Question about Washing Machines

1 Answer

Perfect level sounds very strange

Today I bought Electrolux 12483 Time manager, 7kg, and during the slow spin cycles I get a noisy sound with low frequencies like the next flat neighbor banging on the wall. It is very annoying. However, I cannot hear such sound when it spins on 1200 rpm. Is this normal? It is my first Electrolux washer.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,305 Answers

Check the leveling feet on your machine. With the machine turned off, and with a small carpenter's level, check to make sure the machine is level front to back and side to side. Then give the machine a shake in each direction to make sure that the feet (which are adjustable). If the machine wobbles-even a little bit- adjust the feet until all 4 feet are in contact with the floor and the machine fails to wobble when pushed.
Rerun a load and see if the machine has stopped sending morse code...
you can also make sure that the fill hoses aren't banging into the machine or the wall during the cycle.
let me know if you have success!

Posted on Jun 01, 2010

Testimonial: "I adjusted the front just a little bit and it looks like the sound went away! I noticed also, the more load I put the less strange sound I get. THANK YOU VERY MUCH FOR THE SUPPORT AND HELP!"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn off the beeping noise on the Electrolux 7kg Time Manager washing machine the 5kg Electrolux Sensor Dryer? The beeping noises indicating a cycle has finished are very loud. Please help!


The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic signals, press "Drying level" and "Prewash" button at the same time for 6 seconds.
If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction.

Dado

Mar 06, 2016 | Electrolux Washing Machines

1 Answer

Electrolux screaching noise on spin cycle


Hello friend, thank you for your inquiry!

Based off the information you have provided you are hearing a loud screeching noise during the spin cycle on your Electrolux washer. You will hear a certain amount of motor whine during the spin cycle this is a normal operation of your appliance. -Matt

Aug 23, 2014 | Electrolux EWFLS70JRR Energy Star Front...

1 Answer

NOISY DURING SPIN CYCLE


If this sound starts slow and gets faster till its helicopter sounding you probly have a verry worn spot on the drive belt when that spot goes around the pully it will thump the faster ti spins the more frequent the sound If you tilt the washer back you should be able to see the belt to examine it if this the problem
replace the belt
Hope this helps
please leave feedback

Nov 27, 2009 | Maytag Legacy Series Top Load Washer

1 Answer

Washing machine drum out of balance when spinning. have balanced machine and it does not vibrate or jump around. worse when on slow spin, real knocking sound


mine is also making noise during the spin cycle. Just paid $95AUD for the repairman to tell me it needs news bearings and that will be a further $300!

Oct 10, 2009 | Electrolux Washing Machines

1 Answer

Very Noisy Operation


you will have to access the bottom of the agitator from the back of the machine. Either you have loose bolts or else you agitator bearings are shot

Jan 28, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Won't spin or agitate


Sounds like a burning out motor to me...

Jul 26, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Noisy Spin Cycle


hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jun 12, 2008 | Whirlpool LSR9434PQ Top Load Washer

1 Answer

Washer just fills up and that is it


Sounds like a winding on the motor is burned out or the timer is defective. The motor uses a low power circuit during the delicate cycle both during wash and spin. The timer selects which winding is energized (fast or slow).

Feb 05, 2007 | Maytag LAT3600A Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Brad Brown

Level 3 Expert

16135 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...