote for 9.50 you can find that here http://store.kenwoodusa.com/detail/KWD%20A70-2069-15
this will reset the security code on your kenwood kdc-3028

Dec 29, 2008 | Kenwood KDC-3028 CD Player

Not finding what you are looking for?
Kenwood KDC-X891 CD Player Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4874 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...