Question about Audio & Video Receivers

2 Answers

Pioneer model DEH-11 car stero procedure to set clock. I asked this before, got an answer, lost answer.

Posted by on

  • clockguyfl Apr 11, 2008

    I can see the information but cannot read it. When I print the info, it is still too small to read. How can I get a readable printout? thx - bill

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Here it is again :)
pioneer model DEH-11 car stero - moz-screenshot.jpgff7f03f.jpg

Posted on Apr 09, 2008

  • Graeme Ross
    Graeme Ross Apr 11, 2008

    Hi again, sorry the image was too small. I didn't realise myself. Here is a procedure that will work.


    For most Pioneer single CD players, you can set the clock using the following steps:




    1. Press and hold the SOURCE button until the unit shuts off.


    2. Press and hold SOURCE again until the clock appears. With some
      models you will press and hold the FUNCTION or AUDIO button instead of
      the SOURCE button.


    3. Press the left or right arrow to select the segment of time you wish to adjust.


    4. Press the up or down arrows to increase or decrease the numbers in the blinking segment.


    5. Once the clock is set correctly, press the SOURCE button to exit.

    Please change the inappropriate rating for me, I had no idea that there was a problem with the info I had given you. Thanks

    regards
    Graeme

  • Graeme Ross
    Graeme Ross Apr 11, 2008

    So how did you go with the additional instructions?

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 158 Answers

Pioneer car stereos have a reset switch(usually located on the front face plate).
after installing face plate,POWER ON,press reset switch in when the time is 12am or 12pm. the stereo clock will show 12.00
I KNOW THIS IS A DUMB QUICKFIX , BUT IT WORKS. i hope it works for u too.bye.

Posted on Apr 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

UnABLE to set the clock on my car audio system.


Here is a link to how to set the clock for your head unit.

http://www.pioneerelectronics.com/StaticFiles/Manuals/Car/DEH-P7400HD_OwnersManual112811.pdf

Mar 19, 2014 | Pioneer Deh-p7400hd In-dash Car Stereo...

11 Answers

HOW DO I FIND THE SERIAL NUMBER AND DECODE A PIONEER CAR RADIO MODEL DEH-M6106ZH


the serial number, reads in a sticker on your hardware, it may be on the top, bottom, sides or back.

For example, this is not your device, but just a example, computer cd drive
993587a.jpg

Oct 05, 2008 | Audio & Video Receivers

1 Answer

Speaker hook


Hi it's a problem in the set up . This model , like few other in the line have the possibility to switch the "back speakers" ( through harness or RCA) into "BASS SPEAKERS" what give you a possibility to hook up a Sub without an extra amp .
To switch it back just follow the Section 2 / Sw control of this link http://www.pioneerelectronics.com/StaticFiles/Manuals/Car/DEH-3300UB_OwnersManual0902.pdf

Dec 19, 2013 | Pioneer DEH-3300UB Radio-CD-MP3-Digital...

2 Answers

Pioneer Model: DEH-P8400BH


Press and hold the source button until the CD Receiver turns off. Press and hold the center of the volume knob top bring up the settings menu rotate the volume knob until Clear memory is displayed and then press the center of the volume knob Clear memory YES will be displayed, press the center of the volume knob to confirm. The display will change from Clearing to Cleared

Aug 07, 2012 | Pioneer Deh-p8400bh Cd/mp3/ Receiver W/...

1 Answer

Set the clock on the DEH 6900 ub


Setting the clock

Use these instructions to set the clock.

1 Use MULTI-CONTROL to select Clock.

2 Push MULTI-CONTROL left or right to

select the segment of the clock display you

wish to set.

Pushing MULTI-CONTROL left or right will select

one segment of the clock display:

Hour-Minute

As you select segments of the clock display

the segment selected will blink.

3 Push MULTI-CONTROL up or down to
put a clock right.

Manual on the link below.

http://a248.e.akamai.net/pix.crutchfield.com/Manuals/130/130DEHP690.PDF

Aug 07, 2011 | Pioneer Audio & Video Receivers

1 Answer

How to set a deh-p4000ub car radios clock


try this:
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal performance
from this unit.
1 Press SOURCE and hold until the unit
turns off.
2 Press SOURCE and hold until function
name appears in the display.
3 Press FUNCTION to select one of the initial
settings.
Press FUNCTION repeatedly to switch between
the following settings:
Clock—AUX (auxiliary input)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down SOURCE until the unit turns off.
Setting the clock
Use these instructions to set the clock.
1 Press FUNCTION to select clock.
2 Press c or d to select the segment of
the clock display you wish to set.
Pressing c or d will select one segment of the
clock display:
Hour—Minute
3 Press a or b to set the clock.
Turning the clock display on or off
You can turn the clock display on or off.
! Even when the sources are off, the clock
display appears on the display.
% Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.

Aug 05, 2008 | Pioneer Audio & Video Receivers

3 Answers

How to I change the clock setting for a pioneer car radio deh-2750mp


Turn on the car so the stereo is playing.
Press, and hold for a few seconds the 'SRC' button [Bottom left side of the unit face]. This will turn the radio OFF. The clock may or may not be visable at this time. If it is visable, press the 'CLK' button [top left side of the unit face] to make the clock turn OFF.
The screen should now be blank and dark.
Press the 'AUDIO' button [Top Right side of the unit face] and hold for a few seconds. This will open the functions menu. The clock setting should be first in the list. Use the arrow keys to set time and toggle between the hour and minutes.
By sequentially pressing the 'AUDIO' button, you can also set the tuning scans from 100 to 50 kHz in FM or from some other scans in AM, but there is really no need to do this.

Mar 21, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...